X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fide%2Fide-lib.c;h=29e2c9719c307e4147b624dcf4b188ab1f8d484c;hb=235ffa136c09c56db0c6c5fc5b5832749a72f557;hp=8649db33f67dcc1fa837067613883c94ff5b3525;hpb=e62925dd26ef9594b8e4b9380b3211f6dae4ab96;p=linux-2.6

diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 8649db33f6..29e2c9719c 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -21,15 +21,6 @@
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
-/*
- *	IDE library routines. These are plug in code that most 
- *	drivers can use but occasionally may be weird enough
- *	to want to do their own thing with
- *
- *	Add common non I/O op stuff here. Make sure it has proper
- *	kernel-doc function headers or your patch will be rejected
- */
-
 static const char *udma_str[] =
 	 { "UDMA/16", "UDMA/25",  "UDMA/33",  "UDMA/44",
 	   "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" };
@@ -358,8 +349,10 @@ void ide_toggle_bounce(ide_drive_t *drive, int on)
 	if (!PCI_DMA_BUS_IS_PHYS) {
 		addr = BLK_BOUNCE_ANY;
 	} else if (on && drive->media == ide_disk) {
-		if (HWIF(drive)->pci_dev)
-			addr = HWIF(drive)->pci_dev->dma_mask;
+		struct device *dev = drive->hwif->dev;
+
+		if (dev && dev->dma_mask)
+			addr = *dev->dma_mask;
 	}
 
 	if (drive->queue)
@@ -441,6 +434,12 @@ int ide_set_xfer_rate(ide_drive_t *drive, u8 rate)
 	 * case could happen iff the transfer mode has already been set on
 	 * the device by ide-proc.c::set_xfer_rate()).
 	 */
+	if (rate < XFER_PIO_0) {
+		if (hwif->host_flags & IDE_HFLAG_ABUSE_SET_DMA_MODE)
+			return ide_set_dma_mode(drive, rate);
+		else
+			return ide_config_drive_speed(drive, rate);
+	}
 
 	return ide_set_dma_mode(drive, rate);
 }
@@ -448,8 +447,7 @@ int ide_set_xfer_rate(ide_drive_t *drive, u8 rate)
 static void ide_dump_opcode(ide_drive_t *drive)
 {
 	struct request *rq;
-	u8 opcode = 0;
-	int found = 0;
+	ide_task_t *task = NULL;
 
 	spin_lock(&ide_lock);
 	rq = NULL;
@@ -458,25 +456,15 @@ static void ide_dump_opcode(ide_drive_t *drive)
 	spin_unlock(&ide_lock);
 	if (!rq)
 		return;
-	if (rq->cmd_type == REQ_TYPE_ATA_CMD) {
-		char *args = rq->buffer;
-		if (args) {
-			opcode = args[0];
-			found = 1;
-		}
-	} else if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
-		ide_task_t *args = rq->special;
-		if (args) {
-			opcode = args->tf.command;
-			found = 1;
-		}
-	}
+
+	if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
+		task = rq->special;
 
 	printk("ide: failed opcode was: ");
-	if (!found)
-		printk("unknown\n");
+	if (task == NULL)
+		printk(KERN_CONT "unknown\n");
 	else
-		printk("0x%02x\n", opcode);
+		printk(KERN_CONT "0x%02x\n", task->tf.command);
 }
 
 u64 ide_get_lba_addr(struct ide_taskfile *tf, int lba48)
@@ -581,7 +569,7 @@ u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat)
 	}
 	printk("}\n");
 	if ((stat & (BUSY_STAT|ERR_STAT)) == ERR_STAT) {
-		err = drive->hwif->INB(IDE_ERROR_REG);
+		err = ide_read_error(drive);
 		printk("%s: %s: error=0x%02x ", drive->name, msg, err);
 		if (drive->media == ide_disk)
 			ide_dump_ata_error(drive, err);