X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fide%2Fide-cd.h;h=a58801c4484d309177afe8b7d32aa77c7ac7f91f;hb=a1716d508abf77e4bd02c275ab9293b9866929f3;hp=34e9291c0a8ed43224d0efd1d82f4d7c8e37336b;hpb=cdf6000d7e332d0f7f14233e71dee489628f5aae;p=linux-2.6 diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index 34e9291c0a..a58801c448 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -1,6 +1,4 @@ /* - * linux/drivers/ide/ide_cd.h - * * Copyright (C) 1996-98 Erik Andersen * Copyright (C) 1998-2000 Jens Axboe */ @@ -10,14 +8,6 @@ #include #include -/* Turn this on to have the driver print out the meanings of the - ATAPI error codes. This will use up additional kernel-space - memory, though. */ - -#ifndef VERBOSE_IDE_CD_ERRORS -#define VERBOSE_IDE_CD_ERRORS 1 -#endif - /* * typical timeout for packet command */ @@ -44,8 +34,8 @@ enum { IDE_CD_FLAG_NO_DOORLOCK = (1 << 1), /* Drive cannot eject the disc. */ IDE_CD_FLAG_NO_EJECT = (1 << 2), - /* Drive is a pre-1.2 NEC 260 drive. */ - IDE_CD_FLAG_NEC260 = (1 << 3), + /* Drive is a pre ATAPI 1.2 drive. */ + IDE_CD_FLAG_PRE_ATAPI12 = (1 << 3), /* TOC addresses are in BCD. */ IDE_CD_FLAG_TOCADDR_AS_BCD = (1 << 4), /* TOC track numbers are in BCD. */ @@ -65,6 +55,12 @@ enum { IDE_CD_FLAG_DOOR_LOCKED = (1 << 10), /* SET_CD_SPEED command is unsupported. */ IDE_CD_FLAG_NO_SPEED_SELECT = (1 << 11), + IDE_CD_FLAG_VERTOS_300_SSD = (1 << 12), + IDE_CD_FLAG_VERTOS_600_ESD = (1 << 13), + IDE_CD_FLAG_SANYO_3CD = (1 << 14), + IDE_CD_FLAG_FULL_CAPS_PAGE = (1 << 15), + IDE_CD_FLAG_PLAY_AUDIO_OK = (1 << 16), + IDE_CD_FLAG_LE_SPEED_FIELDS = (1 << 17), }; /* Structure of a MSF cdrom address. */ @@ -123,10 +119,6 @@ struct cdrom_info { struct atapi_toc *toc; - unsigned long sector_buffered; - unsigned long nsectors_buffered; - unsigned char *buffer; - /* The result of the last successful request sense command on this device. */ struct request_sense sense_data; @@ -147,250 +139,30 @@ struct cdrom_info { unsigned long write_timeout; }; -/**************************************************************************** - * Descriptions of ATAPI error codes. - */ - -/* This stuff should be in cdrom.h, since it is now generic... */ - -/* ATAPI sense keys (from table 140 of ATAPI 2.6) */ -#define NO_SENSE 0x00 -#define RECOVERED_ERROR 0x01 -#define NOT_READY 0x02 -#define MEDIUM_ERROR 0x03 -#define HARDWARE_ERROR 0x04 -#define ILLEGAL_REQUEST 0x05 -#define UNIT_ATTENTION 0x06 -#define DATA_PROTECT 0x07 -#define BLANK_CHECK 0x08 -#define ABORTED_COMMAND 0x0b -#define MISCOMPARE 0x0e - - - -/* This stuff should be in cdrom.h, since it is now generic... */ -#if VERBOSE_IDE_CD_ERRORS - - /* The generic packet command opcodes for CD/DVD Logical Units, - * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */ -static const struct { - unsigned short packet_command; - const char * const text; -} packet_command_texts[] = { - { GPCMD_TEST_UNIT_READY, "Test Unit Ready" }, - { GPCMD_REQUEST_SENSE, "Request Sense" }, - { GPCMD_FORMAT_UNIT, "Format Unit" }, - { GPCMD_INQUIRY, "Inquiry" }, - { GPCMD_START_STOP_UNIT, "Start/Stop Unit" }, - { GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, "Prevent/Allow Medium Removal" }, - { GPCMD_READ_FORMAT_CAPACITIES, "Read Format Capacities" }, - { GPCMD_READ_CDVD_CAPACITY, "Read Cd/Dvd Capacity" }, - { GPCMD_READ_10, "Read 10" }, - { GPCMD_WRITE_10, "Write 10" }, - { GPCMD_SEEK, "Seek" }, - { GPCMD_WRITE_AND_VERIFY_10, "Write and Verify 10" }, - { GPCMD_VERIFY_10, "Verify 10" }, - { GPCMD_FLUSH_CACHE, "Flush Cache" }, - { GPCMD_READ_SUBCHANNEL, "Read Subchannel" }, - { GPCMD_READ_TOC_PMA_ATIP, "Read Table of Contents" }, - { GPCMD_READ_HEADER, "Read Header" }, - { GPCMD_PLAY_AUDIO_10, "Play Audio 10" }, - { GPCMD_GET_CONFIGURATION, "Get Configuration" }, - { GPCMD_PLAY_AUDIO_MSF, "Play Audio MSF" }, - { GPCMD_PLAYAUDIO_TI, "Play Audio TrackIndex" }, - { GPCMD_GET_EVENT_STATUS_NOTIFICATION, "Get Event Status Notification" }, - { GPCMD_PAUSE_RESUME, "Pause/Resume" }, - { GPCMD_STOP_PLAY_SCAN, "Stop Play/Scan" }, - { GPCMD_READ_DISC_INFO, "Read Disc Info" }, - { GPCMD_READ_TRACK_RZONE_INFO, "Read Track Rzone Info" }, - { GPCMD_RESERVE_RZONE_TRACK, "Reserve Rzone Track" }, - { GPCMD_SEND_OPC, "Send OPC" }, - { GPCMD_MODE_SELECT_10, "Mode Select 10" }, - { GPCMD_REPAIR_RZONE_TRACK, "Repair Rzone Track" }, - { GPCMD_MODE_SENSE_10, "Mode Sense 10" }, - { GPCMD_CLOSE_TRACK, "Close Track" }, - { GPCMD_BLANK, "Blank" }, - { GPCMD_SEND_EVENT, "Send Event" }, - { GPCMD_SEND_KEY, "Send Key" }, - { GPCMD_REPORT_KEY, "Report Key" }, - { GPCMD_LOAD_UNLOAD, "Load/Unload" }, - { GPCMD_SET_READ_AHEAD, "Set Read-ahead" }, - { GPCMD_READ_12, "Read 12" }, - { GPCMD_GET_PERFORMANCE, "Get Performance" }, - { GPCMD_SEND_DVD_STRUCTURE, "Send DVD Structure" }, - { GPCMD_READ_DVD_STRUCTURE, "Read DVD Structure" }, - { GPCMD_SET_STREAMING, "Set Streaming" }, - { GPCMD_READ_CD_MSF, "Read CD MSF" }, - { GPCMD_SCAN, "Scan" }, - { GPCMD_SET_SPEED, "Set Speed" }, - { GPCMD_PLAY_CD, "Play CD" }, - { GPCMD_MECHANISM_STATUS, "Mechanism Status" }, - { GPCMD_READ_CD, "Read CD" }, -}; - - - -/* From Table 303 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */ -static const char * const sense_key_texts[16] = { - "No sense data", - "Recovered error", - "Not ready", - "Medium error", - "Hardware error", - "Illegal request", - "Unit attention", - "Data protect", - "Blank check", - "(reserved)", - "(reserved)", - "Aborted command", - "(reserved)", - "(reserved)", - "Miscompare", - "(reserved)", -}; - -/* From Table 304 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */ -static const struct { - unsigned long asc_ascq; - const char * const text; -} sense_data_texts[] = { - { 0x000000, "No additional sense information" }, - { 0x000011, "Play operation in progress" }, - { 0x000012, "Play operation paused" }, - { 0x000013, "Play operation successfully completed" }, - { 0x000014, "Play operation stopped due to error" }, - { 0x000015, "No current audio status to return" }, - { 0x010c0a, "Write error - padding blocks added" }, - { 0x011700, "Recovered data with no error correction applied" }, - { 0x011701, "Recovered data with retries" }, - { 0x011702, "Recovered data with positive head offset" }, - { 0x011703, "Recovered data with negative head offset" }, - { 0x011704, "Recovered data with retries and/or CIRC applied" }, - { 0x011705, "Recovered data using previous sector ID" }, - { 0x011800, "Recovered data with error correction applied" }, - { 0x011801, "Recovered data with error correction and retries applied"}, - { 0x011802, "Recovered data - the data was auto-reallocated" }, - { 0x011803, "Recovered data with CIRC" }, - { 0x011804, "Recovered data with L-EC" }, - { 0x015d00, - "Failure prediction threshold exceeded - Predicted logical unit failure" }, - { 0x015d01, - "Failure prediction threshold exceeded - Predicted media failure" }, - { 0x015dff, "Failure prediction threshold exceeded - False" }, - { 0x017301, "Power calibration area almost full" }, - { 0x020400, "Logical unit not ready - cause not reportable" }, - /* Following is misspelled in ATAPI 2.6, _and_ in Mt. Fuji */ - { 0x020401, - "Logical unit not ready - in progress [sic] of becoming ready" }, - { 0x020402, "Logical unit not ready - initializing command required" }, - { 0x020403, "Logical unit not ready - manual intervention required" }, - { 0x020404, "Logical unit not ready - format in progress" }, - { 0x020407, "Logical unit not ready - operation in progress" }, - { 0x020408, "Logical unit not ready - long write in progress" }, - { 0x020600, "No reference position found (media may be upside down)" }, - { 0x023000, "Incompatible medium installed" }, - { 0x023a00, "Medium not present" }, - { 0x025300, "Media load or eject failed" }, - { 0x025700, "Unable to recover table of contents" }, - { 0x030300, "Peripheral device write fault" }, - { 0x030301, "No write current" }, - { 0x030302, "Excessive write errors" }, - { 0x030c00, "Write error" }, - { 0x030c01, "Write error - Recovered with auto reallocation" }, - { 0x030c02, "Write error - auto reallocation failed" }, - { 0x030c03, "Write error - recommend reassignment" }, - { 0x030c04, "Compression check miscompare error" }, - { 0x030c05, "Data expansion occurred during compress" }, - { 0x030c06, "Block not compressible" }, - { 0x030c07, "Write error - recovery needed" }, - { 0x030c08, "Write error - recovery failed" }, - { 0x030c09, "Write error - loss of streaming" }, - { 0x031100, "Unrecovered read error" }, - { 0x031106, "CIRC unrecovered error" }, - { 0x033101, "Format command failed" }, - { 0x033200, "No defect spare location available" }, - { 0x033201, "Defect list update failure" }, - { 0x035100, "Erase failure" }, - { 0x037200, "Session fixation error" }, - { 0x037201, "Session fixation error writin lead-in" }, - { 0x037202, "Session fixation error writin lead-out" }, - { 0x037300, "CD control error" }, - { 0x037302, "Power calibration area is full" }, - { 0x037303, "Power calibration area error" }, - { 0x037304, "Program memory area / RMA update failure" }, - { 0x037305, "Program memory area / RMA is full" }, - { 0x037306, "Program memory area / RMA is (almost) full" }, - - { 0x040200, "No seek complete" }, - { 0x040300, "Write fault" }, - { 0x040900, "Track following error" }, - { 0x040901, "Tracking servo failure" }, - { 0x040902, "Focus servo failure" }, - { 0x040903, "Spindle servo failure" }, - { 0x041500, "Random positioning error" }, - { 0x041501, "Mechanical positioning or changer error" }, - { 0x041502, "Positioning error detected by read of medium" }, - { 0x043c00, "Mechanical positioning or changer error" }, - { 0x044000, "Diagnostic failure on component (ASCQ)" }, - { 0x044400, "Internal CD/DVD logical unit failure" }, - { 0x04b600, "Media load mechanism failed" }, - { 0x051a00, "Parameter list length error" }, - { 0x052000, "Invalid command operation code" }, - { 0x052100, "Logical block address out of range" }, - { 0x052102, "Invalid address for write" }, - { 0x052400, "Invalid field in command packet" }, - { 0x052600, "Invalid field in parameter list" }, - { 0x052601, "Parameter not supported" }, - { 0x052602, "Parameter value invalid" }, - { 0x052700, "Write protected media" }, - { 0x052c00, "Command sequence error" }, - { 0x052c03, "Current program area is not empty" }, - { 0x052c04, "Current program area is empty" }, - { 0x053001, "Cannot read medium - unknown format" }, - { 0x053002, "Cannot read medium - incompatible format" }, - { 0x053900, "Saving parameters not supported" }, - { 0x054e00, "Overlapped commands attempted" }, - { 0x055302, "Medium removal prevented" }, - { 0x055500, "System resource failure" }, - { 0x056300, "End of user area encountered on this track" }, - { 0x056400, "Illegal mode for this track or incompatible medium" }, - { 0x056f00, "Copy protection key exchange failure - Authentication failure" }, - { 0x056f01, "Copy protection key exchange failure - Key not present" }, - { 0x056f02, "Copy protection key exchange failure - Key not established" }, - { 0x056f03, "Read of scrambled sector without authentication" }, - { 0x056f04, "Media region code is mismatched to logical unit" }, - { 0x056f05, "Drive region must be permanent / region reset count error" }, - { 0x057203, "Session fixation error - incomplete track in session" }, - { 0x057204, "Empty or partially written reserved track" }, - { 0x057205, "No more RZONE reservations are allowed" }, - { 0x05bf00, "Loss of streaming" }, - { 0x062800, "Not ready to ready transition, medium may have changed" }, - { 0x062900, "Power on, reset or hardware reset occurred" }, - { 0x062a00, "Parameters changed" }, - { 0x062a01, "Mode parameters changed" }, - { 0x062e00, "Insufficient time for operation" }, - { 0x063f00, "Logical unit operating conditions have changed" }, - { 0x063f01, "Microcode has been changed" }, - { 0x065a00, "Operator request or state change input (unspecified)" }, - { 0x065a01, "Operator medium removal request" }, - { 0x0bb900, "Play operation aborted" }, - - /* Here we use 0xff for the key (not a valid key) to signify - * that these can have _any_ key value associated with them... */ - { 0xff0401, "Logical unit is in process of becoming ready" }, - { 0xff0400, "Logical unit not ready, cause not reportable" }, - { 0xff0402, "Logical unit not ready, initializing command required" }, - { 0xff0403, "Logical unit not ready, manual intervention required" }, - { 0xff0500, "Logical unit does not respond to selection" }, - { 0xff0800, "Logical unit communication failure" }, - { 0xff0802, "Logical unit communication parity error" }, - { 0xff0801, "Logical unit communication time-out" }, - { 0xff2500, "Logical unit not supported" }, - { 0xff4c00, "Logical unit failed self-configuration" }, - { 0xff3e00, "Logical unit has not self-configured yet" }, -}; -#endif - +/* ide-cd_verbose.c */ +void ide_cd_log_error(const char *, struct request *, struct request_sense *); + +/* ide-cd.c functions used by ide-cd_ioctl.c */ +void ide_cd_init_rq(ide_drive_t *, struct request *); +int ide_cd_queue_pc(ide_drive_t *, struct request *); +int ide_cd_read_toc(ide_drive_t *, struct request_sense *); +int ide_cdrom_get_capabilities(ide_drive_t *, u8 *); +void ide_cdrom_update_speed(ide_drive_t *, u8 *); +int cdrom_check_status(ide_drive_t *, struct request_sense *); + +/* ide-cd_ioctl.c */ +int ide_cdrom_open_real(struct cdrom_device_info *, int); +void ide_cdrom_release_real(struct cdrom_device_info *); +int ide_cdrom_drive_status(struct cdrom_device_info *, int); +int ide_cdrom_check_media_change_real(struct cdrom_device_info *, int); +int ide_cdrom_tray_move(struct cdrom_device_info *, int); +int ide_cdrom_lock_door(struct cdrom_device_info *, int); +int ide_cdrom_select_speed(struct cdrom_device_info *, int); +int ide_cdrom_get_last_session(struct cdrom_device_info *, + struct cdrom_multisession *); +int ide_cdrom_get_mcn(struct cdrom_device_info *, struct cdrom_mcn *); +int ide_cdrom_reset(struct cdrom_device_info *cdi); +int ide_cdrom_audio_ioctl(struct cdrom_device_info *, unsigned int, void *); +int ide_cdrom_packet(struct cdrom_device_info *, struct packet_command *); #endif /* _IDE_CD_H */