X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fide%2Flegacy%2Fht6560b.c;h=78ca68e60f97e141dd9fc96806aa8d33bcaafb10;hb=0f151e8b214c1df3f571020b849382933f2cdce7;hp=2e5a9cc5c0f7ab1a48a2b26bef35ca12922f4837;hpb=e3d18658d4f28e4783e1bb1c41e9134c9e5db0a9;p=linux-2.6 diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c index 2e5a9cc5c0..78ca68e60f 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c @@ -1,6 +1,4 @@ /* - * linux/drivers/ide/legacy/ht6560b.c Version 0.07 Feb 1, 2000 - * * Copyright (C) 1995-2000 Linus Torvalds & author (see below) */ @@ -23,18 +21,21 @@ * "Prefetch" mode bit OFF for ide disks and * ON for anything else. * + * Version 0.08 Need to force prefetch for CDs and other non-disk + * devices. (not sure which devices exactly need + * prefetch) * * HT-6560B EIDE-controller support * To activate controller support use kernel parameter "ide0=ht6560b". * Use hdparm utility to enable PIO mode support. * * Author: Mikko Ala-Fossi - * Jan Evert van Grootheest + * Jan Evert van Grootheest * * Try: http://www.maf.iki.fi/~maf/ht6560b/ */ -#define HT6560B_VERSION "v0.07" +#define HT6560B_VERSION "v0.08" #include #include @@ -132,15 +133,20 @@ static void ht6560b_selectproc (ide_drive_t *drive) u8 select, timing; local_irq_save(flags); - + select = HT_CONFIG(drive); timing = HT_TIMING(drive); - + + /* + * Need to enforce prefetch sometimes because otherwise + * it'll hang (hard). + */ + if (drive->media != ide_disk || !drive->present) + select |= HT_PREFETCH_MODE; + if (select != current_select || timing != current_timing) { current_select = select; current_timing = timing; - if (drive->media != ide_disk || !drive->present) - select |= HT_PREFETCH_MODE; (void)inb(HT_CONFIG_PORT); (void)inb(HT_CONFIG_PORT); (void)inb(HT_CONFIG_PORT); @@ -190,11 +196,12 @@ static int __init try_to_init_ht6560b(void) outb(HT_TIMING_DEFAULT, 0x1f6); /* IDE_SELECT_REG */ (void) inb(0x1f7); /* IDE_STATUS_REG */ - printk("\nht6560b " HT6560B_VERSION + printk("ht6560b " HT6560B_VERSION ": chipset detected and initialized" #ifdef DEBUG " with debug enabled" #endif + "\n" ); return 1; } @@ -247,6 +254,8 @@ static u8 ht_pio2timings(ide_drive_t *drive, const u8 pio) } } +static DEFINE_SPINLOCK(ht6560b_lock); + /* * Enable/Disable so called prefetch mode */ @@ -254,9 +263,9 @@ static void ht_set_prefetch(ide_drive_t *drive, u8 state) { unsigned long flags; int t = HT_PREFETCH_MODE << 8; - - spin_lock_irqsave(&ide_lock, flags); - + + spin_lock_irqsave(&ht6560b_lock, flags); + /* * Prefetch mode and unmask irq seems to conflict */ @@ -268,9 +277,9 @@ static void ht_set_prefetch(ide_drive_t *drive, u8 state) drive->drive_data &= ~t; /* disable prefetch mode */ drive->no_unmask = 0; } - - spin_unlock_irqrestore(&ide_lock, flags); - + + spin_unlock_irqrestore(&ht6560b_lock, flags); + #ifdef DEBUG printk("ht6560b: drive %s prefetch mode %sabled\n", drive->name, (state ? "en" : "dis")); #endif @@ -287,31 +296,49 @@ static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio) ht_set_prefetch(drive, pio & 1); return; } - + timing = ht_pio2timings(drive, pio); - - spin_lock_irqsave(&ide_lock, flags); - + + spin_lock_irqsave(&ht6560b_lock, flags); drive->drive_data &= 0xff00; drive->drive_data |= timing; - - spin_unlock_irqrestore(&ide_lock, flags); - + spin_unlock_irqrestore(&ht6560b_lock, flags); + #ifdef DEBUG printk("ht6560b: drive %s tuned to pio mode %#x timing=%#x\n", drive->name, pio, timing); #endif } +static void __init ht6560b_port_init_devs(ide_hwif_t *hwif) +{ + /* Setting default configurations for drives. */ + int t = (HT_CONFIG_DEFAULT << 8) | HT_TIMING_DEFAULT; + + if (hwif->channel) + t |= (HT_SECONDARY_IF << 8); + + hwif->drives[0].drive_data = t; + hwif->drives[1].drive_data = t; +} + int probe_ht6560b = 0; module_param_named(probe, probe_ht6560b, bool, 0); MODULE_PARM_DESC(probe, "probe for HT6560B chipset"); -/* Can be called directly from ide.c. */ -int __init ht6560b_init(void) +static const struct ide_port_info ht6560b_port_info __initdata = { + .chipset = ide_ht6560b, + .host_flags = IDE_HFLAG_SERIALIZE | /* is this needed? */ + IDE_HFLAG_NO_DMA | + IDE_HFLAG_NO_AUTOTUNE | + IDE_HFLAG_ABUSE_PREFETCH, + .pio_mask = ATA_PIO4, +}; + +static int __init ht6560b_init(void) { ide_hwif_t *hwif, *mate; - int t; + static u8 idx[4] = { 0, 1, 0xff, 0xff }; if (probe_ht6560b == 0) return -ENODEV; @@ -330,40 +357,16 @@ int __init ht6560b_init(void) goto release_region; } - hwif->chipset = ide_ht6560b; hwif->selectproc = &ht6560b_selectproc; - hwif->host_flags = IDE_HFLAG_ABUSE_PREFETCH; - hwif->pio_mask = ATA_PIO5; hwif->set_pio_mode = &ht6560b_set_pio_mode; - hwif->serialized = 1; /* is this needed? */ - hwif->mate = mate; - mate->chipset = ide_ht6560b; mate->selectproc = &ht6560b_selectproc; - mate->host_flags = IDE_HFLAG_ABUSE_PREFETCH; - mate->pio_mask = ATA_PIO5; mate->set_pio_mode = &ht6560b_set_pio_mode; - mate->serialized = 1; /* is this needed? */ - mate->mate = hwif; - mate->channel = 1; - - /* - * Setting default configurations for drives - */ - t = (HT_CONFIG_DEFAULT << 8); - t |= HT_TIMING_DEFAULT; - hwif->drives[0].drive_data = t; - hwif->drives[1].drive_data = t; - t |= (HT_SECONDARY_IF << 8); - mate->drives[0].drive_data = t; - mate->drives[1].drive_data = t; + hwif->port_init_devs = ht6560b_port_init_devs; + mate->port_init_devs = ht6560b_port_init_devs; - probe_hwif_init(hwif); - probe_hwif_init(mate); - - ide_proc_register_port(hwif); - ide_proc_register_port(mate); + ide_device_add(idx, &ht6560b_port_info); return 0; @@ -372,9 +375,7 @@ release_region: return -ENODEV; } -#ifdef MODULE module_init(ht6560b_init); -#endif MODULE_AUTHOR("See Local File"); MODULE_DESCRIPTION("HT-6560B EIDE-controller support");