X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fmmc%2Fcore%2Fsdio_io.c;h=f61fc2d4cd0a649a02e8e2acc10da53a7ffe7c2a;hb=4fb8af10d0fd09372d52966b76922b9e82bbc950;hp=625b92ce9cef2abedbaf853f2e0d2ba6dc7a7314;hpb=dcf397f037f52add9945eced57ca300ab6a4413c;p=linux-2.6 diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c index 625b92ce9c..f61fc2d4cd 100644 --- a/drivers/mmc/core/sdio_io.c +++ b/drivers/mmc/core/sdio_io.c @@ -1,7 +1,7 @@ /* * linux/drivers/mmc/core/sdio_io.c * - * Copyright 2007 Pierre Ossman + * Copyright 2007-2008 Pierre Ossman * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -76,11 +76,7 @@ int sdio_enable_func(struct sdio_func *func) if (ret) goto err; - /* - * FIXME: This should timeout based on information in the CIS, - * but we don't have card to parse that yet. - */ - timeout = jiffies + HZ; + timeout = jiffies + msecs_to_jiffies(func->enable_timeout); while (1) { ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IORx, 0, ®); @@ -167,10 +163,8 @@ int sdio_set_block_size(struct sdio_func *func, unsigned blksz) return -EINVAL; if (blksz == 0) { - blksz = min(min( - func->max_blksize, - func->card->host->max_blk_size), - 512u); + blksz = min(func->max_blksize, func->card->host->max_blk_size); + blksz = min(blksz, 512u); } ret = mmc_io_rw_direct(func->card, 1, 0, @@ -186,9 +180,116 @@ int sdio_set_block_size(struct sdio_func *func, unsigned blksz) func->cur_blksize = blksz; return 0; } - EXPORT_SYMBOL_GPL(sdio_set_block_size); +/* + * Calculate the maximum byte mode transfer size + */ +static inline unsigned int sdio_max_byte_size(struct sdio_func *func) +{ + unsigned mval = min(func->card->host->max_seg_size, + func->card->host->max_blk_size); + mval = min(mval, func->max_blksize); + return min(mval, 512u); /* maximum size for byte mode */ +} + +/** + * sdio_align_size - pads a transfer size to a more optimal value + * @func: SDIO function + * @sz: original transfer size + * + * Pads the original data size with a number of extra bytes in + * order to avoid controller bugs and/or performance hits + * (e.g. some controllers revert to PIO for certain sizes). + * + * If possible, it will also adjust the size so that it can be + * handled in just a single request. + * + * Returns the improved size, which might be unmodified. + */ +unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz) +{ + unsigned int orig_sz; + unsigned int blk_sz, byte_sz; + unsigned chunk_sz; + + orig_sz = sz; + + /* + * Do a first check with the controller, in case it + * wants to increase the size up to a point where it + * might need more than one block. + */ + sz = mmc_align_data_size(func->card, sz); + + /* + * If we can still do this with just a byte transfer, then + * we're done. + */ + if (sz <= sdio_max_byte_size(func)) + return sz; + + if (func->card->cccr.multi_block) { + /* + * Check if the transfer is already block aligned + */ + if ((sz % func->cur_blksize) == 0) + return sz; + + /* + * Realign it so that it can be done with one request, + * and recheck if the controller still likes it. + */ + blk_sz = ((sz + func->cur_blksize - 1) / + func->cur_blksize) * func->cur_blksize; + blk_sz = mmc_align_data_size(func->card, blk_sz); + + /* + * This value is only good if it is still just + * one request. + */ + if ((blk_sz % func->cur_blksize) == 0) + return blk_sz; + + /* + * We failed to do one request, but at least try to + * pad the remainder properly. + */ + byte_sz = mmc_align_data_size(func->card, + sz % func->cur_blksize); + if (byte_sz <= sdio_max_byte_size(func)) { + blk_sz = sz / func->cur_blksize; + return blk_sz * func->cur_blksize + byte_sz; + } + } else { + /* + * We need multiple requests, so first check that the + * controller can handle the chunk size; + */ + chunk_sz = mmc_align_data_size(func->card, + sdio_max_byte_size(func)); + if (chunk_sz == sdio_max_byte_size(func)) { + /* + * Fix up the size of the remainder (if any) + */ + byte_sz = orig_sz % chunk_sz; + if (byte_sz) { + byte_sz = mmc_align_data_size(func->card, + byte_sz); + } + + return (orig_sz / chunk_sz) * chunk_sz + byte_sz; + } + } + + /* + * The controller is simply incapable of transferring the size + * we want in decent manner, so just return the original size. + */ + return orig_sz; +} +EXPORT_SYMBOL_GPL(sdio_align_size); + /* Split an arbitrarily sized data transfer into several * IO_RW_EXTENDED commands. */ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write, @@ -199,14 +300,13 @@ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write, int ret; /* Do the bulk of the transfer using block mode (if supported). */ - if (func->card->cccr.multi_block) { + if (func->card->cccr.multi_block && (size > sdio_max_byte_size(func))) { /* Blocks per command is limited by host count, host transfer * size (we only use a single sg entry) and the maximum for * IO_RW_EXTENDED of 511 blocks. */ - max_blocks = min(min( - func->card->host->max_blk_count, - func->card->host->max_seg_size / func->cur_blksize), - 511u); + max_blocks = min(func->card->host->max_blk_count, + func->card->host->max_seg_size / func->cur_blksize); + max_blocks = min(max_blocks, 511u); while (remainder > func->cur_blksize) { unsigned blocks; @@ -231,11 +331,7 @@ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write, /* Write the remainder using byte mode. */ while (remainder > 0) { - size = remainder; - if (size > func->cur_blksize) - size = func->cur_blksize; - if (size > 512) - size = 512; /* maximum size for byte mode */ + size = min(remainder, sdio_max_byte_size(func)); ret = mmc_io_rw_extended(func->card, write, func->num, addr, incr_addr, buf, 1, size); @@ -260,11 +356,10 @@ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write, * function. If there is a problem reading the address, 0xff * is returned and @err_ret will contain the error code. */ -unsigned char sdio_readb(struct sdio_func *func, unsigned int addr, - int *err_ret) +u8 sdio_readb(struct sdio_func *func, unsigned int addr, int *err_ret) { int ret; - unsigned char val; + u8 val; BUG_ON(!func); @@ -293,8 +388,7 @@ EXPORT_SYMBOL_GPL(sdio_readb); * function. @err_ret will contain the status of the actual * transfer. */ -void sdio_writeb(struct sdio_func *func, unsigned char b, unsigned int addr, - int *err_ret) +void sdio_writeb(struct sdio_func *func, u8 b, unsigned int addr, int *err_ret) { int ret; @@ -355,7 +449,6 @@ int sdio_readsb(struct sdio_func *func, void *dst, unsigned int addr, { return sdio_io_rw_ext_helper(func, 0, addr, 0, dst, count); } - EXPORT_SYMBOL_GPL(sdio_readsb); /** @@ -385,8 +478,7 @@ EXPORT_SYMBOL_GPL(sdio_writesb); * function. If there is a problem reading the address, 0xffff * is returned and @err_ret will contain the error code. */ -unsigned short sdio_readw(struct sdio_func *func, unsigned int addr, - int *err_ret) +u16 sdio_readw(struct sdio_func *func, unsigned int addr, int *err_ret) { int ret; @@ -400,7 +492,7 @@ unsigned short sdio_readw(struct sdio_func *func, unsigned int addr, return 0xFFFF; } - return le16_to_cpu(*(u16*)func->tmpbuf); + return le16_to_cpup((__le16 *)func->tmpbuf); } EXPORT_SYMBOL_GPL(sdio_readw); @@ -415,12 +507,11 @@ EXPORT_SYMBOL_GPL(sdio_readw); * function. @err_ret will contain the status of the actual * transfer. */ -void sdio_writew(struct sdio_func *func, unsigned short b, unsigned int addr, - int *err_ret) +void sdio_writew(struct sdio_func *func, u16 b, unsigned int addr, int *err_ret) { int ret; - *(u16*)func->tmpbuf = cpu_to_le16(b); + *(__le16 *)func->tmpbuf = cpu_to_le16(b); ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 2); if (err_ret) @@ -439,8 +530,7 @@ EXPORT_SYMBOL_GPL(sdio_writew); * 0xffffffff is returned and @err_ret will contain the error * code. */ -unsigned long sdio_readl(struct sdio_func *func, unsigned int addr, - int *err_ret) +u32 sdio_readl(struct sdio_func *func, unsigned int addr, int *err_ret) { int ret; @@ -454,7 +544,7 @@ unsigned long sdio_readl(struct sdio_func *func, unsigned int addr, return 0xFFFFFFFF; } - return le32_to_cpu(*(u32*)func->tmpbuf); + return le32_to_cpup((__le32 *)func->tmpbuf); } EXPORT_SYMBOL_GPL(sdio_readl); @@ -469,12 +559,11 @@ EXPORT_SYMBOL_GPL(sdio_readl); * function. @err_ret will contain the status of the actual * transfer. */ -void sdio_writel(struct sdio_func *func, unsigned long b, unsigned int addr, - int *err_ret) +void sdio_writel(struct sdio_func *func, u32 b, unsigned int addr, int *err_ret) { int ret; - *(u32*)func->tmpbuf = cpu_to_le32(b); + *(__le32 *)func->tmpbuf = cpu_to_le32(b); ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 4); if (err_ret)