X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fmtd%2Fnand%2FKconfig;h=5076faf9ca66c54ae300d960f5befccbfc01fb55;hb=9063974cdbc5463528cb6aa60c91bc0267af7bbb;hp=246d4512f64bfd8670a5731809d1280cd2cbfcaa;hpb=37e58df30063e229ee5157f9d1c1fa1d749917c2;p=linux-2.6

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 246d4512f6..5076faf9ca 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -93,7 +93,7 @@ config MTD_NAND_AU1550
 
 config MTD_NAND_BF5XX
 	tristate "Blackfin on-chip NAND Flash Controller driver"
-	depends on BF54x && MTD_NAND
+	depends on (BF54x || BF52x) && MTD_NAND
 	help
 	  This enables the Blackfin on-chip NAND flash controller
 
@@ -278,11 +278,65 @@ config MTD_NAND_AT91
 	help
 	  Enables support for NAND Flash / Smart Media Card interface
 	  on Atmel AT91 processors.
+choice
+	prompt "ECC management for NAND Flash / SmartMedia on AT91"
+	depends on MTD_NAND_AT91
+
+config MTD_NAND_AT91_ECC_HW
+	bool "Hardware ECC"
+	depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260
+	help
+	  Uses hardware ECC provided by the at91sam9260/at91sam9263 chip
+	  instead of software ECC.
+	  The hardware ECC controller is capable of single bit error
+	  correction and 2-bit random detection per page.
+
+	  NB : hardware and software ECC schemes are incompatible.
+	  If you switch from one to another, you'll have to erase your
+	  mtd partition.
+
+	  If unsure, say Y
+
+config MTD_NAND_AT91_ECC_SOFT
+	bool "Software ECC"
+	help
+	  Uses software ECC.
+
+	  NB : hardware and software ECC schemes are incompatible.
+	  If you switch from one to another, you'll have to erase your
+	  mtd partition.
+
+config MTD_NAND_AT91_ECC_NONE
+	bool "No ECC (testing only, DANGEROUS)"
+	depends on DEBUG_KERNEL
+	help
+	  No ECC will be used.
+	  It's not a good idea and it should be reserved for testing
+	  purpose only.
+
+	  If unsure, say N
+
+	  endchoice
+
+endchoice
+
+config MTD_NAND_PXA3xx
+	bool "Support for NAND flash devices on PXA3xx"
+	depends on MTD_NAND && PXA3xx
+	help
+	  This enables the driver for the NAND flash device found on
+	  PXA3xx processors
 
 config MTD_NAND_CM_X270
 	tristate "Support for NAND Flash on CM-X270 modules"
 	depends on MTD_NAND && MACH_ARMCORE
 
+config MTD_NAND_PASEMI
+	tristate "NAND support for PA Semi PWRficient"
+	depends on MTD_NAND && PPC_PASEMI
+	help
+	  Enables support for NAND Flash interface on PA Semi PWRficient
+	  based boards
 
 config MTD_NAND_NANDSIM
 	tristate "Support for NAND Flash Simulator"
@@ -306,4 +360,30 @@ config MTD_ALAUDA
 	  These two (and possibly other) Alauda-based cardreaders for
 	  SmartMedia and xD allow raw flash access.
 
+config MTD_NAND_ORION
+	tristate "NAND Flash support for Marvell Orion SoC"
+	depends on PLAT_ORION && MTD_NAND
+	help
+	  This enables the NAND flash controller on Orion machines.
+
+	  No board specific support is done by this driver, each board
+	  must advertise a platform_device for the driver to attach.
+
+config MTD_NAND_FSL_ELBC
+	tristate "NAND support for Freescale eLBC controllers"
+	depends on MTD_NAND && PPC_OF
+	help
+	  Various Freescale chips, including the 8313, include a NAND Flash
+	  Controller Module with built-in hardware ECC capabilities.
+	  Enabling this option will enable you to use this to control
+	  external NAND devices.
+
+config MTD_NAND_FSL_UPM
+	tristate "Support for NAND on Freescale UPM"
+	depends on MTD_NAND && OF_GPIO && (PPC_83xx || PPC_85xx)
+	select FSL_LBC
+	help
+	  Enables support for NAND Flash chips wired onto Freescale PowerPC
+	  processor localbus with User-Programmable Machine support.
+
 endif # MTD_NAND