X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2F8390.h;h=8e209f5e7c1179e26eceef42f5abf250372db91e;hb=837b41b5de356aa67abb2cadb5eef3efc7776f91;hp=414de5bd228fae2dd1a2e3615ee4741d7f47aeee;hpb=ea14fad0d416354a4e9bb1a04f32acba706f9548;p=linux-2.6

diff --git a/drivers/net/8390.h b/drivers/net/8390.h
index 414de5bd22..8e209f5e7c 100644
--- a/drivers/net/8390.h
+++ b/drivers/net/8390.h
@@ -30,8 +30,10 @@ extern int ei_debug;
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 extern void ei_poll(struct net_device *dev);
+extern void eip_poll(struct net_device *dev);
 #endif
 
+/* Without I/O delay - non ISA or later chips */
 extern void NS8390_init(struct net_device *dev, int startp);
 extern int ei_open(struct net_device *dev);
 extern int ei_close(struct net_device *dev);
@@ -42,6 +44,17 @@ static inline struct net_device *alloc_ei_netdev(void)
 	return __alloc_ei_netdev(0);
 }
 
+/* With I/O delay form */
+extern void NS8390p_init(struct net_device *dev, int startp);
+extern int eip_open(struct net_device *dev);
+extern int eip_close(struct net_device *dev);
+extern irqreturn_t eip_interrupt(int irq, void *dev_id);
+extern struct net_device *__alloc_eip_netdev(int size);
+static inline struct net_device *alloc_eip_netdev(void)
+{
+	return __alloc_eip_netdev(0);
+}
+
 /* You have one of these per-board */
 struct ei_device {
 	const char *name;
@@ -69,10 +82,12 @@ struct ei_device {
 	unsigned char reg0;		/* Register '0' in a WD8013 */
 	unsigned char reg5;		/* Register '5' in a WD8013 */
 	unsigned char saved_irq;	/* Original dev->irq value. */
-	struct net_device_stats stat;	/* The new statistics table. */
 	u32 *reg_offset;		/* Register mapping table */
 	spinlock_t page_lock;		/* Page register locks */
 	unsigned long priv;		/* Private field to store bus IDs etc. */
+#ifdef AX88796_PLATFORM
+	unsigned char rxcr_base;	/* default value for RXCR */
+#endif
 };
 
 /* The maximum number of 8390 interrupt service routines called per IRQ. */
@@ -86,11 +101,19 @@ struct ei_device {
 /* Some generic ethernet register configurations. */
 #define E8390_TX_IRQ_MASK	0xa	/* For register EN0_ISR */
 #define E8390_RX_IRQ_MASK	0x5
+
+#ifdef AX88796_PLATFORM
+#define E8390_RXCONFIG		(ei_status.rxcr_base | 0x04)
+#define E8390_RXOFF		(ei_status.rxcr_base | 0x20)
+#else
 #define E8390_RXCONFIG		0x4	/* EN0_RXCR: broadcasts, no multicast,errors */
 #define E8390_RXOFF		0x20	/* EN0_RXCR: Accept no packets */
+#endif
+
 #define E8390_TXCONFIG		0x00	/* EN0_TXCR: Normal transmit mode */
 #define E8390_TXOFF		0x02	/* EN0_TXCR: Transmitter off */
 
+
 /*  Register accessed at EN_CMD, the 8390 base addr.  */
 #define E8390_STOP	0x01	/* Stop and reset the chip */
 #define E8390_START	0x02	/* Start the chip, clear reset */
@@ -105,13 +128,14 @@ struct ei_device {
 /*
  *	Only generate indirect loads given a machine that needs them.
  *      - removed AMIGA_PCMCIA from this list, handled as ISA io now
+ *	- the _p for generates no delay by default 8390p.c overrides this.
  */
 
 #ifndef ei_inb
 #define ei_inb(_p)	inb(_p)
 #define ei_outb(_v,_p)	outb(_v,_p)
-#define ei_inb_p(_p)	inb_p(_p)
-#define ei_outb_p(_v,_p) outb_p(_v,_p)
+#define ei_inb_p(_p)	inb(_p)
+#define ei_outb_p(_v,_p) outb(_v,_p)
 #endif
 
 #ifndef EI_SHIFT