X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2Fwan%2FKconfig;h=21f76f51c95e4efd26c4466330e74a63d322f42d;hb=ed407717852895e04f9e088e09a4f27bb56712b7;hp=54b8e492ef97dca1b16c99441f674a76767ea963;hpb=b20e481ab595e9667c33e2393bdfe9a31870d11f;p=linux-2.6
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 54b8e492ef..21f76f51c9 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -57,44 +57,6 @@ config COSA
The driver will be compiled as a module: the
module will be called cosa.
-config DSCC4
- tristate "Etinc PCISYNC serial board support"
- depends on WAN && PCI && m
- help
- Driver for Etinc PCISYNC boards based on the Infineon (ex. Siemens)
- DSCC4 chipset.
-
- This is supposed to work with the four port card. Take a look at
- for further information about the
- driver.
-
- To compile this driver as a module, choose M here: the
- module will be called dscc4.
-
-config DSCC4_PCISYNC
- bool "Etinc PCISYNC features"
- depends on DSCC4
- help
- Due to Etinc's design choice for its PCISYNC cards, some operations
- are only allowed on specific ports of the DSCC4. This option is the
- only way for the driver to know that it shouldn't return a success
- code for these operations.
-
- Please say Y if your card is an Etinc's PCISYNC.
-
-config DSCC4_PCI_RST
- bool "Hard reset support"
- depends on DSCC4
- help
- Various DSCC4 bugs forbid any reliable software reset of the ASIC.
- As a replacement, some vendors provide a way to assert the PCI #RST
- pin of DSCC4 through the GPIO port of the card. If you choose Y,
- the driver will make use of this feature before module removal
- (i.e. rmmod). The feature is known to be available on Commtech's
- cards. Contact your manufacturer for details.
-
- Say Y if your card supports this feature.
-
#
# Lan Media's board. Currently 1000, 1200, 5200, 5245
#
@@ -127,7 +89,7 @@ config LANMEDIA
# There is no way to detect a Sealevel board. Force it modular
config SEALEVEL_4021
tristate "Sealevel Systems 4021 support"
- depends on WAN && ISA && m && ISA_DMA_API
+ depends on WAN && ISA && m && ISA_DMA_API && INET
help
This is a driver for the Sealevel Systems ACB 56 serial I/O adapter.
@@ -154,7 +116,7 @@ config HDLC
If unsure, say N.
config HDLC_RAW
- bool "Raw HDLC support"
+ tristate "Raw HDLC support"
depends on HDLC
help
Generic HDLC driver supporting raw HDLC over WAN connections.
@@ -162,7 +124,7 @@ config HDLC_RAW
If unsure, say N.
config HDLC_RAW_ETH
- bool "Raw HDLC Ethernet device support"
+ tristate "Raw HDLC Ethernet device support"
depends on HDLC
help
Generic HDLC driver supporting raw HDLC Ethernet device emulation
@@ -173,7 +135,7 @@ config HDLC_RAW_ETH
If unsure, say N.
config HDLC_CISCO
- bool "Cisco HDLC support"
+ tristate "Cisco HDLC support"
depends on HDLC
help
Generic HDLC driver supporting Cisco HDLC over WAN connections.
@@ -181,7 +143,7 @@ config HDLC_CISCO
If unsure, say N.
config HDLC_FR
- bool "Frame Relay support"
+ tristate "Frame Relay support"
depends on HDLC
help
Generic HDLC driver supporting Frame Relay over WAN connections.
@@ -189,7 +151,7 @@ config HDLC_FR
If unsure, say N.
config HDLC_PPP
- bool "Synchronous Point-to-Point Protocol (PPP) support"
+ tristate "Synchronous Point-to-Point Protocol (PPP) support"
depends on HDLC
help
Generic HDLC driver supporting PPP over WAN connections.
@@ -197,7 +159,7 @@ config HDLC_PPP
If unsure, say N.
config HDLC_X25
- bool "X.25 protocol support"
+ tristate "X.25 protocol support"
depends on HDLC && (LAPB=m && HDLC=m || LAPB=y)
help
Generic HDLC driver supporting X.25 over WAN connections.
@@ -323,6 +285,44 @@ config FARSYNC
To compile this driver as a module, choose M here: the
module will be called farsync.
+config DSCC4
+ tristate "Etinc PCISYNC serial board support"
+ depends on HDLC && PCI && m
+ help
+ Driver for Etinc PCISYNC boards based on the Infineon (ex. Siemens)
+ DSCC4 chipset.
+
+ This is supposed to work with the four port card. Take a look at
+ for further information about the
+ driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dscc4.
+
+config DSCC4_PCISYNC
+ bool "Etinc PCISYNC features"
+ depends on DSCC4
+ help
+ Due to Etinc's design choice for its PCISYNC cards, some operations
+ are only allowed on specific ports of the DSCC4. This option is the
+ only way for the driver to know that it shouldn't return a success
+ code for these operations.
+
+ Please say Y if your card is an Etinc's PCISYNC.
+
+config DSCC4_PCI_RST
+ bool "Hard reset support"
+ depends on DSCC4
+ help
+ Various DSCC4 bugs forbid any reliable software reset of the ASIC.
+ As a replacement, some vendors provide a way to assert the PCI #RST
+ pin of DSCC4 through the GPIO port of the card. If you choose Y,
+ the driver will make use of this feature before module removal
+ (i.e. rmmod). The feature is known to be available on Commtech's
+ cards. Contact your manufacturer for details.
+
+ Say Y if your card supports this feature.
+
config DLCI
tristate "Frame Relay DLCI support"
depends on WAN
@@ -382,7 +382,7 @@ config SDLA
# Wan router core.
config WAN_ROUTER_DRIVERS
- bool "WAN router drivers"
+ tristate "WAN router drivers"
depends on WAN && WAN_ROUTER
---help---
Connect LAN to WAN via Linux box.
@@ -393,7 +393,8 @@ config WAN_ROUTER_DRIVERS
.
Note that the answer to this question won't directly affect the
- kernel: saying N will just cause the configurator to skip all
+ kernel except for how subordinate drivers may be built:
+ saying N will just cause the configurator to skip all
the questions about WAN router drivers.
If unsure, say N.