X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fmedia%2Fvideo%2Fpvrusb2%2FKconfig;h=3432b25becc657d86a492fb5a02a5009222aef1c;hb=bc4b02caa875f8e2146c724a931f32b087d7e9b0;hp=a52171ef6134ca6bf77c1c82f3f972e65209e9e5;hpb=faa1cb2039141030c7179b530ea4c63246847bc3;p=linux-2.6

diff --git a/drivers/media/video/pvrusb2/Kconfig b/drivers/media/video/pvrusb2/Kconfig
index a52171ef61..3432b25bec 100644
--- a/drivers/media/video/pvrusb2/Kconfig
+++ b/drivers/media/video/pvrusb2/Kconfig
@@ -1,10 +1,14 @@
 config VIDEO_PVRUSB2
 	tristate "Hauppauge WinTV-PVR USB2 support"
-	depends on VIDEO_V4L2 && USB && I2C && EXPERIMENTAL
+	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
 	select FW_LOADER
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_CX2341X
+	select VIDEO_SAA711X
+	select VIDEO_CX25840
+	select VIDEO_MSP3400
+	select VIDEO_WM8775
 	---help---
 	  This is a video4linux driver for Conexant 23416 based
 	  usb2 personal video recorder devices.
@@ -12,39 +16,31 @@ config VIDEO_PVRUSB2
 	  To compile this driver as a module, choose M here: the
 	  module will be called pvrusb2
 
-config VIDEO_PVRUSB2_29XXX
-	bool "Hauppauge WinTV-PVR USB2 support for 29xxx model series"
+config VIDEO_PVRUSB2_ONAIR_CREATOR
+	bool "pvrusb2 driver support for OnAir Creator model"
 	depends on VIDEO_PVRUSB2 && EXPERIMENTAL
 	select VIDEO_SAA711X
-	select VIDEO_MSP3400
+	select VIDEO_CS53L32A
 	---help---
-	  This option enables support for WinTV-PVR USB2 devices whose 
-	  model number is of the form "29xxx" (leading prefix of "29" 
-	  followed by 3 digits).
-	  To see if you may need this option, examine the white
-	  sticker on the underside of your device.
+
+	  This option enables support for the OnAir Creator USB tuner
+	  device.  This is a hybrid device, however currently only
+	  analog mode is supported.
 
 	  If you are in doubt, say Y.
 
-config VIDEO_PVRUSB2_24XXX
-	bool "Hauppauge WinTV-PVR USB2 support for 24xxx model series"
+config VIDEO_PVRUSB2_ONAIR_USB2
+	bool "pvrusb2 driver support for OnAir USB2 model"
 	depends on VIDEO_PVRUSB2 && EXPERIMENTAL
-	select VIDEO_CX25840
-	select VIDEO_WM8775
+	select VIDEO_SAA711X
+	select VIDEO_CS53L32A
 	---help---
-	  This option enables inclusion of additional logic to operate
-	  newer WinTV-PVR USB2 devices whose model number is of the
-	  form "24xxx" (leading prefix of "24" followed by 3 digits).
-	  To see if you may need this option, examine the white
-	  sticker on the underside of your device.  Enabling this
-	  option will not harm support for older devices, however it
-	  is a separate option because of the experimental nature of
-	  this new feature.
 
-	  If you are in doubt, say N.
+	  This option enables support for the OnAir USB2 tuner device
+	  (also known as the Sasem tuner).  This is a hybrid device,
+	  however currently only analog mode is supported.
 
-	  Note: This feature is _very_ experimental.  You have been
-	  warned.
+	  If you are in doubt, say Y.
 
 config VIDEO_PVRUSB2_SYSFS
 	bool "pvrusb2 sysfs support (EXPERIMENTAL)"
@@ -62,6 +58,23 @@ config VIDEO_PVRUSB2_SYSFS
 
 	  Note: This feature is experimental and subject to change.
 
+config VIDEO_PVRUSB2_DVB
+	bool "pvrusb2 DVB support (EXPERIMENTAL)"
+	default n
+	depends on VIDEO_PVRUSB2 && DVB_CORE && EXPERIMENTAL
+	---help---
+
+	  This option enables compilation of a DVB interface for the
+	  pvrusb2 driver.  Currently this is very very experimental.
+	  It is also limiting - the DVB interface can only access the
+	  side of hybrid devices, and there are going to be issues if
+	  you attempt to mess with the V4L side at the same time.
+	  Don't turn this on unless you know what you are doing.
+
+	  If you are in doubt, say N.
+
+	  Note: This feature is very experimental and might break
+
 config VIDEO_PVRUSB2_DEBUGIFC
 	bool "pvrusb2 debug interface"
 	depends on VIDEO_PVRUSB2_SYSFS