X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fhwmon%2Flm85.c;h=12d446f54f977e5bd68cc0673631dc924bb2ad21;hb=8ff69eebf5bf8a123a117b78412d5efb85765d8b;hp=ee5eca1c1921d9d1f7ba1d67bd638ed9d6ba2cb2;hpb=b4ba0ba24b57ec975482f4ba2d350fbee7557240;p=linux-2.6 diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index ee5eca1c19..12d446f54f 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -1,7 +1,7 @@ /* lm85.c - Part of lm_sensors, Linux kernel modules for hardware monitoring - Copyright (c) 1998, 1999 Frodo Looijaard + Copyright (c) 1998, 1999 Frodo Looijaard Copyright (c) 2002, 2003 Philip Pokorny Copyright (c) 2003 Margit Schubert-While Copyright (c) 2004 Justin Thiessen @@ -51,24 +51,17 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define LM85_REG_TEMP_MAX(nr) (0x4f + (nr) * 2) /* Fan speeds are LSB, MSB (2 bytes) */ -#define LM85_REG_FAN(nr) (0x28 + (nr) *2) -#define LM85_REG_FAN_MIN(nr) (0x54 + (nr) *2) +#define LM85_REG_FAN(nr) (0x28 + (nr) * 2) +#define LM85_REG_FAN_MIN(nr) (0x54 + (nr) * 2) #define LM85_REG_PWM(nr) (0x30 + (nr)) -#define ADT7463_REG_OPPOINT(nr) (0x33 + (nr)) - -#define ADT7463_REG_TMIN_CTL1 0x36 -#define ADT7463_REG_TMIN_CTL2 0x37 - -#define LM85_REG_DEVICE 0x3d #define LM85_REG_COMPANY 0x3e #define LM85_REG_VERSTEP 0x3f /* These are the recognized values for the above regs */ -#define LM85_DEVICE_ADX 0x27 #define LM85_COMPANY_NATIONAL 0x01 #define LM85_COMPANY_ANALOG_DEV 0x41 -#define LM85_COMPANY_SMSC 0x5c +#define LM85_COMPANY_SMSC 0x5c #define LM85_VERSTEP_VMASK 0xf0 #define LM85_VERSTEP_GENERIC 0x60 #define LM85_VERSTEP_LM85C 0x60 @@ -91,58 +84,45 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define LM85_REG_AFAN_CONFIG(nr) (0x5c + (nr)) #define LM85_REG_AFAN_RANGE(nr) (0x5f + (nr)) #define LM85_REG_AFAN_SPIKE1 0x62 -#define LM85_REG_AFAN_SPIKE2 0x63 #define LM85_REG_AFAN_MINPWM(nr) (0x64 + (nr)) #define LM85_REG_AFAN_LIMIT(nr) (0x67 + (nr)) #define LM85_REG_AFAN_CRITICAL(nr) (0x6a + (nr)) #define LM85_REG_AFAN_HYST1 0x6d #define LM85_REG_AFAN_HYST2 0x6e -#define LM85_REG_TACH_MODE 0x74 -#define LM85_REG_SPINUP_CTL 0x75 - -#define ADM1027_REG_TEMP_OFFSET(nr) (0x70 + (nr)) -#define ADM1027_REG_CONFIG2 0x73 -#define ADM1027_REG_INTMASK1 0x74 -#define ADM1027_REG_INTMASK2 0x75 #define ADM1027_REG_EXTEND_ADC1 0x76 #define ADM1027_REG_EXTEND_ADC2 0x77 -#define ADM1027_REG_CONFIG3 0x78 -#define ADM1027_REG_FAN_PPR 0x7b - -#define ADT7463_REG_THERM 0x79 -#define ADT7463_REG_THERM_LIMIT 0x7A #define EMC6D100_REG_ALARM3 0x7d /* IN5, IN6 and IN7 */ -#define EMC6D100_REG_IN(nr) (0x70 + ((nr)-5)) -#define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr)-5) * 2) -#define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr)-5) * 2) +#define EMC6D100_REG_IN(nr) (0x70 + ((nr) - 5)) +#define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr) - 5) * 2) +#define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr) - 5) * 2) #define EMC6D102_REG_EXTEND_ADC1 0x85 #define EMC6D102_REG_EXTEND_ADC2 0x86 #define EMC6D102_REG_EXTEND_ADC3 0x87 #define EMC6D102_REG_EXTEND_ADC4 0x88 -/* Conversions. Rounding and limit checking is only done on the TO_REG +/* Conversions. Rounding and limit checking is only done on the TO_REG variants. Note that you should be a bit careful with which arguments these macros are called: arguments may be evaluated more than once. */ /* IN are scaled acording to built-in resistors */ -static int lm85_scaling[] = { /* .001 Volts */ - 2500, 2250, 3300, 5000, 12000, - 3300, 1500, 1800 /*EMC6D100*/ - }; -#define SCALE(val,from,to) (((val)*(to) + ((from)/2))/(from)) +static const int lm85_scaling[] = { /* .001 Volts */ + 2500, 2250, 3300, 5000, 12000, + 3300, 1500, 1800 /*EMC6D100*/ +}; +#define SCALE(val, from, to) (((val) * (to) + ((from) / 2)) / (from)) -#define INS_TO_REG(n,val) \ - SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255) +#define INS_TO_REG(n, val) \ + SENSORS_LIMIT(SCALE(val, lm85_scaling[n], 192), 0, 255) -#define INSEXT_FROM_REG(n,val,ext) \ +#define INSEXT_FROM_REG(n, val, ext) \ SCALE(((val) << 4) + (ext), 192 << 4, lm85_scaling[n]) -#define INS_FROM_REG(n,val) SCALE((val), 192, lm85_scaling[n]) +#define INS_FROM_REG(n, val) SCALE((val), 192, lm85_scaling[n]) /* FAN speed is measured using 90kHz clock */ static inline u16 FAN_TO_REG(unsigned long val) @@ -151,16 +131,17 @@ static inline u16 FAN_TO_REG(unsigned long val) return 0xffff; return SENSORS_LIMIT(5400000 / val, 1, 0xfffe); } -#define FAN_FROM_REG(val) ((val)==0?-1:(val)==0xffff?0:5400000/(val)) +#define FAN_FROM_REG(val) ((val) == 0 ? -1 : (val) == 0xffff ? 0 : \ + 5400000 / (val)) /* Temperature is reported in .001 degC increments */ #define TEMP_TO_REG(val) \ - SENSORS_LIMIT(SCALE(val,1000,1),-127,127) -#define TEMPEXT_FROM_REG(val,ext) \ + SENSORS_LIMIT(SCALE(val, 1000, 1), -127, 127) +#define TEMPEXT_FROM_REG(val, ext) \ SCALE(((val) << 4) + (ext), 16, 1000) #define TEMP_FROM_REG(val) ((val) * 1000) -#define PWM_TO_REG(val) (SENSORS_LIMIT(val,0,255)) +#define PWM_TO_REG(val) SENSORS_LIMIT(val, 0, 255) #define PWM_FROM_REG(val) (val) @@ -183,17 +164,17 @@ static inline u16 FAN_TO_REG(unsigned long val) */ /* These are the zone temperature range encodings in .001 degree C */ -static int lm85_range_map[] = { - 2000, 2500, 3300, 4000, 5000, 6600, - 8000, 10000, 13300, 16000, 20000, 26600, - 32000, 40000, 53300, 80000 - }; -static int RANGE_TO_REG( int range ) +static const int lm85_range_map[] = { + 2000, 2500, 3300, 4000, 5000, 6600, 8000, 10000, + 13300, 16000, 20000, 26600, 32000, 40000, 53300, 80000 +}; + +static int RANGE_TO_REG(int range) { int i; if (range >= lm85_range_map[15]) - return 15 ; + return 15; /* Find the closest match */ for (i = 14; i >= 0; --i) { @@ -207,28 +188,25 @@ static int RANGE_TO_REG( int range ) return 0; } -#define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f]) +#define RANGE_FROM_REG(val) lm85_range_map[(val) & 0x0f] -/* These are the Acoustic Enhancement, or Temperature smoothing encodings - * NOTE: The enable/disable bit is INCLUDED in these encodings as the - * MSB (bit 3, value 8). If the enable bit is 0, the encoded value - * is ignored, or set to 0. - */ /* These are the PWM frequency encodings */ -static int lm85_freq_map[] = { /* .1 Hz */ - 100, 150, 230, 300, 380, 470, 620, 940 - }; -static int FREQ_TO_REG( int freq ) +static const int lm85_freq_map[] = { /* .1 Hz */ + 100, 150, 230, 300, 380, 470, 620, 940 +}; + +static int FREQ_TO_REG(int freq) { int i; - if( freq >= lm85_freq_map[7] ) { return 7 ; } - for( i = 0 ; i < 7 ; ++i ) - if( freq <= lm85_freq_map[i] ) - break ; - return( i & 0x07 ); + if (freq >= lm85_freq_map[7]) + return 7; + for (i = 0; i < 7; ++i) + if (freq <= lm85_freq_map[i]) + break; + return i; } -#define FREQ_FROM_REG(val) (lm85_freq_map[(val)&0x07]) +#define FREQ_FROM_REG(val) lm85_freq_map[(val) & 0x07] /* Since we can't use strings, I'm abusing these numbers * to stand in for the following meanings: @@ -242,30 +220,23 @@ static int FREQ_TO_REG( int freq ) * -2 -- PWM responds to manual control */ -static int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 }; -#define ZONE_FROM_REG(val) (lm85_zone_map[((val)>>5)&0x07]) +static const int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 }; +#define ZONE_FROM_REG(val) lm85_zone_map[(val) >> 5] -static int ZONE_TO_REG( int zone ) +static int ZONE_TO_REG(int zone) { int i; - for( i = 0 ; i <= 7 ; ++i ) - if( zone == lm85_zone_map[i] ) - break ; - if( i > 7 ) /* Not found. */ + for (i = 0; i <= 7; ++i) + if (zone == lm85_zone_map[i]) + break; + if (i > 7) /* Not found. */ i = 3; /* Always 100% */ - return( (i & 0x07)<<5 ); + return i << 5; } -#define HYST_TO_REG(val) (SENSORS_LIMIT(((val)+500)/1000,0,15)) -#define HYST_FROM_REG(val) ((val)*1000) - -#define OFFSET_TO_REG(val) (SENSORS_LIMIT((val)/25,-127,127)) -#define OFFSET_FROM_REG(val) ((val)*25) - -#define PPR_MASK(fan) (0x03<<(fan *2)) -#define PPR_TO_REG(val,fan) (SENSORS_LIMIT((val)-1,0,3)<<(fan *2)) -#define PPR_FROM_REG(val,fan) ((((val)>>(fan * 2))&0x03)+1) +#define HYST_TO_REG(val) SENSORS_LIMIT(((val) + 500) / 1000, 0, 15) +#define HYST_FROM_REG(val) ((val) * 1000) /* Chip sampling rates * @@ -292,11 +263,11 @@ struct lm85_zone { u8 hyst; /* Low limit hysteresis. (0-15) */ u8 range; /* Temp range, encoded */ s8 critical; /* "All fans ON" temp limit */ - u8 off_desired; /* Actual "off" temperature specified. Preserved + u8 off_desired; /* Actual "off" temperature specified. Preserved * to prevent "drift" as other autofan control * values change. */ - u8 max_desired; /* Actual "max" temperature specified. Preserved + u8 max_desired; /* Actual "max" temperature specified. Preserved * to prevent "drift" as other autofan control * values change. */ @@ -327,23 +298,13 @@ struct lm85_data { s8 temp[3]; /* Register value */ s8 temp_min[3]; /* Register value */ s8 temp_max[3]; /* Register value */ - s8 temp_offset[3]; /* Register value */ u16 fan[4]; /* Register value */ u16 fan_min[4]; /* Register value */ u8 pwm[3]; /* Register value */ - u8 spinup_ctl; /* Register encoding, combined */ - u8 tach_mode; /* Register encoding, combined */ u8 temp_ext[3]; /* Decoded values */ u8 in_ext[8]; /* Decoded values */ - u8 fan_ppr; /* Register value */ - u8 smooth[3]; /* Register encoding */ u8 vid; /* Register value */ u8 vrm; /* VRM version */ - u8 syncpwm3; /* Saved PWM3 for TACH 2,3,4 config */ - u8 oppoint[3]; /* Register value */ - u16 tmin_ctl; /* Register value */ - unsigned long therm_total; /* Cummulative therm count */ - u8 therm_limit; /* Register value */ u32 alarms; /* Register encoding, combined */ struct lm85_autofan autofan[3]; struct lm85_zone zone[3]; @@ -355,9 +316,8 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, static int lm85_detach_client(struct i2c_client *client); static int lm85_read_value(struct i2c_client *client, u8 reg); -static int lm85_write_value(struct i2c_client *client, u8 reg, int value); +static void lm85_write_value(struct i2c_client *client, u8 reg, int value); static struct lm85_data *lm85_update_device(struct device *dev); -static void lm85_init_client(struct i2c_client *client); static struct i2c_driver lm85_driver = { @@ -375,7 +335,7 @@ static ssize_t show_fan(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr]) ); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr])); } static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr, @@ -383,7 +343,7 @@ static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr]) ); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr])); } static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, @@ -414,7 +374,8 @@ show_fan_offset(4); /* vid, vrm, alarms */ -static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, + char *buf) { struct lm85_data *data = lm85_update_device(dev); int vid; @@ -432,13 +393,15 @@ static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, c static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); -static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, + char *buf) { struct lm85_data *data = dev_get_drvdata(dev); return sprintf(buf, "%ld\n", (long) data->vrm); } -static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct lm85_data *data = dev_get_drvdata(dev); data->vrm = simple_strtoul(buf, NULL, 10); @@ -447,7 +410,8 @@ static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); -static ssize_t show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_alarms_reg(struct device *dev, struct device_attribute + *attr, char *buf) { struct lm85_data *data = lm85_update_device(dev); return sprintf(buf, "%u\n", data->alarms); @@ -488,7 +452,7 @@ static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm[nr]) ); + return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr])); } static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, @@ -581,17 +545,16 @@ static ssize_t show_in(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf( buf, "%d\n", INSEXT_FROM_REG(nr, - data->in[nr], - data->in_ext[nr])); + return sprintf(buf, "%d\n", INSEXT_FROM_REG(nr, data->in[nr], + data->in_ext[nr])); } -static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, +static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr]) ); + return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_min[nr])); } static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, @@ -614,7 +577,7 @@ static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr]) ); + return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_max[nr])); } static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, @@ -656,8 +619,8 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMPEXT_FROM_REG(data->temp[nr], - data->temp_ext[nr])); + return sprintf(buf, "%d\n", TEMPEXT_FROM_REG(data->temp[nr], + data->temp_ext[nr])); } static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, @@ -665,7 +628,7 @@ static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr]) ); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr])); } static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, @@ -688,7 +651,7 @@ static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr]) ); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr])); } static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, @@ -697,7 +660,7 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, int nr = to_sensor_dev_attr(attr)->index; struct i2c_client *client = to_i2c_client(dev); struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); + long val = simple_strtol(buf, NULL, 10); mutex_lock(&data->update_lock); data->temp_max[nr] = TEMP_TO_REG(val); @@ -726,7 +689,7 @@ static ssize_t show_pwm_auto_channels(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", ZONE_FROM_REG(data->autofan[nr].config)); + return sprintf(buf, "%d\n", ZONE_FROM_REG(data->autofan[nr].config)); } static ssize_t set_pwm_auto_channels(struct device *dev, @@ -735,11 +698,11 @@ static ssize_t set_pwm_auto_channels(struct device *dev, int nr = to_sensor_dev_attr(attr)->index; struct i2c_client *client = to_i2c_client(dev); struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); + long val = simple_strtol(buf, NULL, 10); mutex_lock(&data->update_lock); data->autofan[nr].config = (data->autofan[nr].config & (~0xe0)) - | ZONE_TO_REG(val) ; + | ZONE_TO_REG(val); lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr), data->autofan[nr].config); mutex_unlock(&data->update_lock); @@ -751,7 +714,7 @@ static ssize_t show_pwm_auto_pwm_min(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm)); + return sprintf(buf, "%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm)); } static ssize_t set_pwm_auto_pwm_min(struct device *dev, @@ -775,7 +738,7 @@ static ssize_t show_pwm_auto_pwm_minctl(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", data->autofan[nr].min_off); + return sprintf(buf, "%d\n", data->autofan[nr].min_off); } static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, @@ -785,15 +748,15 @@ static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, struct i2c_client *client = to_i2c_client(dev); struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); + u8 tmp; mutex_lock(&data->update_lock); data->autofan[nr].min_off = val; - lm85_write_value(client, LM85_REG_AFAN_SPIKE1, data->smooth[0] - | data->syncpwm3 - | (data->autofan[0].min_off ? 0x20 : 0) - | (data->autofan[1].min_off ? 0x40 : 0) - | (data->autofan[2].min_off ? 0x80 : 0) - ); + tmp = lm85_read_value(client, LM85_REG_AFAN_SPIKE1); + tmp &= ~(0x20 << nr); + if (data->autofan[nr].min_off) + tmp |= 0x20 << nr; + lm85_write_value(client, LM85_REG_AFAN_SPIKE1, tmp); mutex_unlock(&data->update_lock); return count; } @@ -803,7 +766,7 @@ static ssize_t show_pwm_auto_pwm_freq(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", FREQ_FROM_REG(data->autofan[nr].freq)); + return sprintf(buf, "%d\n", FREQ_FROM_REG(data->autofan[nr].freq)); } static ssize_t set_pwm_auto_pwm_freq(struct device *dev, @@ -818,8 +781,7 @@ static ssize_t set_pwm_auto_pwm_freq(struct device *dev, data->autofan[nr].freq = FREQ_TO_REG(val); lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), (data->zone[nr].range << 4) - | data->autofan[nr].freq - ); + | data->autofan[nr].freq); mutex_unlock(&data->update_lock); return count; } @@ -849,7 +811,7 @@ static ssize_t show_temp_auto_temp_off(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) - + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit) - HYST_FROM_REG(data->zone[nr].hyst)); } @@ -866,15 +828,13 @@ static ssize_t set_temp_auto_temp_off(struct device *dev, min = TEMP_FROM_REG(data->zone[nr].limit); data->zone[nr].off_desired = TEMP_TO_REG(val); data->zone[nr].hyst = HYST_TO_REG(min - val); - if ( nr == 0 || nr == 1 ) { + if (nr == 0 || nr == 1) { lm85_write_value(client, LM85_REG_AFAN_HYST1, (data->zone[0].hyst << 4) - | data->zone[1].hyst - ); + | data->zone[1].hyst); } else { lm85_write_value(client, LM85_REG_AFAN_HYST2, - (data->zone[2].hyst << 4) - ); + (data->zone[2].hyst << 4)); } mutex_unlock(&data->update_lock); return count; @@ -885,7 +845,7 @@ static ssize_t show_temp_auto_temp_min(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) ); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit)); } static ssize_t set_temp_auto_temp_min(struct device *dev, @@ -913,15 +873,13 @@ static ssize_t set_temp_auto_temp_min(struct device *dev, data->zone[nr].hyst = HYST_TO_REG(TEMP_FROM_REG( data->zone[nr].limit) - TEMP_FROM_REG( data->zone[nr].off_desired)); - if ( nr == 0 || nr == 1 ) { + if (nr == 0 || nr == 1) { lm85_write_value(client, LM85_REG_AFAN_HYST1, (data->zone[0].hyst << 4) - | data->zone[1].hyst - ); + | data->zone[1].hyst); } else { lm85_write_value(client, LM85_REG_AFAN_HYST2, - (data->zone[2].hyst << 4) - ); + (data->zone[2].hyst << 4)); } mutex_unlock(&data->update_lock); return count; @@ -932,7 +890,7 @@ static ssize_t show_temp_auto_temp_max(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) + + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit) + RANGE_FROM_REG(data->zone[nr].range)); } @@ -962,11 +920,11 @@ static ssize_t show_temp_auto_temp_crit(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].critical)); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].critical)); } static ssize_t set_temp_auto_temp_crit(struct device *dev, - struct device_attribute *attr,const char *buf, size_t count) + struct device_attribute *attr, const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct i2c_client *client = to_i2c_client(dev); @@ -1127,20 +1085,37 @@ static const struct attribute_group lm85_group_in567 = { .attrs = lm85_attributes_in567, }; +static void lm85_init_client(struct i2c_client *client) +{ + int value; + + /* Start monitoring if needed */ + value = lm85_read_value(client, LM85_REG_CONFIG); + if (!(value & 0x01)) { + dev_info(&client->dev, "Starting monitoring\n"); + lm85_write_value(client, LM85_REG_CONFIG, value | 0x01); + } + + /* Warn about unusual configuration bits */ + if (value & 0x02) + dev_warn(&client->dev, "Device configuration is locked\n"); + if (!(value & 0x04)) + dev_warn(&client->dev, "Device is not ready\n"); +} + static int lm85_detect(struct i2c_adapter *adapter, int address, int kind) { - int company, verstep ; - struct i2c_client *new_client = NULL; + int company, verstep; + struct i2c_client *client; struct lm85_data *data; int err = 0; - const char *type_name = ""; + const char *type_name; - if (!i2c_check_functionality(adapter, - I2C_FUNC_SMBUS_BYTE_DATA)) { + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { /* We need to be able to do byte I/O */ - goto ERROR0 ; - }; + goto ERROR0; + } /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. @@ -1151,138 +1126,145 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, goto ERROR0; } - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm85_driver; - new_client->flags = 0; + client = &data->client; + i2c_set_clientdata(client, data); + client->addr = address; + client->adapter = adapter; + client->driver = &lm85_driver; /* Now, we do the remaining detection. */ - company = lm85_read_value(new_client, LM85_REG_COMPANY); - verstep = lm85_read_value(new_client, LM85_REG_VERSTEP); + company = lm85_read_value(client, LM85_REG_COMPANY); + verstep = lm85_read_value(client, LM85_REG_VERSTEP); dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with" " COMPANY: 0x%02x and VERSTEP: 0x%02x\n", - i2c_adapter_id(new_client->adapter), new_client->addr, + i2c_adapter_id(client->adapter), client->addr, company, verstep); /* If auto-detecting, Determine the chip type. */ if (kind <= 0) { dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x ...\n", - i2c_adapter_id(adapter), address ); - if( company == LM85_COMPANY_NATIONAL - && verstep == LM85_VERSTEP_LM85C ) { - kind = lm85c ; - } else if( company == LM85_COMPANY_NATIONAL - && verstep == LM85_VERSTEP_LM85B ) { - kind = lm85b ; - } else if( company == LM85_COMPANY_NATIONAL - && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) { + i2c_adapter_id(adapter), address); + if (company == LM85_COMPANY_NATIONAL + && verstep == LM85_VERSTEP_LM85C) { + kind = lm85c; + } else if (company == LM85_COMPANY_NATIONAL + && verstep == LM85_VERSTEP_LM85B) { + kind = lm85b; + } else if (company == LM85_COMPANY_NATIONAL + && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) { dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x" " Defaulting to LM85.\n", verstep); - kind = any_chip ; - } else if( company == LM85_COMPANY_ANALOG_DEV - && verstep == LM85_VERSTEP_ADM1027 ) { - kind = adm1027 ; - } else if( company == LM85_COMPANY_ANALOG_DEV + kind = any_chip; + } else if (company == LM85_COMPANY_ANALOG_DEV + && verstep == LM85_VERSTEP_ADM1027) { + kind = adm1027; + } else if (company == LM85_COMPANY_ANALOG_DEV && (verstep == LM85_VERSTEP_ADT7463 - || verstep == LM85_VERSTEP_ADT7463C) ) { - kind = adt7463 ; - } else if( company == LM85_COMPANY_ANALOG_DEV - && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) { + || verstep == LM85_VERSTEP_ADT7463C)) { + kind = adt7463; + } else if (company == LM85_COMPANY_ANALOG_DEV + && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) { dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x" - " Defaulting to Generic LM85.\n", verstep ); - kind = any_chip ; - } else if( company == LM85_COMPANY_SMSC + " Defaulting to Generic LM85.\n", verstep); + kind = any_chip; + } else if (company == LM85_COMPANY_SMSC && (verstep == LM85_VERSTEP_EMC6D100_A0 - || verstep == LM85_VERSTEP_EMC6D100_A1) ) { + || verstep == LM85_VERSTEP_EMC6D100_A1)) { /* Unfortunately, we can't tell a '100 from a '101 * from the registers. Since a '101 is a '100 * in a package with fewer pins and therefore no * 3.3V, 1.5V or 1.8V inputs, perhaps if those * inputs read 0, then it's a '101. */ - kind = emc6d100 ; - } else if( company == LM85_COMPANY_SMSC + kind = emc6d100; + } else if (company == LM85_COMPANY_SMSC && verstep == LM85_VERSTEP_EMC6D102) { - kind = emc6d102 ; - } else if( company == LM85_COMPANY_SMSC + kind = emc6d102; + } else if (company == LM85_COMPANY_SMSC && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) { dev_err(&adapter->dev, "lm85: Detected SMSC chip\n"); dev_err(&adapter->dev, "lm85: Unrecognized version/stepping 0x%02x" - " Defaulting to Generic LM85.\n", verstep ); - kind = any_chip ; - } else if( kind == any_chip + " Defaulting to Generic LM85.\n", verstep); + kind = any_chip; + } else if (kind == any_chip && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) { dev_err(&adapter->dev, "Generic LM85 Version 6 detected\n"); /* Leave kind as "any_chip" */ } else { dev_dbg(&adapter->dev, "Autodetection failed\n"); - /* Not an LM85 ... */ - if( kind == any_chip ) { /* User used force=x,y */ + /* Not an LM85... */ + if (kind == any_chip) { /* User used force=x,y */ dev_err(&adapter->dev, "Generic LM85 Version 6 not" " found at %d,0x%02x. Try force_lm85c.\n", - i2c_adapter_id(adapter), address ); + i2c_adapter_id(adapter), address); } - err = 0 ; + err = 0; goto ERROR1; } } /* Fill in the chip specific driver values */ - if ( kind == any_chip ) { - type_name = "lm85"; - } else if ( kind == lm85b ) { + switch (kind) { + case lm85b: type_name = "lm85b"; - } else if ( kind == lm85c ) { + break; + case lm85c: type_name = "lm85c"; - } else if ( kind == adm1027 ) { + break; + case adm1027: type_name = "adm1027"; - } else if ( kind == adt7463 ) { + break; + case adt7463: type_name = "adt7463"; - } else if ( kind == emc6d100){ + break; + case emc6d100: type_name = "emc6d100"; - } else if ( kind == emc6d102 ) { + break; + case emc6d102: type_name = "emc6d102"; + break; + default: + type_name = "lm85"; } - strlcpy(new_client->name, type_name, I2C_NAME_SIZE); + strlcpy(client->name, type_name, I2C_NAME_SIZE); /* Fill in the remaining client fields */ data->type = kind; - data->valid = 0; mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) + err = i2c_attach_client(client); + if (err) goto ERROR1; /* Set the VRM version */ data->vrm = vid_which_vrm(); /* Initialize the LM85 chip */ - lm85_init_client(new_client); + lm85_init_client(client); /* Register sysfs hooks */ - if ((err = sysfs_create_group(&new_client->dev.kobj, &lm85_group))) + err = sysfs_create_group(&client->dev.kobj, &lm85_group); + if (err) goto ERROR2; /* The ADT7463 has an optional VRM 10 mode where pin 21 is used as a sixth digital VID input rather than an analog input. */ - data->vid = lm85_read_value(new_client, LM85_REG_VID); + data->vid = lm85_read_value(client, LM85_REG_VID); if (!(kind == adt7463 && (data->vid & 0x80))) - if ((err = sysfs_create_group(&new_client->dev.kobj, + if ((err = sysfs_create_group(&client->dev.kobj, &lm85_group_in4))) goto ERROR3; /* The EMC6D100 has 3 additional voltage inputs */ if (kind == emc6d100) - if ((err = sysfs_create_group(&new_client->dev.kobj, + if ((err = sysfs_create_group(&client->dev.kobj, &lm85_group_in567))) goto ERROR3; - data->hwmon_dev = hwmon_device_register(&new_client->dev); + data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); goto ERROR3; @@ -1291,16 +1273,16 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, return 0; /* Error out and cleanup code */ - ERROR3: - sysfs_remove_group(&new_client->dev.kobj, &lm85_group); - sysfs_remove_group(&new_client->dev.kobj, &lm85_group_in4); + ERROR3: + sysfs_remove_group(&client->dev.kobj, &lm85_group); + sysfs_remove_group(&client->dev.kobj, &lm85_group_in4); if (kind == emc6d100) - sysfs_remove_group(&new_client->dev.kobj, &lm85_group_in567); - ERROR2: - i2c_detach_client(new_client); - ERROR1: + sysfs_remove_group(&client->dev.kobj, &lm85_group_in567); + ERROR2: + i2c_detach_client(client); + ERROR1: kfree(data); - ERROR0: + ERROR0: return err; } @@ -1323,100 +1305,46 @@ static int lm85_read_value(struct i2c_client *client, u8 reg) int res; /* What size location is it? */ - switch( reg ) { - case LM85_REG_FAN(0) : /* Read WORD data */ - case LM85_REG_FAN(1) : - case LM85_REG_FAN(2) : - case LM85_REG_FAN(3) : - case LM85_REG_FAN_MIN(0) : - case LM85_REG_FAN_MIN(1) : - case LM85_REG_FAN_MIN(2) : - case LM85_REG_FAN_MIN(3) : - case LM85_REG_ALARM1 : /* Read both bytes at once */ - res = i2c_smbus_read_byte_data(client, reg) & 0xff ; - res |= i2c_smbus_read_byte_data(client, reg+1) << 8 ; - break ; - case ADT7463_REG_TMIN_CTL1 : /* Read WORD MSB, LSB */ - res = i2c_smbus_read_byte_data(client, reg) << 8 ; - res |= i2c_smbus_read_byte_data(client, reg+1) & 0xff ; - break ; + switch (reg) { + case LM85_REG_FAN(0): /* Read WORD data */ + case LM85_REG_FAN(1): + case LM85_REG_FAN(2): + case LM85_REG_FAN(3): + case LM85_REG_FAN_MIN(0): + case LM85_REG_FAN_MIN(1): + case LM85_REG_FAN_MIN(2): + case LM85_REG_FAN_MIN(3): + case LM85_REG_ALARM1: /* Read both bytes at once */ + res = i2c_smbus_read_byte_data(client, reg) & 0xff; + res |= i2c_smbus_read_byte_data(client, reg + 1) << 8; + break; default: /* Read BYTE data */ res = i2c_smbus_read_byte_data(client, reg); - break ; + break; } - return res ; + return res; } -static int lm85_write_value(struct i2c_client *client, u8 reg, int value) +static void lm85_write_value(struct i2c_client *client, u8 reg, int value) { - int res ; - - switch( reg ) { - case LM85_REG_FAN(0) : /* Write WORD data */ - case LM85_REG_FAN(1) : - case LM85_REG_FAN(2) : - case LM85_REG_FAN(3) : - case LM85_REG_FAN_MIN(0) : - case LM85_REG_FAN_MIN(1) : - case LM85_REG_FAN_MIN(2) : - case LM85_REG_FAN_MIN(3) : + switch (reg) { + case LM85_REG_FAN(0): /* Write WORD data */ + case LM85_REG_FAN(1): + case LM85_REG_FAN(2): + case LM85_REG_FAN(3): + case LM85_REG_FAN_MIN(0): + case LM85_REG_FAN_MIN(1): + case LM85_REG_FAN_MIN(2): + case LM85_REG_FAN_MIN(3): /* NOTE: ALARM is read only, so not included here */ - res = i2c_smbus_write_byte_data(client, reg, value & 0xff) ; - res |= i2c_smbus_write_byte_data(client, reg+1, (value>>8) & 0xff) ; - break ; - case ADT7463_REG_TMIN_CTL1 : /* Write WORD MSB, LSB */ - res = i2c_smbus_write_byte_data(client, reg, (value>>8) & 0xff); - res |= i2c_smbus_write_byte_data(client, reg+1, value & 0xff) ; - break ; + i2c_smbus_write_byte_data(client, reg, value & 0xff); + i2c_smbus_write_byte_data(client, reg + 1, value >> 8); + break; default: /* Write BYTE data */ - res = i2c_smbus_write_byte_data(client, reg, value); - break ; + i2c_smbus_write_byte_data(client, reg, value); + break; } - - return res ; -} - -static void lm85_init_client(struct i2c_client *client) -{ - int value; - struct lm85_data *data = i2c_get_clientdata(client); - - dev_dbg(&client->dev, "Initializing device\n"); - - /* Warn if part was not "READY" */ - value = lm85_read_value(client, LM85_REG_CONFIG); - dev_dbg(&client->dev, "LM85_REG_CONFIG is: 0x%02x\n", value); - if( value & 0x02 ) { - dev_err(&client->dev, "Client (%d,0x%02x) config is locked.\n", - i2c_adapter_id(client->adapter), client->addr ); - }; - if( ! (value & 0x04) ) { - dev_err(&client->dev, "Client (%d,0x%02x) is not ready.\n", - i2c_adapter_id(client->adapter), client->addr ); - }; - if( value & 0x10 - && ( data->type == adm1027 - || data->type == adt7463 ) ) { - dev_err(&client->dev, "Client (%d,0x%02x) VxI mode is set. " - "Please report this to the lm85 maintainer.\n", - i2c_adapter_id(client->adapter), client->addr ); - }; - - /* WE INTENTIONALLY make no changes to the limits, - * offsets, pwms, fans and zones. If they were - * configured, we don't want to mess with them. - * If they weren't, the default is 100% PWM, no - * control and will suffice until 'sensors -s' - * can be run by the user. - */ - - /* Start monitoring */ - value = lm85_read_value(client, LM85_REG_CONFIG); - /* Try to clear LOCK, Set START, save everything else */ - value = (value & ~ 0x02) | 0x01 ; - dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value); - lm85_write_value(client, LM85_REG_CONFIG, value); } static struct lm85_data *lm85_update_device(struct device *dev) @@ -1427,28 +1355,30 @@ static struct lm85_data *lm85_update_device(struct device *dev) mutex_lock(&data->update_lock); - if ( !data->valid || - time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL) ) { + if (!data->valid || + time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL)) { /* Things that change quickly */ dev_dbg(&client->dev, "Reading sensor values\n"); - + /* Have to read extended bits first to "freeze" the * more significant bits that are read later. * There are 2 additional resolution bits per channel and we * have room for 4, so we shift them to the left. */ - if ( (data->type == adm1027) || (data->type == adt7463) ) { + if (data->type == adm1027 || data->type == adt7463) { int ext1 = lm85_read_value(client, ADM1027_REG_EXTEND_ADC1); int ext2 = lm85_read_value(client, ADM1027_REG_EXTEND_ADC2); int val = (ext1 << 8) + ext2; - for(i = 0; i <= 4; i++) - data->in_ext[i] = ((val>>(i * 2))&0x03) << 2; + for (i = 0; i <= 4; i++) + data->in_ext[i] = + ((val >> (i * 2)) & 0x03) << 2; - for(i = 0; i <= 2; i++) - data->temp_ext[i] = (val>>((i + 4) * 2))&0x0c; + for (i = 0; i <= 2; i++) + data->temp_ext[i] = + (val >> ((i + 4) * 2)) & 0x0c; } data->vid = lm85_read_value(client, LM85_REG_VID); @@ -1456,6 +1386,8 @@ static struct lm85_data *lm85_update_device(struct device *dev) for (i = 0; i <= 3; ++i) { data->in[i] = lm85_read_value(client, LM85_REG_IN(i)); + data->fan[i] = + lm85_read_value(client, LM85_REG_FAN(i)); } if (!(data->type == adt7463 && (data->vid & 0x80))) { @@ -1463,38 +1395,25 @@ static struct lm85_data *lm85_update_device(struct device *dev) LM85_REG_IN(4)); } - for (i = 0; i <= 3; ++i) { - data->fan[i] = - lm85_read_value(client, LM85_REG_FAN(i)); - } - for (i = 0; i <= 2; ++i) { data->temp[i] = lm85_read_value(client, LM85_REG_TEMP(i)); - } - - for (i = 0; i <= 2; ++i) { data->pwm[i] = lm85_read_value(client, LM85_REG_PWM(i)); } data->alarms = lm85_read_value(client, LM85_REG_ALARM1); - if ( data->type == adt7463 ) { - if( data->therm_total < ULONG_MAX - 256 ) { - data->therm_total += - lm85_read_value(client, ADT7463_REG_THERM ); - } - } else if ( data->type == emc6d100 ) { + if (data->type == emc6d100) { /* Three more voltage sensors */ for (i = 5; i <= 7; ++i) { - data->in[i] = - lm85_read_value(client, EMC6D100_REG_IN(i)); + data->in[i] = lm85_read_value(client, + EMC6D100_REG_IN(i)); } /* More alarm bits */ - data->alarms |= - lm85_read_value(client, EMC6D100_REG_ALARM3) << 16; - } else if (data->type == emc6d102 ) { + data->alarms |= lm85_read_value(client, + EMC6D100_REG_ALARM3) << 16; + } else if (data->type == emc6d102) { /* Have to read LSB bits after the MSB ones because the reading of the MSB bits has frozen the LSBs (backward from the ADM1027). @@ -1509,20 +1428,20 @@ static struct lm85_data *lm85_update_device(struct device *dev) EMC6D102_REG_EXTEND_ADC4); data->in_ext[0] = ext3 & 0x0f; data->in_ext[1] = ext4 & 0x0f; - data->in_ext[2] = (ext4 >> 4) & 0x0f; - data->in_ext[3] = (ext3 >> 4) & 0x0f; - data->in_ext[4] = (ext2 >> 4) & 0x0f; + data->in_ext[2] = ext4 >> 4; + data->in_ext[3] = ext3 >> 4; + data->in_ext[4] = ext2 >> 4; data->temp_ext[0] = ext1 & 0x0f; data->temp_ext[1] = ext2 & 0x0f; - data->temp_ext[2] = (ext1 >> 4) & 0x0f; + data->temp_ext[2] = ext1 >> 4; } - data->last_reading = jiffies ; - }; /* last_reading */ + data->last_reading = jiffies; + } /* last_reading */ - if ( !data->valid || - time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL) ) { + if (!data->valid || + time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL)) { /* Things that don't change often */ dev_dbg(&client->dev, "Reading config values\n"); @@ -1531,6 +1450,8 @@ static struct lm85_data *lm85_update_device(struct device *dev) lm85_read_value(client, LM85_REG_IN_MIN(i)); data->in_max[i] = lm85_read_value(client, LM85_REG_IN_MAX(i)); + data->fan_min[i] = + lm85_read_value(client, LM85_REG_FAN_MIN(i)); } if (!(data->type == adt7463 && (data->vid & 0x80))) { @@ -1540,34 +1461,28 @@ static struct lm85_data *lm85_update_device(struct device *dev) LM85_REG_IN_MAX(4)); } - if ( data->type == emc6d100 ) { + if (data->type == emc6d100) { for (i = 5; i <= 7; ++i) { - data->in_min[i] = - lm85_read_value(client, EMC6D100_REG_IN_MIN(i)); - data->in_max[i] = - lm85_read_value(client, EMC6D100_REG_IN_MAX(i)); + data->in_min[i] = lm85_read_value(client, + EMC6D100_REG_IN_MIN(i)); + data->in_max[i] = lm85_read_value(client, + EMC6D100_REG_IN_MAX(i)); } } - for (i = 0; i <= 3; ++i) { - data->fan_min[i] = - lm85_read_value(client, LM85_REG_FAN_MIN(i)); - } - for (i = 0; i <= 2; ++i) { + int val; + data->temp_min[i] = lm85_read_value(client, LM85_REG_TEMP_MIN(i)); data->temp_max[i] = lm85_read_value(client, LM85_REG_TEMP_MAX(i)); - } - for (i = 0; i <= 2; ++i) { - int val ; data->autofan[i].config = lm85_read_value(client, LM85_REG_AFAN_CONFIG(i)); val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i)); - data->autofan[i].freq = val & 0x07 ; - data->zone[i].range = (val >> 4) & 0x0f ; + data->autofan[i].freq = val & 0x07; + data->zone[i].range = val >> 4; data->autofan[i].min_pwm = lm85_read_value(client, LM85_REG_AFAN_MINPWM(i)); data->zone[i].limit = @@ -1577,50 +1492,19 @@ static struct lm85_data *lm85_update_device(struct device *dev) } i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1); - data->smooth[0] = i & 0x0f ; - data->syncpwm3 = i & 0x10 ; /* Save PWM3 config */ - data->autofan[0].min_off = (i & 0x20) != 0 ; - data->autofan[1].min_off = (i & 0x40) != 0 ; - data->autofan[2].min_off = (i & 0x80) != 0 ; - i = lm85_read_value(client, LM85_REG_AFAN_SPIKE2); - data->smooth[1] = (i>>4) & 0x0f ; - data->smooth[2] = i & 0x0f ; + data->autofan[0].min_off = (i & 0x20) != 0; + data->autofan[1].min_off = (i & 0x40) != 0; + data->autofan[2].min_off = (i & 0x80) != 0; i = lm85_read_value(client, LM85_REG_AFAN_HYST1); - data->zone[0].hyst = (i>>4) & 0x0f ; - data->zone[1].hyst = i & 0x0f ; + data->zone[0].hyst = i >> 4; + data->zone[1].hyst = i & 0x0f; i = lm85_read_value(client, LM85_REG_AFAN_HYST2); - data->zone[2].hyst = (i>>4) & 0x0f ; - - if ( (data->type == lm85b) || (data->type == lm85c) ) { - data->tach_mode = lm85_read_value(client, - LM85_REG_TACH_MODE ); - data->spinup_ctl = lm85_read_value(client, - LM85_REG_SPINUP_CTL ); - } else if ( (data->type == adt7463) || (data->type == adm1027) ) { - if ( data->type == adt7463 ) { - for (i = 0; i <= 2; ++i) { - data->oppoint[i] = lm85_read_value(client, - ADT7463_REG_OPPOINT(i) ); - } - data->tmin_ctl = lm85_read_value(client, - ADT7463_REG_TMIN_CTL1 ); - data->therm_limit = lm85_read_value(client, - ADT7463_REG_THERM_LIMIT ); - } - for (i = 0; i <= 2; ++i) { - data->temp_offset[i] = lm85_read_value(client, - ADM1027_REG_TEMP_OFFSET(i) ); - } - data->tach_mode = lm85_read_value(client, - ADM1027_REG_CONFIG3 ); - data->fan_ppr = lm85_read_value(client, - ADM1027_REG_FAN_PPR ); - } - + data->zone[2].hyst = i >> 4; + data->last_config = jiffies; - }; /* last_config */ + } /* last_config */ data->valid = 1; @@ -1635,17 +1519,15 @@ static int __init sm_lm85_init(void) return i2c_add_driver(&lm85_driver); } -static void __exit sm_lm85_exit(void) +static void __exit sm_lm85_exit(void) { i2c_del_driver(&lm85_driver); } -/* Thanks to Richard Barrington for adding the LM85 to sensors-detect. - * Thanks to Margit Schubert-While for help with - * post 2.7.0 CVS changes. - */ MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Philip Pokorny , Margit Schubert-While , Justin Thiessen , " + "Margit Schubert-While , " + "Justin Thiessen "); MODULE_DESCRIPTION("LM85-B, LM85-C driver"); module_init(sm_lm85_init);