X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fide%2Fsetup-pci.c;h=6302010fd8e232ab17ad71d56f2c4e615aebc9da;hb=eb716beb0aeb4b14489a64c51c63e6a4be2e13a0;hp=63ef8aaa7b907f699f4babea104a6d425d0c8523;hpb=ade2daf9c6e57845fe83a24e0a9fa1c03c6e91b1;p=linux-2.6 diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 63ef8aaa7b..6302010fd8 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -1,9 +1,8 @@ /* - * linux/drivers/ide/setup-pci.c Version 1.10 2002/08/19 + * Copyright (C) 1998-2000 Andre Hedrick + * Copyright (C) 1995-1998 Mark Lord + * Copyright (C) 2007 Bartlomiej Zolnierkiewicz * - * Copyright (c) 1998-2000 Andre Hedrick - * - * Copyright (c) 1995-1998 Mark Lord * May be copied or modified under the terms of the GNU General Public License */ @@ -21,84 +20,6 @@ #include #include - -/** - * ide_match_hwif - match a PCI IDE against an ide_hwif - * @io_base: I/O base of device - * @bootable: set if its bootable - * @name: name of device - * - * Match a PCI IDE port against an entry in ide_hwifs[], - * based on io_base port if possible. Return the matching hwif, - * or a new hwif. If we find an error (clashing, out of devices, etc) - * return NULL - * - * FIXME: we need to handle mmio matches here too - */ - -static ide_hwif_t *ide_match_hwif(unsigned long io_base, u8 bootable, const char *name) -{ - int h; - ide_hwif_t *hwif; - - /* - * Look for a hwif with matching io_base specified using - * parameters to ide_setup(). - */ - for (h = 0; h < MAX_HWIFS; ++h) { - hwif = &ide_hwifs[h]; - if (hwif->io_ports[IDE_DATA_OFFSET] == io_base) { - if (hwif->chipset == ide_forced) - return hwif; /* a perfect match */ - } - } - /* - * Look for a hwif with matching io_base default value. - * If chipset is "ide_unknown", then claim that hwif slot. - * Otherwise, some other chipset has already claimed it.. :( - */ - for (h = 0; h < MAX_HWIFS; ++h) { - hwif = &ide_hwifs[h]; - if (hwif->io_ports[IDE_DATA_OFFSET] == io_base) { - if (hwif->chipset == ide_unknown) - return hwif; /* match */ - printk(KERN_ERR "%s: port 0x%04lx already claimed by %s\n", - name, io_base, hwif->name); - return NULL; /* already claimed */ - } - } - /* - * Okay, there is no hwif matching our io_base, - * so we'll just claim an unassigned slot. - * Give preference to claiming other slots before claiming ide0/ide1, - * just in case there's another interface yet-to-be-scanned - * which uses ports 1f0/170 (the ide0/ide1 defaults). - * - * Unless there is a bootable card that does not use the standard - * ports 1f0/170 (the ide0/ide1 defaults). The (bootable) flag. - */ - if (bootable) { - for (h = 0; h < MAX_HWIFS; ++h) { - hwif = &ide_hwifs[h]; - if (hwif->chipset == ide_unknown) - return hwif; /* pick an unused entry */ - } - } else { - for (h = 2; h < MAX_HWIFS; ++h) { - hwif = ide_hwifs + h; - if (hwif->chipset == ide_unknown) - return hwif; /* pick an unused entry */ - } - } - for (h = 0; h < 2 && h < MAX_HWIFS; ++h) { - hwif = ide_hwifs + h; - if (hwif->chipset == ide_unknown) - return hwif; /* pick an unused entry */ - } - printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", name); - return NULL; -} - /** * ide_setup_pci_baseregs - place a PCI IDE controller native * @dev: PCI device of interface to switch native @@ -106,13 +27,13 @@ static ide_hwif_t *ide_match_hwif(unsigned long io_base, u8 bootable, const char * * We attempt to place the PCI interface into PCI native mode. If * we succeed the BARs are ok and the controller is in PCI mode. - * Returns 0 on success or an errno code. + * Returns 0 on success or an errno code. * * FIXME: if we program the interface and then fail to set the BARS * we don't switch it back to legacy mode. Do we actually care ?? */ - -static int ide_setup_pci_baseregs (struct pci_dev *dev, const char *name) + +static int ide_setup_pci_baseregs(struct pci_dev *dev, const char *name) { u8 progif = 0; @@ -140,6 +61,16 @@ static int ide_setup_pci_baseregs (struct pci_dev *dev, const char *name) } #ifdef CONFIG_BLK_DEV_IDEDMA_PCI +static void ide_pci_clear_simplex(unsigned long dma_base, const char *name) +{ + u8 dma_stat = inb(dma_base + 2); + + outb(dma_stat & 0x60, dma_base + 2); + dma_stat = inb(dma_base + 2); + if (dma_stat & 0x80) + printk(KERN_INFO "%s: simplex device: DMA forced\n", name); +} + /** * ide_get_or_set_dma_base - setup BMIBA * @d: IDE port info @@ -152,8 +83,9 @@ static int ide_setup_pci_baseregs (struct pci_dev *dev, const char *name) static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_hwif_t *hwif) { - unsigned long dma_base = 0; - struct pci_dev *dev = hwif->pci_dev; + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long dma_base = 0; + u8 dma_stat = 0; if (hwif->mmio) return hwif->dma_base; @@ -174,52 +106,30 @@ static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_ if (hwif->channel) dma_base += 8; - if ((d->host_flags & IDE_HFLAG_CS5520) == 0) { - u8 simplex_stat = 0; - - switch(dev->device) { - case PCI_DEVICE_ID_AL_M5219: - case PCI_DEVICE_ID_AL_M5229: - case PCI_DEVICE_ID_AMD_VIPER_7409: - case PCI_DEVICE_ID_CMD_643: - case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE: - case PCI_DEVICE_ID_REVOLUTION: - simplex_stat = inb(dma_base + 2); - outb(simplex_stat & 0x60, dma_base + 2); - simplex_stat = inb(dma_base + 2); - if (simplex_stat & 0x80) { - printk(KERN_INFO "%s: simplex device: " - "DMA forced\n", - d->name); - } - break; - default: - /* - * If the device claims "simplex" DMA, - * this means only one of the two interfaces - * can be trusted with DMA at any point in time. - * So we should enable DMA only on one of the - * two interfaces. - */ - simplex_stat = hwif->INB(dma_base + 2); - if (simplex_stat & 0x80) { - /* simplex device? */ -/* - * At this point we haven't probed the drives so we can't make the - * appropriate decision. Really we should defer this problem - * until we tune the drive then try to grab DMA ownership if we want - * to be the DMA end. This has to be become dynamic to handle hot - * plug. - */ - if (hwif->mate && hwif->mate->dma_base) { - printk(KERN_INFO "%s: simplex device: " - "DMA disabled\n", - d->name); - dma_base = 0; - } - } - } + if (d->host_flags & IDE_HFLAG_CS5520) + goto out; + + if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) { + ide_pci_clear_simplex(dma_base, d->name); + goto out; } + + /* + * If the device claims "simplex" DMA, this means that only one of + * the two interfaces can be trusted with DMA at any point in time + * (so we should enable DMA only on one of the two interfaces). + * + * FIXME: At this point we haven't probed the drives so we can't make + * the appropriate decision. Really we should defer this problem until + * we tune the drive then try to grab DMA ownership if we want to be + * the DMA end. This has to be become dynamic to handle hot-plug. + */ + dma_stat = hwif->INB(dma_base + 2); + if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) { + printk(KERN_INFO "%s: simplex device: DMA disabled\n", d->name); + dma_base = 0; + } +out: return dma_base; } #endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ @@ -230,7 +140,6 @@ void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d) " PCI slot %s\n", d->name, dev->vendor, dev->device, dev->revision, pci_name(dev)); } - EXPORT_SYMBOL_GPL(ide_setup_pci_noise); @@ -240,8 +149,10 @@ EXPORT_SYMBOL_GPL(ide_setup_pci_noise); * @d: IDE port info * * Enable the IDE PCI device. We attempt to enable the device in full - * but if that fails then we only need BAR4 so we will enable that. - * + * but if that fails then we only need IO space. The PCI code should + * have setup the proper resources for us already for controllers in + * legacy mode. + * * Returns zero on success or an error code */ @@ -250,7 +161,7 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d) int ret; if (pci_enable_device(dev)) { - ret = pci_enable_device_bars(dev, 1 << 4); + ret = pci_enable_device_io(dev); if (ret < 0) { printk(KERN_WARNING "%s: (ide_setup_pci_device:) " "Could not enable device.\n", d->name); @@ -300,8 +211,8 @@ static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d) * Maybe the user deliberately *disabled* the device, * but we'll eventually ignore it again if no drives respond. */ - if (ide_setup_pci_baseregs(dev, d->name) || pci_write_config_word(dev, PCI_COMMAND, pcicmd|PCI_COMMAND_IO)) - { + if (ide_setup_pci_baseregs(dev, d->name) || + pci_write_config_word(dev, PCI_COMMAND, pcicmd | PCI_COMMAND_IO)) { printk(KERN_INFO "%s: device disabled (BIOS)\n", d->name); return -ENODEV; } @@ -322,26 +233,24 @@ static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d) * @d: IDE port info * @bar: BAR number * - * Checks if a BAR is configured and points to MMIO space. If so - * print an error and return an error code. Otherwise return 0 + * Checks if a BAR is configured and points to MMIO space. If so, + * return an error code. Otherwise return 0 */ -static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *d, int bar) +static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *d, + int bar) { ulong flags = pci_resource_flags(dev, bar); - + /* Unconfigured ? */ if (!flags || pci_resource_len(dev, bar) == 0) return 0; - /* I/O space */ - if(flags & PCI_BASE_ADDRESS_IO_MASK) + /* I/O space */ + if (flags & IORESOURCE_IO) return 0; - + /* Bad */ - printk(KERN_ERR "%s: IO baseregs (BIOS) are reported " - "as MEM, report to " - ".\n", d->name); return -EINVAL; } @@ -349,7 +258,8 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info * * ide_hwif_configure - configure an IDE interface * @dev: PCI device holding interface * @d: IDE port info - * @mate: Paired interface if any + * @port: port number + * @irq: PCI IRQ * * Perform the initial set up for the hardware interface structure. This * is done per interface port rather than per PCI device. There may be @@ -358,17 +268,22 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info * * Returns the new hardware interface structure, or NULL on a failure */ -static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, const struct ide_port_info *d, ide_hwif_t *mate, int port, int irq) +static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, + const struct ide_port_info *d, + unsigned int port, int irq) { unsigned long ctl = 0, base = 0; ide_hwif_t *hwif; - u8 bootable = (d->host_flags & IDE_HFLAG_BOOTABLE) ? 1 : 0; + struct hw_regs_s hw; if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) { - /* Possibly we should fail if these checks report true */ - ide_pci_check_iomem(dev, d, 2*port); - ide_pci_check_iomem(dev, d, 2*port+1); - + if (ide_pci_check_iomem(dev, d, 2 * port) || + ide_pci_check_iomem(dev, d, 2 * port + 1)) { + printk(KERN_ERR "%s: I/O baseregs (BIOS) are reported " + "as MEM for port %d!\n", d->name, port); + return NULL; + } + ctl = pci_resource_start(dev, 2*port+1); base = pci_resource_start(dev, 2*port); if ((ctl && !base) || (base && !ctl)) { @@ -377,55 +292,47 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, const struct ide_port return NULL; } } - if (!ctl) - { + if (!ctl) { /* Use default values */ ctl = port ? 0x374 : 0x3f4; base = port ? 0x170 : 0x1f0; } - if ((hwif = ide_match_hwif(base, bootable, d->name)) == NULL) - return NULL; /* no room in ide_hwifs[] */ - if (hwif->io_ports[IDE_DATA_OFFSET] != base || - hwif->io_ports[IDE_CONTROL_OFFSET] != (ctl | 2)) { - hw_regs_t hw; - - memset(&hw, 0, sizeof(hw)); -#ifndef CONFIG_IDE_ARCH_OBSOLETE_INIT - ide_std_init_ports(&hw, base, ctl | 2); -#else - ide_init_hwif_ports(&hw, base, ctl | 2, NULL); -#endif - memcpy(hwif->io_ports, hw.io_ports, sizeof(hwif->io_ports)); - hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET]; + + hwif = ide_find_port_slot(d); + if (hwif == NULL) { + printk(KERN_ERR "%s: too many IDE interfaces, no room in " + "table\n", d->name); + return NULL; } - hwif->chipset = d->chipset ? d->chipset : ide_pci; - hwif->pci_dev = dev; + + memset(&hw, 0, sizeof(hw)); + hw.irq = irq; + hw.dev = &dev->dev; + hw.chipset = d->chipset ? d->chipset : ide_pci; + ide_std_init_ports(&hw, base, ctl | 2); + + ide_init_port_hw(hwif, &hw); + + hwif->dev = &dev->dev; hwif->cds = d; - hwif->channel = port; - if (!hwif->irq) - hwif->irq = irq; - if (mate) { - hwif->mate = mate; - mate->mate = hwif; - } return hwif; } +#ifdef CONFIG_BLK_DEV_IDEDMA_PCI /** * ide_hwif_setup_dma - configure DMA interface - * @dev: PCI device - * @d: IDE port info * @hwif: IDE interface + * @d: IDE port info * * Set up the DMA base for the interface. Enable the master bits as * necessary and attempt to bring the device DMA into a ready to use * state */ -static void ide_hwif_setup_dma(struct pci_dev *dev, const struct ide_port_info *d, ide_hwif_t *hwif) +void ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d) { -#ifdef CONFIG_BLK_DEV_IDEDMA_PCI + struct pci_dev *dev = to_pci_dev(hwif->dev); u16 pcicmd; pci_read_config_word(dev, PCI_COMMAND, &pcicmd); @@ -436,9 +343,9 @@ static void ide_hwif_setup_dma(struct pci_dev *dev, const struct ide_port_info * unsigned long dma_base = ide_get_or_set_dma_base(d, hwif); if (dma_base && !(pcicmd & PCI_COMMAND_MASTER)) { /* - * Set up BM-DMA capability + * Set up BM-DMA capability * (PnP BIOS should have done this) - */ + */ pci_set_master(dev); if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) || !(pcicmd & PCI_COMMAND_MASTER)) { printk(KERN_ERR "%s: %s error updating PCICMD\n", @@ -450,15 +357,15 @@ static void ide_hwif_setup_dma(struct pci_dev *dev, const struct ide_port_info * if (d->init_dma) { d->init_dma(hwif, dma_base); } else { - ide_setup_dma(hwif, dma_base, 8); + ide_setup_dma(hwif, dma_base); } } else { printk(KERN_INFO "%s: %s Bus-Master DMA disabled " "(BIOS)\n", hwif->name, d->name); } } -#endif /* CONFIG_BLK_DEV_IDEDMA_PCI*/ } +#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ /** * ide_setup_pci_controller - set up IDE PCI @@ -520,7 +427,7 @@ out: void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int pciirq, u8 *idx) { int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port; - ide_hwif_t *hwif, *mate = NULL; + ide_hwif_t *hwif; u8 tmp; /* @@ -536,63 +443,13 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int continue; /* port not enabled */ } - if ((hwif = ide_hwif_configure(dev, d, mate, port, pciirq)) == NULL) + hwif = ide_hwif_configure(dev, d, port, pciirq); + if (hwif == NULL) continue; - /* setup proper ancestral information */ - hwif->gendev.parent = &dev->dev; - *(idx + port) = hwif->index; - - - if (d->init_iops) - d->init_iops(hwif); - - if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) - ide_hwif_setup_dma(dev, d, hwif); - - if ((!hwif->irq && (d->host_flags & IDE_HFLAG_LEGACY_IRQS)) || - (d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS)) - hwif->irq = port ? 15 : 14; - - hwif->host_flags = d->host_flags; - hwif->pio_mask = d->pio_mask; - - if ((d->host_flags & IDE_HFLAG_SERIALIZE) && hwif->mate) - hwif->mate->serialized = hwif->serialized = 1; - - if (d->host_flags & IDE_HFLAG_IO_32BIT) { - hwif->drives[0].io_32bit = 1; - hwif->drives[1].io_32bit = 1; - } - - if (d->host_flags & IDE_HFLAG_UNMASK_IRQS) { - hwif->drives[0].unmask = 1; - hwif->drives[1].unmask = 1; - } - - if (hwif->dma_base) { - hwif->swdma_mask = d->swdma_mask; - hwif->mwdma_mask = d->mwdma_mask; - hwif->ultra_mask = d->udma_mask; - } - - hwif->drives[0].autotune = 1; - hwif->drives[1].autotune = 1; - - if (d->host_flags & IDE_HFLAG_RQSIZE_256) - hwif->rqsize = 256; - - if (d->init_hwif) - /* Call chipset-specific routine - * for each enabled hwif - */ - d->init_hwif(hwif); - - mate = hwif; } } - EXPORT_SYMBOL_GPL(ide_pci_setup_ports); /* @@ -671,11 +528,10 @@ int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d) ret = do_ide_setup_pci_device(dev, d, &idx[0], 1); if (ret >= 0) - ide_device_add(idx); + ide_device_add(idx, d); return ret; } - EXPORT_SYMBOL_GPL(ide_setup_pci_device); int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2, @@ -695,112 +551,8 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2, goto out; } - ide_device_add(idx); + ide_device_add(idx, d); out: return ret; } - EXPORT_SYMBOL_GPL(ide_setup_pci_devices); - -#ifdef CONFIG_IDEPCI_PCIBUS_ORDER -/* - * Module interfaces - */ - -static int pre_init = 1; /* Before first ordered IDE scan */ -static LIST_HEAD(ide_pci_drivers); - -/* - * __ide_pci_register_driver - attach IDE driver - * @driver: pci driver - * @module: owner module of the driver - * - * Registers a driver with the IDE layer. The IDE layer arranges that - * boot time setup is done in the expected device order and then - * hands the controllers off to the core PCI code to do the rest of - * the work. - * - * Returns are the same as for pci_register_driver - */ - -int __ide_pci_register_driver(struct pci_driver *driver, struct module *module, - const char *mod_name) -{ - if (!pre_init) - return __pci_register_driver(driver, module, mod_name); - driver->driver.owner = module; - list_add_tail(&driver->node, &ide_pci_drivers); - return 0; -} -EXPORT_SYMBOL_GPL(__ide_pci_register_driver); - -/** - * ide_scan_pcidev - find an IDE driver for a device - * @dev: PCI device to check - * - * Look for an IDE driver to handle the device we are considering. - * This is only used during boot up to get the ordering correct. After - * boot up the pci layer takes over the job. - */ - -static int __init ide_scan_pcidev(struct pci_dev *dev) -{ - struct list_head *l; - struct pci_driver *d; - - list_for_each(l, &ide_pci_drivers) { - d = list_entry(l, struct pci_driver, node); - if (d->id_table) { - const struct pci_device_id *id = - pci_match_id(d->id_table, dev); - - if (id != NULL && d->probe(dev, id) >= 0) { - dev->driver = d; - pci_dev_get(dev); - return 1; - } - } - } - return 0; -} - -/** - * ide_scan_pcibus - perform the initial IDE driver scan - * - * Perform the initial bus rather than driver ordered scan of the - * PCI drivers. After this all IDE pci handling becomes standard - * module ordering not traditionally ordered. - */ - -int __init ide_scan_pcibus(void) -{ - struct pci_dev *dev = NULL; - struct pci_driver *d; - struct list_head *l, *n; - - pre_init = 0; - if (!ide_scan_direction) - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev))) - ide_scan_pcidev(dev); - else - while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID, - dev))) - ide_scan_pcidev(dev); - - /* - * Hand the drivers over to the PCI layer now we - * are post init. - */ - - list_for_each_safe(l, n, &ide_pci_drivers) { - list_del(l); - d = list_entry(l, struct pci_driver, node); - if (__pci_register_driver(d, d->driver.owner, - d->driver.mod_name)) - printk(KERN_ERR "%s: failed to register %s driver\n", - __FUNCTION__, d->driver.mod_name); - } - - return 0; -} -#endif