X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fhwmon%2FKconfig;h=368879ff5d8c5642250c9a9db9962dcff45aa83e;hb=cdd0972945dbcb8ea24db365d9b0e100af2a27bb;hp=192953b29b2843e243d41102b7367d5181c2d7a4;hpb=53fdc5185c994ad6def3729a905ac4a47c477c9d;p=linux-2.6 diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 192953b29b..368879ff5d 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -30,7 +30,7 @@ config HWMON_VID config SENSORS_ABITUGURU tristate "Abit uGuru (rev 1 & 2)" - depends on EXPERIMENTAL + depends on X86 && EXPERIMENTAL help If you say yes here you get support for the sensor part of the first and second revision of the Abit uGuru chip. The voltage and frequency @@ -45,7 +45,7 @@ config SENSORS_ABITUGURU config SENSORS_ABITUGURU3 tristate "Abit uGuru (rev 3)" - depends on HWMON && EXPERIMENTAL + depends on X86 && EXPERIMENTAL help If you say yes here you get support for the sensor part of the third revision of the Abit uGuru chip. Only reading the sensors @@ -133,6 +133,26 @@ config SENSORS_ADM9240 This driver can also be built as a module. If so, the module will be called adm9240. +config SENSORS_ADT7470 + tristate "Analog Devices ADT7470" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + ADT7470 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7470. + +config SENSORS_ADT7473 + tristate "Analog Devices ADT7473" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + ADT7473 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7473. + config SENSORS_K8TEMP tristate "AMD Athlon64/FX or Opteron temperature sensor" depends on X86 && PCI && EXPERIMENTAL @@ -148,6 +168,7 @@ config SENSORS_K8TEMP config SENSORS_AMS tristate "Apple Motion Sensor driver" depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL + select INPUT_POLLDEV help Support for the motion sensor included in PowerBooks. Includes implementations for PMU and I2C. @@ -172,7 +193,7 @@ config SENSORS_AMS_I2C config SENSORS_ASB100 tristate "Asus ASB100 Bach" - depends on I2C && EXPERIMENTAL + depends on X86 && I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the ASB100 Bach sensor @@ -205,20 +226,50 @@ config SENSORS_DS1621 This driver can also be built as a module. If so, the module will be called ds1621. +config SENSORS_I5K_AMB + tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" + depends on PCI && EXPERIMENTAL + help + If you say yes here you get support for FB-DIMM AMB temperature + monitoring chips on systems with the Intel 5000 series chipset. + + This driver can also be built as a module. If so, the module + will be called i5k_amb. + config SENSORS_F71805F - tristate "Fintek F71805F/FG and F71872F/FG" + tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" depends on EXPERIMENTAL help If you say yes here you get support for hardware monitoring - features of the Fintek F71805F/FG and F71872F/FG Super-I/O - chips. + features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG + Super-I/O chips. This driver can also be built as a module. If so, the module will be called f71805f. +config SENSORS_F71882FG + tristate "Fintek F71882FG and F71883FG" + depends on EXPERIMENTAL + help + If you say yes here you get support for hardware monitoring + features of the Fintek F71882FG and F71883FG Super-I/O chips. + + This driver can also be built as a module. If so, the module + will be called f71882fg. + +config SENSORS_F75375S + tristate "Fintek F75375S/SP and F75373"; + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for hardware monitoring + features of the Fintek F75375S/SP and F75373 + + This driver can also be built as a module. If so, the module + will be called f75375s. + config SENSORS_FSCHER tristate "FSC Hermes" - depends on I2C + depends on X86 && I2C help If you say yes here you get support for Fujitsu Siemens Computers Hermes sensor chips. @@ -228,7 +279,7 @@ config SENSORS_FSCHER config SENSORS_FSCPOS tristate "FSC Poseidon" - depends on I2C + depends on X86 && I2C help If you say yes here you get support for Fujitsu Siemens Computers Poseidon sensor chips. @@ -236,6 +287,20 @@ config SENSORS_FSCPOS This driver can also be built as a module. If so, the module will be called fscpos. +config SENSORS_FSCHMD + tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles" + depends on X86 && I2C && EXPERIMENTAL + help + If you say yes here you get support for various Fujitsu Siemens + Computers sensor chips. + + This is a new merged driver for FSC sensor chips which is intended + as a replacment for the fscpos, fscscy and fscher drivers and adds + support for several other FCS sensor chips. + + This driver can also be built as a module. If so, the module + will be called fschmd. + config SENSORS_GL518SM tristate "Genesys Logic GL518SM" depends on I2C @@ -265,6 +330,19 @@ config SENSORS_CORETEMP sensor inside your CPU. Supported all are all known variants of Intel Core family. +config SENSORS_IBMPEX + tristate "IBM PowerExecutive temperature/power sensors" + select IPMI_SI + depends on IPMI_HANDLER + help + If you say yes here you get support for the temperature and + power sensors in various IBM System X servers that support + PowerExecutive. So far this includes the x3550, x3650, x3655, + x3755, and certain HS20 blades. + + This driver can also be built as a module. If so, the module + will be called ibmpex. + config SENSORS_IT87 tristate "ITE IT87xx and compatibles" select HWMON_VID @@ -365,12 +443,12 @@ config SENSORS_LM85 will be called lm85. config SENSORS_LM87 - tristate "National Semiconductor LM87" + tristate "National Semiconductor LM87 and compatibles" depends on I2C select HWMON_VID help If you say yes here you get support for National Semiconductor LM87 - sensor chips. + and Analog Devices ADM1024 sensor chips. This driver can also be built as a module. If so, the module will be called lm87. @@ -401,7 +479,7 @@ config SENSORS_LM92 config SENSORS_LM93 tristate "National Semiconductor LM93 and compatibles" - depends on HWMON && I2C + depends on I2C select HWMON_VID help If you say yes here you get support for National Semiconductor LM93 @@ -466,13 +544,13 @@ config SENSORS_SIS5595 will be called sis5595. config SENSORS_DME1737 - tristate "SMSC DME1737 and compatibles" + tristate "SMSC DME1737, SCH311x and compatibles" depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the hardware monitoring and fan control features of the SMSC DME1737 (and compatibles - like the Asus A8000) Super-I/O chip. + like the Asus A8000) and SCH311x Super-I/O chips. This driver can also be built as a module. If so, the module will be called dme1737. @@ -520,6 +598,16 @@ config SENSORS_SMSC47B397 This driver can also be built as a module. If so, the module will be called smsc47b397. +config SENSORS_ADS7828 + tristate "Texas Instruments ADS7828" + depends on I2C + help + If you say yes here you get support for Texas Instruments ADS7828 + 12-bit 8-channel ADC device. + + This driver can also be built as a module. If so, the module + will be called ads7828. + config SENSORS_THMC50 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" depends on I2C && EXPERIMENTAL @@ -563,13 +651,13 @@ config SENSORS_VT8231 will be called vt8231. config SENSORS_W83781D - tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F" + tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" depends on I2C select HWMON_VID help If you say yes here you get support for the Winbond W8378x series - of sensor chips: the W83781D, W83782D, W83783S and W83627HF, - and the similar Asus AS99127F. + of sensor chips: the W83781D, W83782D and W83783S, and the similar + Asus AS99127F. This driver can also be built as a module. If so, the module will be called w83781d. @@ -615,6 +703,16 @@ config SENSORS_W83L785TS This driver can also be built as a module. If so, the module will be called w83l785ts. +config SENSORS_W83L786NG + tristate "Winbond W83L786NG, W83L786NR" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Winbond W83L786NG + and W83L786NR sensor chips. + + This driver can also be built as a module. If so, the module + will be called w83l786ng. + config SENSORS_W83627HF tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" select HWMON_VID @@ -644,6 +742,7 @@ config SENSORS_W83627EHF config SENSORS_HDAPS tristate "IBM Hard Drive Active Protection System (hdaps)" depends on INPUT && X86 + select INPUT_POLLDEV default n help This driver provides support for the IBM Hard Drive Active Protection @@ -665,6 +764,7 @@ config SENSORS_APPLESMC depends on INPUT && X86 select NEW_LEDS select LEDS_CLASS + select INPUT_POLLDEV default n help This driver provides support for the Apple System Management