X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fide%2Fsetup-pci.c;h=b15cad58dc81ea781b4ac7b366759d6ab3de20e8;hb=5554b35933245e95710d709175e14c02cbc956a4;hp=634e3f6a96087907b8053fc8bcdb29d3b20281d0;hpb=4f02f8220562591322c118d07a32bebf705318b7;p=linux-2.6 diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 634e3f6a96..b15cad58dc 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -6,97 +6,15 @@ * May be copied or modified under the terms of the GNU General Public License */ -#include #include #include #include #include -#include -#include #include #include #include #include -#include - - -/** - * ide_match_hwif - match a PCI IDE against an ide_hwif - * @io_base: I/O base of device - * @bootable: set if its bootable - * @name: name of device - * - * Match a PCI IDE port against an entry in ide_hwifs[], - * based on io_base port if possible. Return the matching hwif, - * or a new hwif. If we find an error (clashing, out of devices, etc) - * return NULL - * - * FIXME: we need to handle mmio matches here too - */ - -static ide_hwif_t *ide_match_hwif(unsigned long io_base, u8 bootable, const char *name) -{ - int h; - ide_hwif_t *hwif; - - /* - * Look for a hwif with matching io_base specified using - * parameters to ide_setup(). - */ - for (h = 0; h < MAX_HWIFS; ++h) { - hwif = &ide_hwifs[h]; - if (hwif->io_ports[IDE_DATA_OFFSET] == io_base) { - if (hwif->chipset == ide_forced) - return hwif; /* a perfect match */ - } - } - /* - * Look for a hwif with matching io_base default value. - * If chipset is "ide_unknown", then claim that hwif slot. - * Otherwise, some other chipset has already claimed it.. :( - */ - for (h = 0; h < MAX_HWIFS; ++h) { - hwif = &ide_hwifs[h]; - if (hwif->io_ports[IDE_DATA_OFFSET] == io_base) { - if (hwif->chipset == ide_unknown) - return hwif; /* match */ - printk(KERN_ERR "%s: port 0x%04lx already claimed by %s\n", - name, io_base, hwif->name); - return NULL; /* already claimed */ - } - } - /* - * Okay, there is no hwif matching our io_base, - * so we'll just claim an unassigned slot. - * Give preference to claiming other slots before claiming ide0/ide1, - * just in case there's another interface yet-to-be-scanned - * which uses ports 1f0/170 (the ide0/ide1 defaults). - * - * Unless there is a bootable card that does not use the standard - * ports 1f0/170 (the ide0/ide1 defaults). The (bootable) flag. - */ - if (bootable) { - for (h = 0; h < MAX_HWIFS; ++h) { - hwif = &ide_hwifs[h]; - if (hwif->chipset == ide_unknown) - return hwif; /* pick an unused entry */ - } - } else { - for (h = 2; h < MAX_HWIFS; ++h) { - hwif = ide_hwifs + h; - if (hwif->chipset == ide_unknown) - return hwif; /* pick an unused entry */ - } - } - for (h = 0; h < 2 && h < MAX_HWIFS; ++h) { - hwif = ide_hwifs + h; - if (hwif->chipset == ide_unknown) - return hwif; /* pick an unused entry */ - } - printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", name); - return NULL; -} /** * ide_setup_pci_baseregs - place a PCI IDE controller native @@ -105,13 +23,13 @@ static ide_hwif_t *ide_match_hwif(unsigned long io_base, u8 bootable, const char * * We attempt to place the PCI interface into PCI native mode. If * we succeed the BARs are ok and the controller is in PCI mode. - * Returns 0 on success or an errno code. + * Returns 0 on success or an errno code. * * FIXME: if we program the interface and then fail to set the BARS * we don't switch it back to legacy mode. Do we actually care ?? */ - -static int ide_setup_pci_baseregs (struct pci_dev *dev, const char *name) + +static int ide_setup_pci_baseregs(struct pci_dev *dev, const char *name) { u8 progif = 0; @@ -150,22 +68,19 @@ static void ide_pci_clear_simplex(unsigned long dma_base, const char *name) } /** - * ide_get_or_set_dma_base - setup BMIBA - * @d: IDE port info + * ide_pci_dma_base - setup BMIBA * @hwif: IDE interface + * @d: IDE port info * * Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space. - * Where a device has a partner that is already in DMA mode we check - * and enforce IDE simplex rules. */ -static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_hwif_t *hwif) +unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long dma_base = 0; - u8 dma_stat = 0; - if (hwif->mmio) + if (hwif->host_flags & IDE_HFLAG_MMIO) return hwif->dma_base; if (hwif->mate && hwif->mate->dma_base) { @@ -184,11 +99,19 @@ static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_ if (hwif->channel) dma_base += 8; - if (d->host_flags & IDE_HFLAG_CS5520) + return dma_base; +} +EXPORT_SYMBOL_GPL(ide_pci_dma_base); + +int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d) +{ + u8 dma_stat; + + if (d->host_flags & (IDE_HFLAG_MMIO | IDE_HFLAG_CS5520)) goto out; if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) { - ide_pci_clear_simplex(dma_base, d->name); + ide_pci_clear_simplex(hwif->dma_base, d->name); goto out; } @@ -202,14 +125,39 @@ static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_ * we tune the drive then try to grab DMA ownership if we want to be * the DMA end. This has to be become dynamic to handle hot-plug. */ - dma_stat = hwif->INB(dma_base + 2); + dma_stat = hwif->tp_ops->read_sff_dma_status(hwif); if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) { printk(KERN_INFO "%s: simplex device: DMA disabled\n", d->name); - dma_base = 0; + return -1; } out: - return dma_base; + return 0; +} +EXPORT_SYMBOL_GPL(ide_pci_check_simplex); + +/* + * Set up BM-DMA capability (PnP BIOS should have done this) + */ +int ide_pci_set_master(struct pci_dev *dev, const char *name) +{ + u16 pcicmd; + + pci_read_config_word(dev, PCI_COMMAND, &pcicmd); + + if ((pcicmd & PCI_COMMAND_MASTER) == 0) { + pci_set_master(dev); + + if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) || + (pcicmd & PCI_COMMAND_MASTER) == 0) { + printk(KERN_ERR "%s: error updating PCICMD on %s\n", + name, pci_name(dev)); + return -EIO; + } + } + + return 0; } +EXPORT_SYMBOL_GPL(ide_pci_set_master); #endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d) @@ -218,7 +166,6 @@ void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d) " PCI slot %s\n", d->name, dev->vendor, dev->device, dev->revision, pci_name(dev)); } - EXPORT_SYMBOL_GPL(ide_setup_pci_noise); @@ -231,13 +178,13 @@ EXPORT_SYMBOL_GPL(ide_setup_pci_noise); * but if that fails then we only need IO space. The PCI code should * have setup the proper resources for us already for controllers in * legacy mode. - * + * * Returns zero on success or an error code */ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d) { - int ret; + int ret, bars; if (pci_enable_device(dev)) { ret = pci_enable_device_io(dev); @@ -260,13 +207,21 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d) goto out; } - /* FIXME: Temporary - until we put in the hotplug interface logic - Check that the bits we want are not in use by someone else. */ - ret = pci_request_region(dev, 4, "ide_tmp"); - if (ret < 0) - goto out; + if (d->host_flags & IDE_HFLAG_SINGLE) + bars = (1 << 2) - 1; + else + bars = (1 << 4) - 1; + + if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) { + if (d->host_flags & IDE_HFLAG_CS5520) + bars |= (1 << 2); + else + bars |= (1 << 4); + } - pci_release_region(dev, 4); + ret = pci_request_selected_regions(dev, bars, d->name); + if (ret < 0) + printk(KERN_ERR "%s: can't reserve resources\n", d->name); out: return ret; } @@ -290,8 +245,8 @@ static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d) * Maybe the user deliberately *disabled* the device, * but we'll eventually ignore it again if no drives respond. */ - if (ide_setup_pci_baseregs(dev, d->name) || pci_write_config_word(dev, PCI_COMMAND, pcicmd|PCI_COMMAND_IO)) - { + if (ide_setup_pci_baseregs(dev, d->name) || + pci_write_config_word(dev, PCI_COMMAND, pcicmd | PCI_COMMAND_IO)) { printk(KERN_INFO "%s: device disabled (BIOS)\n", d->name); return -ENODEV; } @@ -312,93 +267,76 @@ static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d) * @d: IDE port info * @bar: BAR number * - * Checks if a BAR is configured and points to MMIO space. If so - * print an error and return an error code. Otherwise return 0 + * Checks if a BAR is configured and points to MMIO space. If so, + * return an error code. Otherwise return 0 */ -static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *d, int bar) +static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *d, + int bar) { ulong flags = pci_resource_flags(dev, bar); - + /* Unconfigured ? */ if (!flags || pci_resource_len(dev, bar) == 0) return 0; - /* I/O space */ - if(flags & PCI_BASE_ADDRESS_IO_MASK) + /* I/O space */ + if (flags & IORESOURCE_IO) return 0; - + /* Bad */ - printk(KERN_ERR "%s: IO baseregs (BIOS) are reported " - "as MEM, report to " - ".\n", d->name); return -EINVAL; } /** - * ide_hwif_configure - configure an IDE interface + * ide_hw_configure - configure a hw_regs_t instance * @dev: PCI device holding interface * @d: IDE port info * @port: port number * @irq: PCI IRQ + * @hw: hw_regs_t instance corresponding to this port * * Perform the initial set up for the hardware interface structure. This * is done per interface port rather than per PCI device. There may be * more than one port per device. * - * Returns the new hardware interface structure, or NULL on a failure + * Returns zero on success or an error code. */ -static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, - const struct ide_port_info *d, - unsigned int port, int irq) +static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d, + unsigned int port, int irq, hw_regs_t *hw) { unsigned long ctl = 0, base = 0; - ide_hwif_t *hwif; - u8 bootable = (d->host_flags & IDE_HFLAG_BOOTABLE) ? 1 : 0; - u8 oldnoprobe = 0; - struct hw_regs_s hw; if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) { - /* Possibly we should fail if these checks report true */ - ide_pci_check_iomem(dev, d, 2*port); - ide_pci_check_iomem(dev, d, 2*port+1); - + if (ide_pci_check_iomem(dev, d, 2 * port) || + ide_pci_check_iomem(dev, d, 2 * port + 1)) { + printk(KERN_ERR "%s: I/O baseregs (BIOS) are reported " + "as MEM for port %d!\n", d->name, port); + return -EINVAL; + } + ctl = pci_resource_start(dev, 2*port+1); base = pci_resource_start(dev, 2*port); - if ((ctl && !base) || (base && !ctl)) { - printk(KERN_ERR "%s: inconsistent baseregs (BIOS) " - "for port %d, skipping\n", d->name, port); - return NULL; - } - } - if (!ctl) - { + } else { /* Use default values */ ctl = port ? 0x374 : 0x3f4; base = port ? 0x170 : 0x1f0; } - if ((hwif = ide_match_hwif(base, bootable, d->name)) == NULL) - return NULL; /* no room in ide_hwifs[] */ - - memset(&hw, 0, sizeof(hw)); - hw.irq = hwif->irq ? hwif->irq : irq; - hw.dev = &dev->dev; - hw.chipset = d->chipset ? d->chipset : ide_pci; - ide_std_init_ports(&hw, base, ctl | 2); - - if (hwif->io_ports[IDE_DATA_OFFSET] == base && - hwif->io_ports[IDE_CONTROL_OFFSET] == (ctl | 2)) - oldnoprobe = hwif->noprobe; - ide_init_port_hw(hwif, &hw); - - hwif->noprobe = oldnoprobe; + if (!base || !ctl) { + printk(KERN_ERR "%s: bad PCI BARs for port %d, skipping\n", + d->name, port); + return -EINVAL; + } - hwif->dev = &dev->dev; - hwif->cds = d; + memset(hw, 0, sizeof(*hw)); + hw->irq = irq; + hw->dev = &dev->dev; + hw->chipset = d->chipset ? d->chipset : ide_pci; + ide_std_init_ports(hw, base, ctl | 2); - return hwif; + return 0; } #ifdef CONFIG_BLK_DEV_IDEDMA_PCI @@ -412,40 +350,41 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, * state */ -void ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d) +int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); - u16 pcicmd; - - pci_read_config_word(dev, PCI_COMMAND, &pcicmd); if ((d->host_flags & IDE_HFLAG_NO_AUTODMA) == 0 || ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 0x80))) { - unsigned long dma_base = ide_get_or_set_dma_base(d, hwif); - if (dma_base && !(pcicmd & PCI_COMMAND_MASTER)) { - /* - * Set up BM-DMA capability - * (PnP BIOS should have done this) - */ - pci_set_master(dev); - if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) || !(pcicmd & PCI_COMMAND_MASTER)) { - printk(KERN_ERR "%s: %s error updating PCICMD\n", - hwif->name, d->name); - dma_base = 0; - } - } - if (dma_base) { - if (d->init_dma) { - d->init_dma(hwif, dma_base); - } else { - ide_setup_dma(hwif, dma_base); - } - } else { - printk(KERN_INFO "%s: %s Bus-Master DMA disabled " - "(BIOS)\n", hwif->name, d->name); - } + unsigned long base = ide_pci_dma_base(hwif, d); + + if (base == 0) + return -1; + + hwif->dma_base = base; + + if (ide_pci_check_simplex(hwif, d) < 0) + return -1; + + if (ide_pci_set_master(dev, d->name) < 0) + return -1; + + if (hwif->host_flags & IDE_HFLAG_MMIO) + printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name); + else + printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", + hwif->name, base, base + 7); + + hwif->extra_base = base + (hwif->channel ? 8 : 16); + + if (ide_allocate_dma_engine(hwif)) + return -1; + + hwif->dma_ops = &sff_dma_ops; } + + return 0; } #endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ @@ -495,7 +434,8 @@ out: * @dev: PCI device * @d: IDE port info * @pciirq: IRQ line - * @idx: ATA index table to update + * @hw: hw_regs_t instances corresponding to this PCI IDE device + * @hws: hw_regs_t pointers table to update * * Scan the interfaces attached to this device and do any * necessary per port setup. Attach the devices and ask the @@ -506,10 +446,10 @@ out: * where the chipset setup is not the default PCI IDE one. */ -void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int pciirq, u8 *idx) +void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, + int pciirq, hw_regs_t *hw, hw_regs_t **hws) { int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port; - ide_hwif_t *hwif; u8 tmp; /* @@ -525,14 +465,12 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int continue; /* port not enabled */ } - hwif = ide_hwif_configure(dev, d, port, pciirq); - if (hwif == NULL) + if (ide_hw_configure(dev, d, port, pciirq, hw + port)) continue; - *(idx + port) = hwif->index; + *(hws + port) = hw + port; } } - EXPORT_SYMBOL_GPL(ide_pci_setup_ports); /* @@ -547,7 +485,7 @@ EXPORT_SYMBOL_GPL(ide_pci_setup_ports); */ static int do_ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d, - u8 *idx, u8 noisy) + u8 noisy) { int tried_config = 0; int pciirq, ret; @@ -596,26 +534,27 @@ static int do_ide_setup_pci_device(struct pci_dev *dev, d->name, pciirq); } - /* FIXME: silent failure can happen */ - - ide_pci_setup_ports(dev, d, pciirq, idx); + ret = pciirq; out: return ret; } int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d) { - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL }; int ret; - ret = do_ide_setup_pci_device(dev, d, &idx[0], 1); + ret = do_ide_setup_pci_device(dev, d, 1); - if (ret >= 0) - ide_device_add(idx, d); + if (ret >= 0) { + /* FIXME: silent failure can happen */ + ide_pci_setup_ports(dev, d, ret, &hw[0], &hws[0]); + + ret = ide_host_add(d, hws, NULL); + } return ret; } - EXPORT_SYMBOL_GPL(ide_setup_pci_device); int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2, @@ -623,21 +562,24 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2, { struct pci_dev *pdev[] = { dev1, dev2 }; int ret, i; - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL }; for (i = 0; i < 2; i++) { - ret = do_ide_setup_pci_device(pdev[i], d, &idx[i*2], !i); + ret = do_ide_setup_pci_device(pdev[i], d, !i); + /* * FIXME: Mom, mom, they stole me the helper function to undo * do_ide_setup_pci_device() on the first device! */ if (ret < 0) goto out; + + /* FIXME: silent failure can happen */ + ide_pci_setup_ports(pdev[i], d, ret, &hw[i*2], &hws[i*2]); } - ide_device_add(idx, d); + ret = ide_host_add(d, hws, NULL); out: return ret; } - EXPORT_SYMBOL_GPL(ide_setup_pci_devices);