X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fchar%2Fxilinx_hwicap%2Fxilinx_hwicap.h;h=24d0d9b938fb39e485c56d9e74d1d9ff6effa5e6;hb=d26acd92fa990764b72608a68224f46fac377032;hp=ae771cac16298b1c675e3f9de902880898e75a78;hpb=6585b4a71f523485ecf33e7f4569be4095d63699;p=linux-2.6

diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
index ae771cac16..24d0d9b938 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -38,7 +38,6 @@
 
 #include <linux/types.h>
 #include <linux/cdev.h>
-#include <linux/version.h>
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
@@ -48,9 +47,9 @@ struct hwicap_drvdata {
 	u8 write_buffer[4];
 	u32 read_buffer_in_use;	  /* Always in [0,3] */
 	u8 read_buffer[4];
-	u32 mem_start;		  /* phys. address of the control registers */
-	u32 mem_end;		  /* phys. address of the control registers */
-	u32 mem_size;
+	resource_size_t mem_start;/* phys. address of the control registers */
+	resource_size_t mem_end;  /* phys. address of the control registers */
+	resource_size_t mem_size;
 	void __iomem *base_address;/* virt. address of the control registers */
 
 	struct device *dev;
@@ -61,14 +60,31 @@ struct hwicap_drvdata {
 	const struct config_registers *config_regs;
 	void *private_data;
 	bool is_open;
-	struct semaphore sem;
+	struct mutex sem;
 };
 
 struct hwicap_driver_config {
+	/* Read configuration data given by size into the data buffer.
+	   Return 0 if successful. */
 	int (*get_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
 			u32 size);
+	/* Write configuration data given by size from the data buffer.
+	   Return 0 if successful. */
 	int (*set_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
 			u32 size);
+	/* Get the status register, bit pattern given by:
+	 * D8 - 0 = configuration error
+	 * D7 - 1 = alignment found
+	 * D6 - 1 = readback in progress
+	 * D5 - 0 = abort in progress
+	 * D4 - Always 1
+	 * D3 - Always 1
+	 * D2 - Always 1
+	 * D1 - Always 1
+	 * D0 - 1 = operation completed
+	 */
+	u32 (*get_status)(struct hwicap_drvdata *drvdata);
+	/* Reset the hw */
 	void (*reset)(struct hwicap_drvdata *drvdata);
 };
 
@@ -163,30 +179,37 @@ struct config_registers {
 /* Constant to use for CRC check when CRC has been disabled */
 #define XHI_DISABLED_AUTO_CRC       0x0000DEFCUL
 
+/* Meanings of the bits returned by get_status */
+#define XHI_SR_CFGERR_N_MASK 0x00000100 /* Config Error Mask */
+#define XHI_SR_DALIGN_MASK 0x00000080 /* Data Alignment Mask */
+#define XHI_SR_RIP_MASK 0x00000040 /* Read back Mask */
+#define XHI_SR_IN_ABORT_N_MASK 0x00000020 /* Select Map Abort Mask */
+#define XHI_SR_DONE_MASK 0x00000001 /* Done bit Mask  */
+
 /**
- * hwicap_type_1_read: Generates a Type 1 read packet header.
- * @parameter: Register is the address of the register to be read back.
+ * hwicap_type_1_read - Generates a Type 1 read packet header.
+ * @reg: is the address of the register to be read back.
  *
  * Generates a Type 1 read packet header, which is used to indirectly
  * read registers in the configuration logic.  This packet must then
  * be sent through the icap device, and a return packet received with
  * the information.
  **/
-static inline u32 hwicap_type_1_read(u32 Register)
+static inline u32 hwicap_type_1_read(u32 reg)
 {
 	return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
-		(Register << XHI_REGISTER_SHIFT) |
+		(reg << XHI_REGISTER_SHIFT) |
 		(XHI_OP_READ << XHI_OP_SHIFT);
 }
 
 /**
- * hwicap_type_1_write: Generates a Type 1 write packet header
- * @parameter: Register is the address of the register to be read back.
+ * hwicap_type_1_write - Generates a Type 1 write packet header
+ * @reg: is the address of the register to be read back.
  **/
-static inline u32 hwicap_type_1_write(u32 Register)
+static inline u32 hwicap_type_1_write(u32 reg)
 {
 	return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
-		(Register << XHI_REGISTER_SHIFT) |
+		(reg << XHI_REGISTER_SHIFT) |
 		(XHI_OP_WRITE << XHI_OP_SHIFT);
 }