X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2FKconfig;h=734f8403c806cd0fcf5a22757991d2b26fbebdfb;hb=df570f93337ddb46f1e30dd167c27b5fdcec637b;hp=81ef81c9a5841904887b70a3d37470a624467fbf;hpb=2f63251ed0a803ddbe7bf2577b69d467aa872f68;p=linux-2.6 diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 81ef81c9a5..734f8403c8 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -135,6 +135,12 @@ config TUN If you don't know what to use this for, you don't need it. +config VETH + tristate "Virtual ethernet device" + ---help--- + The device is an ethernet tunnel. Devices are created in pairs. When + one end receives the packet it appears on its pair and vice versa. + config NET_SB1000 tristate "General Instruments Surfboard 1000" depends on PNP @@ -480,26 +486,6 @@ config SGI_IOC3_ETH the Ethernet-HOWTO, available from . -config SGI_IOC3_ETH_HW_RX_CSUM - bool "Receive hardware checksums" - depends on SGI_IOC3_ETH && INET - default y - help - The SGI IOC3 network adapter supports TCP and UDP checksums in - hardware to offload processing of these checksums from the CPU. At - the moment only acceleration of IPv4 is supported. This option - enables offloading for checksums on receive. If unsure, say Y. - -config SGI_IOC3_ETH_HW_TX_CSUM - bool "Transmit hardware checksums" - depends on SGI_IOC3_ETH && INET - default y - help - The SGI IOC3 network adapter supports TCP and UDP checksums in - hardware to offload processing of these checksums from the CPU. At - the moment only acceleration of IPv4 is supported. This option - enables offloading for checksums on transmit. If unsure, say Y. - config MIPS_SIM_NET tristate "MIPS simulator Network device" depends on MIPS_SIM @@ -1968,6 +1954,16 @@ menuconfig NETDEV_1000 bool "Ethernet (1000 Mbit)" depends on !UML default y + ---help--- + Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common + type of Local Area Network (LAN) in universities and companies. + + Say Y here to get to see options for Gigabit Ethernet drivers. + This option alone does not add any kernel code. + Note that drivers supporting both 100 and 1000 MBit may be listed + under "Ethernet (10 or 100MBit)" instead. + + If you say N, all options in this submenu will be skipped and disabled. if NETDEV_1000 @@ -2167,7 +2163,7 @@ config SKGE with better performance and more complete ethtool support. It does not support the link failover and network management - features available in the hardware. + features that "portable" vendor supplied sk98lin driver does. This driver supports adapters based on the original Yukon chipset: Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T, @@ -2205,6 +2201,93 @@ config SKY2_DEBUG If unsure, say N. +config SK98LIN + tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)" + depends on PCI + ---help--- + Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx + compliant Gigabit Ethernet Adapter. + + This driver supports the original Yukon chipset. This driver is + deprecated and will be removed from the kernel in the near future, + it has been replaced by the skge driver. skge is cleaner and + seems to work better. + + This driver does not support the newer Yukon2 chipset. A separate + driver, sky2, is provided to support Yukon2-based adapters. + + The following adapters are supported by this driver: + - 3Com 3C940 Gigabit LOM Ethernet Adapter + - 3Com 3C941 Gigabit LOM Ethernet Adapter + - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter + - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter + - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter + - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter + - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter + - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter + - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter + - Allied Telesyn AT-2971T Gigabit Ethernet Adapter + - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45 + - EG1032 v2 Instant Gigabit Network Adapter + - EG1064 v2 Instant Gigabit Network Adapter + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill) + - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel) + - Marvell RDK-8001 Adapter + - Marvell RDK-8002 Adapter + - Marvell RDK-8003 Adapter + - Marvell RDK-8004 Adapter + - Marvell RDK-8006 Adapter + - Marvell RDK-8007 Adapter + - Marvell RDK-8008 Adapter + - Marvell RDK-8009 Adapter + - Marvell RDK-8010 Adapter + - Marvell RDK-8011 Adapter + - Marvell RDK-8012 Adapter + - Marvell RDK-8052 Adapter + - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit) + - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit) + - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L) + - SK-9521 10/100/1000Base-T Adapter + - SK-9521 V2.0 10/100/1000Base-T Adapter + - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T) + - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter + - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link) + - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX) + - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter + - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link) + - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX) + - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter + - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link) + - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter + - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition) + - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter + - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link) + - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX) + - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter + - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link) + - SMC EZ Card 1000 (SMC9452TXV.2) + + The adapters support Jumbo Frames. + The dual link adapters support link-failover and dual port features. + Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support + the scatter-gather functionality with sendfile(). Please refer to + for more information about + optional driver parameters. + Questions concerning this driver may be addressed to: + + + If you want to compile this driver as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read . The module will + be called sk98lin. This is recommended. + config VIA_VELOCITY tristate "VIA Velocity support" depends on PCI @@ -2339,6 +2422,11 @@ menuconfig NETDEV_10000 bool "Ethernet (10000 Mbit)" depends on !UML default y + ---help--- + Say Y here to get to see options for 10 Gigabit Ethernet drivers. + This option alone does not add any kernel code. + + If you say N, all options in this submenu will be skipped and disabled. if NETDEV_10000 @@ -2399,6 +2487,7 @@ config CHELSIO_T3 config EHEA tristate "eHEA Ethernet support" depends on IBMEBUS + select INET_LRO ---help--- This driver supports the IBM pSeries eHEA ethernet adapter. @@ -2474,6 +2563,7 @@ config MYRI10GE depends on PCI select FW_LOADER select CRC32 + select INET_LRO ---help--- This driver supports Myricom Myri-10G Dual Protocol interface in Ethernet mode. If the eeprom on your board is not recent enough, @@ -2972,6 +3062,16 @@ config NETCONSOLE If you want to log kernel messages over the network, enable this. See for details. +config NETCONSOLE_DYNAMIC + bool "Dynamic reconfiguration of logging targets (EXPERIMENTAL)" + depends on NETCONSOLE && SYSFS && EXPERIMENTAL + select CONFIGFS_FS + help + This option enables the ability to dynamically reconfigure target + parameters (interface, IP addresses, port numbers, MAC addresses) + at runtime through a userspace interface exported using configfs. + See for details. + config NETPOLL def_bool NETCONSOLE