X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fide%2FKconfig;h=a34758d29516c3aff28958582a915b5b664ec72e;hb=2fdc86901d2ab30a12402b46238951d2a7891590;hp=7446db6490640ef9915c0cb65d56cbb929579817;hpb=713a590dea9a61e84f2837e75c5e9429d95908b5;p=linux-2.6

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 7446db6490..a34758d295 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -54,16 +54,6 @@ menuconfig IDE
 
 if IDE
 
-config IDE_MAX_HWIFS
-	int "Max IDE interfaces"
-	depends on ALPHA || SUPERH || IA64 || EMBEDDED
-	range 1 10
-	default 4
-	help
-	  This is the maximum number of IDE hardware interfaces that will
-	  be supported by the driver. Make sure it is at least as high as
-	  the number of IDE interfaces in your system.
-
 config BLK_DEV_IDE
 	tristate "Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support"
 	---help---
@@ -314,7 +304,7 @@ comment "IDE chipset support/bugfixes"
 
 config IDE_GENERIC
 	tristate "generic/default IDE chipset support"
-	depends on ALPHA || X86 || IA64 || M32R || MIPS || PPC32
+	depends on ALPHA || X86 || IA64 || M32R || MIPS
 	help
 	  If unsure, say N.
 
@@ -510,6 +500,7 @@ config BLK_DEV_TRIFLEX
 
 config BLK_DEV_CY82C693
 	tristate "CY82C693 chipset support"
+	depends on ALPHA
 	select IDE_TIMINGS
 	select BLK_DEV_IDEDMA_PCI
 	help
@@ -548,6 +539,7 @@ config BLK_DEV_CS5535
 
 config BLK_DEV_HPT34X
 	tristate "HPT34X chipset support"
+	depends on BROKEN
 	select BLK_DEV_IDEDMA_PCI
 	help
 	  This driver adds up to 4 more EIDE devices sharing a single
@@ -703,6 +695,7 @@ config BLK_DEV_SIS5513
 config BLK_DEV_SL82C105
 	tristate "Winbond SL82c105 support"
 	depends on (PPC || ARM)
+	select IDE_TIMINGS
 	select BLK_DEV_IDEDMA_PCI
 	help
 	  If you have a Winbond SL82c105 IDE controller, say Y here to enable
@@ -928,46 +921,6 @@ config BLK_DEV_PALMCHIP_BK3710
 	  Say Y here if you want to support the onchip IDE controller on the
 	  TI DaVinci SoC
 
-
-config BLK_DEV_MPC8xx_IDE
-	tristate "MPC8xx IDE support"
-	depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE
-	help
-	  This option provides support for IDE on Motorola MPC8xx Systems.
-	  Please see 'Type of MPC8xx IDE interface' for details.
-
-	  If unsure, say N.
-
-choice
-	prompt "Type of MPC8xx IDE interface"
-	depends on BLK_DEV_MPC8xx_IDE
-	default IDE_8xx_PCCARD
-
-config IDE_8xx_PCCARD
-	bool "8xx_PCCARD"
-	---help---
-	  Select how the IDE devices are connected to the MPC8xx system:
-
-	  8xx_PCCARD uses the 8xx internal PCMCIA interface in combination
-	  with a PC Card (e.g. ARGOSY portable Hard Disk Adapter),
-	  ATA PC Card HDDs or ATA PC Flash Cards (example: TQM8xxL
-	  systems)
-
-	  8xx_DIRECT is used for directly connected IDE devices using the 8xx
-	  internal PCMCIA interface (example: IVMS8 systems)
-
-	  EXT_DIRECT is used for IDE devices directly connected to the 8xx
-	  bus using some glue logic, but _not_ the 8xx internal
-	  PCMCIA interface (example: IDIF860 systems)
-
-config IDE_8xx_DIRECT
-	bool "8xx_DIRECT"
-
-config IDE_EXT_DIRECT
-	bool "EXT_DIRECT"
-
-endchoice
-
 # no isa -> no vlb
 if ISA && (ALPHA || X86 || MIPS)
 
@@ -1039,30 +992,4 @@ config BLK_DEV_IDEDMA
 
 endif
 
-config BLK_DEV_HD_ONLY
-	bool "Old hard disk (MFM/RLL/IDE) driver"
-	depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN
-	help
-	  There are two drivers for MFM/RLL/IDE hard disks. Most people use
-	  the newer enhanced driver, but this old one is still around for two
-	  reasons. Some older systems have strange timing problems and seem to
-	  work only with the old driver (which itself does not work with some
-	  newer systems). The other reason is that the old driver is smaller,
-	  since it lacks the enhanced functionality of the new one. This makes
-	  it a good choice for systems with very tight memory restrictions, or
-	  for systems with only older MFM/RLL/ESDI drives. Choosing the old
-	  driver can save 13 KB or so of kernel memory.
-
-	  If you want to use this driver together with the new one you have
-	  to use "hda=noprobe hdb=noprobe" kernel parameters to prevent the new
-	  driver from probing the primary interface.
-
-	  If you are unsure, then just choose the Enhanced IDE/MFM/RLL driver
-	  instead of this one. For more detailed information, read the
-	  Disk-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-config BLK_DEV_HD
-	def_bool BLK_DEV_HD_ONLY
-
 endif # IDE