X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fmtd%2Fmaps%2FKconfig;h=df8e00bba07b2726f71fbf02b6b1d27ff0cf396a;hb=50cb993ea6cd187bfed085cb3e0747066edeb02f;hp=1bd69aa9e22acd2905a28e0e5c76d27d0bd00c94;hpb=d9cadb0d2ffed847851945a66e80d0b9d767611c;p=linux-2.6

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 1bd69aa9e2..df8e00bba0 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -1,5 +1,4 @@
 # drivers/mtd/maps/Kconfig
-# $Id: Kconfig,v 1.61 2005/11/07 11:14:26 gleixner Exp $
 
 menu "Mapping drivers for chip access"
 	depends on MTD!=n
@@ -258,13 +257,6 @@ config MTD_ALCHEMY
 	help
 	  Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
 
-config MTD_MTX1
-	tristate "4G Systems MTX-1 Flash device"
-	depends on MIPS_MTX1 && MTD_CFI
-	help
-	  Flash memory access on 4G Systems MTX-1 Board. If you have one of
-	  these boards and would like to use the flash chips on it, say 'Y'.
-
 config MTD_DILNETPC
 	tristate "CFI Flash device mapped on DIL/Net PC"
 	depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT
@@ -374,7 +366,7 @@ config MTD_REDWOOD
 
 config MTD_SOLUTIONENGINE
 	tristate "CFI Flash device mapped on Hitachi SolutionEngine"
-	depends on SUPERH && MTD_CFI && MTD_REDBOOT_PARTS
+	depends on SUPERH && SOLUTION_ENGINE && MTD_CFI && MTD_REDBOOT_PARTS
 	help
 	  This enables access to the flash chips on the Hitachi SolutionEngine and
 	  similar boards. Say 'Y' if you are building a kernel for such a board.
@@ -480,13 +472,6 @@ config MTD_H720X
 	  This enables access to the flash chips on the Hynix evaluation boards.
 	  If you have such a board, say 'Y'.
 
-config MTD_MPC1211
-	tristate "CFI Flash device mapped on Interface MPC-1211"
-	depends on SH_MPC1211 && MTD_CFI
-	help
-	  This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
-	  If you have such a board, say 'Y'.
-
 config MTD_OMAP_NOR
 	tristate "TI OMAP board mappings"
 	depends on MTD_CFI && ARCH_OMAP
@@ -524,6 +509,17 @@ config MTD_PCMCIA_ANONYMOUS
 
 	  If unsure, say N.
 
+config MTD_BFIN_ASYNC
+	tristate "Blackfin BF533-STAMP Flash Chip Support"
+	depends on BFIN533_STAMP && MTD_CFI
+	select MTD_PARTITIONS
+	default y
+	help
+	  Map driver which allows for simultaneous utilization of
+	  ethernet and CFI parallel flash.
+
+	  If compiled as a module, it will be called bfin-async-flash.
+
 config MTD_UCLINUX
 	tristate "Generic uClinux RAM/ROM filesystem support"
 	depends on MTD_PARTITIONS && !MMU
@@ -553,24 +549,6 @@ config MTD_DMV182
         help
           Map driver for Dy-4 SVME/DMV-182 board.
 
-config MTD_BAST
-	tristate "Map driver for Simtec BAST (EB2410ITX) or Thorcom VR1000"
-	depends on ARCH_BAST || MACH_VR1000
-	select MTD_PARTITIONS
-	select MTD_MAP_BANK_WIDTH_16
-	select MTD_JEDECPROBE
-	help
-	  Map driver for NOR flash on the Simtec BAST (EB2410ITX), or the
-	  Thorcom VR1000
-
-	  Note, this driver *cannot* over-ride the WP link on the
-	  board, or currently detect the state of the link.
-
-config MTD_BAST_MAXSIZE
-	int "Maximum size for BAST flash area (MiB)"
-	depends on MTD_BAST
-	default "4"
-
 config MTD_SHARP_SL
 	tristate "ROM mapped on Sharp SL Series"
 	depends on ARCH_PXA