X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fide%2Fpci%2Fpiix.c;h=b66f9d1411b35c18d92709b58cb35979f8af5db2;hb=f212ff28f08e4ddcef9f25b13463c45cc4204a0c;hp=8b219dd630241f4285512e61a9b417872c5147e8;hpb=2c4f365ad2361c93c097e958b2b0a7a112750228;p=linux-2.6 diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index 8b219dd630..b66f9d1411 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/piix.c Version 0.47 February 8, 2007 + * linux/drivers/ide/pci/piix.c Version 0.51 Jul 6, 2007 * * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick @@ -109,7 +109,7 @@ static int no_piix_dma; * piix_dma_2_pio - return the PIO mode matching DMA * @xfer_rate: transfer speed * - * Returns the nearest equivalent PIO timing for the PIO or DMA + * Returns the nearest equivalent PIO timing for the DMA * mode requested by the controller. */ @@ -123,20 +123,14 @@ static u8 piix_dma_2_pio (u8 xfer_rate) { case XFER_UDMA_1: case XFER_UDMA_0: case XFER_MW_DMA_2: - case XFER_PIO_4: return 4; case XFER_MW_DMA_1: - case XFER_PIO_3: return 3; case XFER_SW_DMA_2: - case XFER_PIO_2: return 2; case XFER_MW_DMA_0: case XFER_SW_DMA_1: case XFER_SW_DMA_0: - case XFER_PIO_1: - case XFER_PIO_0: - case XFER_PIO_SLOW: default: return 0; } @@ -219,7 +213,7 @@ static void piix_tune_pio (ide_drive_t *drive, u8 pio) */ static void piix_tune_drive (ide_drive_t *drive, u8 pio) { - pio = ide_get_best_pio_mode(drive, pio, 4, NULL); + pio = ide_get_best_pio_mode(drive, pio, 4); piix_tune_pio(drive, pio); (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio); } @@ -227,19 +221,18 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio) /** * piix_tune_chipset - tune a PIIX interface * @drive: IDE drive to tune - * @xferspeed: speed to configure + * @speed: speed to configure * * Set a PIIX interface channel to the desired speeds. This involves * requires the right timing data into the PIIX configuration space * then setting the drive parameters appropriately */ - -static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed) + +static int piix_tune_chipset(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; u8 maslave = hwif->channel ? 0x42 : 0x40; - u8 speed = ide_rate_filter(drive, xferspeed); int a_speed = 3 << (drive->dn * 4); int u_flag = 1 << drive->dn; int v_flag = 0x01 << drive->dn; @@ -269,6 +262,7 @@ static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed) case XFER_PIO_4: case XFER_PIO_3: case XFER_PIO_2: + case XFER_PIO_1: case XFER_PIO_0: break; default: return -1; } @@ -299,7 +293,11 @@ static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed) pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); } - piix_tune_pio(drive, piix_dma_2_pio(speed)); + if (speed > XFER_PIO_4) + piix_tune_pio(drive, piix_dma_2_pio(speed)); + else + piix_tune_pio(drive, speed - XFER_PIO_0); + return ide_config_drive_speed(drive, speed); } @@ -394,14 +392,45 @@ static void piix_dma_clear_irq(ide_drive_t *drive) hwif->OUTB(dma_stat, hwif->dma_status); } -static int __devinit piix_cable_detect(ide_hwif_t *hwif) +struct ich_laptop { + u16 device; + u16 subvendor; + u16 subdevice; +}; + +/* + * List of laptops that use short cables rather than 80 wire + */ + +static const struct ich_laptop ich_laptop[] = { + /* devid, subvendor, subdev */ + { 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */ + { 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */ + { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ + { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on Acer Aspire 2023WLMi */ + /* end marker */ + { 0, } +}; + +static u8 __devinit piix_cable_detect(ide_hwif_t *hwif) { - struct pci_dev *dev = hwif->pci_dev; + struct pci_dev *pdev = hwif->pci_dev; + const struct ich_laptop *lap = &ich_laptop[0]; u8 reg54h = 0, mask = hwif->channel ? 0xc0 : 0x30; - pci_read_config_byte(dev, 0x54, ®54h); + /* check for specials */ + while (lap->device) { + if (lap->device == pdev->device && + lap->subvendor == pdev->subsystem_vendor && + lap->subdevice == pdev->subsystem_device) { + return ATA_CBL_PATA40_SHORT; + } + lap++; + } + + pci_read_config_byte(pdev, 0x54, ®54h); - return (reg54h & mask) ? 1 : 0; + return (reg54h & mask) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; } /** @@ -444,8 +473,8 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif) hwif->swdma_mask = 0x04; if (hwif->ultra_mask & 0x78) { - if (!hwif->udma_four) - hwif->udma_four = piix_cable_detect(hwif); + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = piix_cable_detect(hwif); } if (no_piix_dma) @@ -464,10 +493,10 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif) .name = name_str, \ .init_chipset = init_chipset_piix, \ .init_hwif = init_hwif_piix, \ - .channels = 2, \ .autodma = AUTODMA, \ .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \ .bootable = ON_BOARD, \ + .pio_mask = ATA_PIO4, \ .udma_mask = udma, \ } @@ -483,11 +512,11 @@ static ide_pci_device_t piix_pci_info[] __devinitdata = { */ .name = "MPIIX", .init_hwif = init_hwif_piix, - .channels = 2, .autodma = NODMA, .enablebits = {{0x6d,0xc0,0x80}, {0x6d,0xc0,0xc0}}, .bootable = ON_BOARD, - .flags = IDEPCI_FLAG_ISA_PORTS + .host_flags = IDE_HFLAG_ISA_PORTS, + .pio_mask = ATA_PIO4, }, /* 3 */ DECLARE_PIIX_DEV("PIIX3", 0x00), /* no udma */ @@ -541,18 +570,16 @@ static void __devinit piix_check_450nx(void) { struct pci_dev *pdev = NULL; u16 cfg; - u8 rev; while((pdev=pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev))!=NULL) { /* Look for 450NX PXB. Check for problem configurations A PCI quirk checks bit 6 already */ - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); pci_read_config_word(pdev, 0x41, &cfg); /* Only on the original revision: IDE DMA can hang */ - if(rev == 0x00) + if (pdev->revision == 0x00) no_piix_dma = 1; /* On all revisions below 5 PXB bus lock must be disabled for IDE */ - else if(cfg & (1<<14) && rev < 5) + else if (cfg & (1<<14) && pdev->revision < 5) no_piix_dma = 2; } if(no_piix_dma)