X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fide%2Fsetup-pci.c;h=a8e9e8a69a525a2b3f162b32348c44577ad83125;hb=b6c63937001889af6fe431aaba97e59d04e028e7;hp=804c3ef245f9289167cf31d8b39999768f65428b;hpb=374e042c3e767ac2e5a40b78529220e0b3de793c;p=linux-2.6 diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 804c3ef245..a8e9e8a69a 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -39,17 +39,18 @@ static int ide_setup_pci_baseregs(struct pci_dev *dev, const char *name) if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) || (progif & 5) != 5) { if ((progif & 0xa) != 0xa) { - printk(KERN_INFO "%s: device not capable of full " - "native PCI mode\n", name); + printk(KERN_INFO "%s %s: device not capable of full " + "native PCI mode\n", name, pci_name(dev)); return -EOPNOTSUPP; } - printk("%s: placing both ports into native PCI mode\n", name); + printk(KERN_INFO "%s %s: placing both ports into native PCI " + "mode\n", name, pci_name(dev)); (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5); if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) || (progif & 5) != 5) { - printk(KERN_ERR "%s: rewrite of PROGIF failed, wanted " - "0x%04x, got 0x%04x\n", - name, progif|5, progif); + printk(KERN_ERR "%s %s: rewrite of PROGIF failed, " + "wanted 0x%04x, got 0x%04x\n", + name, pci_name(dev), progif | 5, progif); return -EOPNOTSUPP; } } @@ -57,14 +58,14 @@ static int ide_setup_pci_baseregs(struct pci_dev *dev, const char *name) } #ifdef CONFIG_BLK_DEV_IDEDMA_PCI -static void ide_pci_clear_simplex(unsigned long dma_base, const char *name) +static int ide_pci_clear_simplex(unsigned long dma_base, const char *name) { u8 dma_stat = inb(dma_base + 2); outb(dma_stat & 0x60, dma_base + 2); dma_stat = inb(dma_base + 2); - if (dma_stat & 0x80) - printk(KERN_INFO "%s: simplex device: DMA forced\n", name); + + return (dma_stat & 0x80) ? 1 : 0; } /** @@ -91,7 +92,8 @@ unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d) dma_base = pci_resource_start(dev, baridx); if (dma_base == 0) { - printk(KERN_ERR "%s: DMA base is invalid\n", d->name); + printk(KERN_ERR "%s %s: DMA base is invalid\n", + d->name, pci_name(dev)); return 0; } } @@ -105,13 +107,16 @@ EXPORT_SYMBOL_GPL(ide_pci_dma_base); int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d) { + struct pci_dev *dev = to_pci_dev(hwif->dev); u8 dma_stat; if (d->host_flags & (IDE_HFLAG_MMIO | IDE_HFLAG_CS5520)) goto out; if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) { - ide_pci_clear_simplex(hwif->dma_base, d->name); + if (ide_pci_clear_simplex(hwif->dma_base, d->name)) + printk(KERN_INFO "%s %s: simplex device: DMA forced\n", + d->name, pci_name(dev)); goto out; } @@ -127,7 +132,8 @@ int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d) */ dma_stat = hwif->tp_ops->read_sff_dma_status(hwif); if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) { - printk(KERN_INFO "%s: simplex device: DMA disabled\n", d->name); + printk(KERN_INFO "%s %s: simplex device: DMA disabled\n", + d->name, pci_name(dev)); return -1; } out: @@ -149,8 +155,8 @@ int ide_pci_set_master(struct pci_dev *dev, const char *name) if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) || (pcicmd & PCI_COMMAND_MASTER) == 0) { - printk(KERN_ERR "%s: error updating PCICMD on %s\n", - name, pci_name(dev)); + printk(KERN_ERR "%s %s: error updating PCICMD\n", + name, pci_name(dev)); return -EIO; } } @@ -162,9 +168,9 @@ EXPORT_SYMBOL_GPL(ide_pci_set_master); void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d) { - printk(KERN_INFO "%s: IDE controller (0x%04x:0x%04x rev 0x%02x) at " - " PCI slot %s\n", d->name, dev->vendor, dev->device, - dev->revision, pci_name(dev)); + printk(KERN_INFO "%s %s: IDE controller (0x%04x:0x%04x rev 0x%02x)\n", + d->name, pci_name(dev), + dev->vendor, dev->device, dev->revision); } EXPORT_SYMBOL_GPL(ide_setup_pci_noise); @@ -189,11 +195,12 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d) if (pci_enable_device(dev)) { ret = pci_enable_device_io(dev); if (ret < 0) { - printk(KERN_WARNING "%s: (ide_setup_pci_device:) " - "Could not enable device.\n", d->name); + printk(KERN_WARNING "%s %s: couldn't enable device\n", + d->name, pci_name(dev)); goto out; } - printk(KERN_WARNING "%s: BIOS configuration fixed.\n", d->name); + printk(KERN_WARNING "%s %s: BIOS configuration fixed\n", + d->name, pci_name(dev)); } /* @@ -203,7 +210,8 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d) */ ret = pci_set_dma_mask(dev, DMA_32BIT_MASK); if (ret < 0) { - printk(KERN_ERR "%s: can't set dma mask\n", d->name); + printk(KERN_ERR "%s %s: can't set DMA mask\n", + d->name, pci_name(dev)); goto out; } @@ -221,7 +229,8 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d) ret = pci_request_selected_regions(dev, bars, d->name); if (ret < 0) - printk(KERN_ERR "%s: can't reserve resources\n", d->name); + printk(KERN_ERR "%s %s: can't reserve resources\n", + d->name, pci_name(dev)); out: return ret; } @@ -247,15 +256,18 @@ static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d) */ if (ide_setup_pci_baseregs(dev, d->name) || pci_write_config_word(dev, PCI_COMMAND, pcicmd | PCI_COMMAND_IO)) { - printk(KERN_INFO "%s: device disabled (BIOS)\n", d->name); + printk(KERN_INFO "%s %s: device disabled (BIOS)\n", + d->name, pci_name(dev)); return -ENODEV; } if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd)) { - printk(KERN_ERR "%s: error accessing PCI regs\n", d->name); + printk(KERN_ERR "%s %s: error accessing PCI regs\n", + d->name, pci_name(dev)); return -EIO; } if (!(pcicmd & PCI_COMMAND_IO)) { - printk(KERN_ERR "%s: unable to enable IDE controller\n", d->name); + printk(KERN_ERR "%s %s: unable to enable IDE controller\n", + d->name, pci_name(dev)); return -ENXIO; } return 0; @@ -289,7 +301,7 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info * } /** - * ide_hwif_configure - configure an IDE interface + * ide_hw_configure - configure a hw_regs_t instance * @dev: PCI device holding interface * @d: IDE port info * @port: port number @@ -300,23 +312,21 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info * * is done per interface port rather than per PCI device. There may be * more than one port per device. * - * Returns the new hardware interface structure, or NULL on a failure + * Returns zero on success or an error code. */ -static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, - const struct ide_port_info *d, - unsigned int port, int irq, - hw_regs_t *hw) +static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d, + unsigned int port, int irq, hw_regs_t *hw) { unsigned long ctl = 0, base = 0; - ide_hwif_t *hwif; if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) { if (ide_pci_check_iomem(dev, d, 2 * port) || ide_pci_check_iomem(dev, d, 2 * port + 1)) { - printk(KERN_ERR "%s: I/O baseregs (BIOS) are reported " - "as MEM for port %d!\n", d->name, port); - return NULL; + printk(KERN_ERR "%s %s: I/O baseregs (BIOS) are " + "reported as MEM for port %d!\n", + d->name, pci_name(dev), port); + return -EINVAL; } ctl = pci_resource_start(dev, 2*port+1); @@ -328,9 +338,9 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, } if (!base || !ctl) { - printk(KERN_ERR "%s: bad PCI BARs for port %d, skipping\n", - d->name, port); - return NULL; + printk(KERN_ERR "%s %s: bad PCI BARs for port %d, skipping\n", + d->name, pci_name(dev), port); + return -EINVAL; } memset(hw, 0, sizeof(*hw)); @@ -339,13 +349,7 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, hw->chipset = d->chipset ? d->chipset : ide_pci; ide_std_init_ports(hw, base, ctl | 2); - hwif = ide_find_port_slot(d); - if (hwif == NULL) - return NULL; - - hwif->chipset = hw->chipset; - - return hwif; + return 0; } #ifdef CONFIG_BLK_DEV_IDEDMA_PCI @@ -402,14 +406,14 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d) * @dev: PCI device * @d: IDE port info * @noisy: verbose flag - * @config: returned as 1 if we configured the hardware * * Set up the PCI and controller side of the IDE interface. This brings * up the PCI side of the device, checks that the device is enabled * and enables it if need be */ -static int ide_setup_pci_controller(struct pci_dev *dev, const struct ide_port_info *d, int noisy, int *config) +static int ide_setup_pci_controller(struct pci_dev *dev, + const struct ide_port_info *d, int noisy) { int ret; u16 pcicmd; @@ -423,15 +427,16 @@ static int ide_setup_pci_controller(struct pci_dev *dev, const struct ide_port_i ret = pci_read_config_word(dev, PCI_COMMAND, &pcicmd); if (ret < 0) { - printk(KERN_ERR "%s: error accessing PCI regs\n", d->name); + printk(KERN_ERR "%s %s: error accessing PCI regs\n", + d->name, pci_name(dev)); goto out; } if (!(pcicmd & PCI_COMMAND_IO)) { /* is device disabled? */ ret = ide_pci_configure(dev, d); if (ret < 0) goto out; - *config = 1; - printk(KERN_INFO "%s: device enabled (Linux)\n", d->name); + printk(KERN_INFO "%s %s: device enabled (Linux)\n", + d->name, pci_name(dev)); } out: @@ -443,7 +448,6 @@ out: * @dev: PCI device * @d: IDE port info * @pciirq: IRQ line - * @idx: ATA index table to update * @hw: hw_regs_t instances corresponding to this PCI IDE device * @hws: hw_regs_t pointers table to update * @@ -457,10 +461,9 @@ out: */ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, - int pciirq, u8 *idx, hw_regs_t *hw, hw_regs_t **hws) + int pciirq, hw_regs_t *hw, hw_regs_t **hws) { int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port; - ide_hwif_t *hwif; u8 tmp; /* @@ -472,16 +475,15 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) || (tmp & e->mask) != e->val)) { - printk(KERN_INFO "%s: IDE port disabled\n", d->name); + printk(KERN_INFO "%s %s: IDE port disabled\n", + d->name, pci_name(dev)); continue; /* port not enabled */ } - hwif = ide_hwif_configure(dev, d, port, pciirq, hw + port); - if (hwif == NULL) + if (ide_hw_configure(dev, d, port, pciirq, hw + port)) continue; *(hws + port) = hw + port; - *(idx + port) = hwif->index; } } EXPORT_SYMBOL_GPL(ide_pci_setup_ports); @@ -500,51 +502,35 @@ static int do_ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d, u8 noisy) { - int tried_config = 0; int pciirq, ret; - ret = ide_setup_pci_controller(dev, d, noisy, &tried_config); - if (ret < 0) - goto out; - /* * Can we trust the reported IRQ? */ pciirq = dev->irq; + /* + * This allows offboard ide-pci cards the enable a BIOS, + * verify interrupt settings of split-mirror pci-config + * space, place chipset into init-mode, and/or preserve + * an interrupt if the card is not native ide support. + */ + ret = d->init_chipset ? d->init_chipset(dev) : 0; + if (ret < 0) + goto out; + /* Is it an "IDE storage" device in non-PCI mode? */ if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5) { if (noisy) - printk(KERN_INFO "%s: not 100%% native mode: " - "will probe irqs later\n", d->name); - /* - * This allows offboard ide-pci cards the enable a BIOS, - * verify interrupt settings of split-mirror pci-config - * space, place chipset into init-mode, and/or preserve - * an interrupt if the card is not native ide support. - */ - ret = d->init_chipset ? d->init_chipset(dev, d->name) : 0; - if (ret < 0) - goto out; + printk(KERN_INFO "%s %s: not 100%% native mode: will " + "probe irqs later\n", d->name, pci_name(dev)); pciirq = ret; - } else if (tried_config) { - if (noisy) - printk(KERN_INFO "%s: will probe irqs later\n", d->name); - pciirq = 0; - } else if (!pciirq) { - if (noisy) - printk(KERN_WARNING "%s: bad irq (%d): will probe later\n", - d->name, pciirq); - pciirq = 0; - } else { - if (d->init_chipset) { - ret = d->init_chipset(dev, d->name); - if (ret < 0) - goto out; - } - if (noisy) - printk(KERN_INFO "%s: 100%% native mode on irq %d\n", - d->name, pciirq); + } else if (!pciirq && noisy) { + printk(KERN_WARNING "%s %s: bad irq (%d): will probe later\n", + d->name, pci_name(dev), pciirq); + } else if (noisy) { + printk(KERN_INFO "%s %s: 100%% native mode on irq %d\n", + d->name, pci_name(dev), pciirq); } ret = pciirq; @@ -552,32 +538,75 @@ out: return ret; } -int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d) +int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d, + void *priv) { - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + struct ide_host *host; hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL }; int ret; - ret = do_ide_setup_pci_device(dev, d, 1); + ret = ide_setup_pci_controller(dev, d, 1); + if (ret < 0) + goto out; - if (ret >= 0) { - /* FIXME: silent failure can happen */ - ide_pci_setup_ports(dev, d, ret, &idx[0], &hw[0], &hws[0]); + ide_pci_setup_ports(dev, d, 0, &hw[0], &hws[0]); - ide_device_add(idx, d, hws); + host = ide_host_alloc(d, hws); + if (host == NULL) { + ret = -ENOMEM; + goto out; } + host->dev[0] = &dev->dev; + + host->host_priv = priv; + + pci_set_drvdata(dev, host); + + ret = do_ide_setup_pci_device(dev, d, 1); + if (ret < 0) + goto out; + + /* fixup IRQ */ + hw[1].irq = hw[0].irq = ret; + + ret = ide_host_register(host, d, hws); + if (ret) + ide_host_free(host); +out: return ret; } -EXPORT_SYMBOL_GPL(ide_setup_pci_device); +EXPORT_SYMBOL_GPL(ide_pci_init_one); -int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2, - const struct ide_port_info *d) +int ide_pci_init_two(struct pci_dev *dev1, struct pci_dev *dev2, + const struct ide_port_info *d, void *priv) { struct pci_dev *pdev[] = { dev1, dev2 }; + struct ide_host *host; int ret, i; hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL }; - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + + for (i = 0; i < 2; i++) { + ret = ide_setup_pci_controller(pdev[i], d, !i); + if (ret < 0) + goto out; + + ide_pci_setup_ports(pdev[i], d, 0, &hw[i*2], &hws[i*2]); + } + + host = ide_host_alloc(d, hws); + if (host == NULL) { + ret = -ENOMEM; + goto out; + } + + host->dev[0] = &dev1->dev; + host->dev[1] = &dev2->dev; + + host->host_priv = priv; + + pci_set_drvdata(pdev[0], host); + pci_set_drvdata(pdev[1], host); for (i = 0; i < 2; i++) { ret = do_ide_setup_pci_device(pdev[i], d, !i); @@ -589,13 +618,44 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2, if (ret < 0) goto out; - /* FIXME: silent failure can happen */ - ide_pci_setup_ports(pdev[i], d, ret, &idx[i*2], &hw[i*2], - &hws[i*2]); + /* fixup IRQ */ + hw[i*2 + 1].irq = hw[i*2].irq = ret; } - ide_device_add(idx, d, hws); + ret = ide_host_register(host, d, hws); + if (ret) + ide_host_free(host); out: return ret; } -EXPORT_SYMBOL_GPL(ide_setup_pci_devices); +EXPORT_SYMBOL_GPL(ide_pci_init_two); + +void ide_pci_remove(struct pci_dev *dev) +{ + struct ide_host *host = pci_get_drvdata(dev); + struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL; + int bars; + + if (host->host_flags & IDE_HFLAG_SINGLE) + bars = (1 << 2) - 1; + else + bars = (1 << 4) - 1; + + if ((host->host_flags & IDE_HFLAG_NO_DMA) == 0) { + if (host->host_flags & IDE_HFLAG_CS5520) + bars |= (1 << 2); + else + bars |= (1 << 4); + } + + ide_host_remove(host); + + if (dev2) + pci_release_selected_regions(dev2, bars); + pci_release_selected_regions(dev, bars); + + if (dev2) + pci_disable_device(dev2); + pci_disable_device(dev); +} +EXPORT_SYMBOL_GPL(ide_pci_remove);