X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fchar%2Fsynclinkmp.c;h=bec54866e0bb6630b0f6d05f7890daf365695134;hb=2a5f2e3e6cd1ce9fb3f8b186b6bc9aa1f1497a92;hp=f3e7807f78d98781d903ea8075a970e18c881033;hpb=dd07a8db7283f52f347aee468007556944b5b393;p=linux-2.6 diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c index f3e7807f78..bec54866e0 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/char/synclinkmp.c @@ -188,9 +188,9 @@ typedef struct _synclinkmp_info { u32 pending_bh; - int bh_running; /* Protection from multiple */ + bool bh_running; /* Protection from multiple */ int isr_overflow; - int bh_requested; + bool bh_requested; int dcd_chkcount; /* check counts to prevent */ int cts_chkcount; /* too many IRQs if a signal */ @@ -213,11 +213,11 @@ typedef struct _synclinkmp_info { unsigned char *tmp_rx_buf; unsigned int tmp_rx_buf_count; - int rx_enabled; - int rx_overflow; + bool rx_enabled; + bool rx_overflow; - int tx_enabled; - int tx_active; + bool tx_enabled; + bool tx_active; u32 idle_mode; unsigned char ie0_value; @@ -238,13 +238,13 @@ typedef struct _synclinkmp_info { unsigned int irq_level; /* interrupt level */ unsigned long irq_flags; - int irq_requested; /* nonzero if IRQ requested */ + bool irq_requested; /* true if IRQ requested */ MGSL_PARAMS params; /* communications parameters */ unsigned char serial_signals; /* current serial signal states */ - int irq_occurred; /* for diagnostics use */ + bool irq_occurred; /* for diagnostics use */ unsigned int init_error; /* Initialization startup error */ u32 last_mem_alloc; @@ -255,7 +255,7 @@ typedef struct _synclinkmp_info { unsigned char* sca_base; /* HD64570 SCA Memory address */ u32 phys_sca_base; u32 sca_offset; - int sca_base_requested; + bool sca_base_requested; unsigned char* lcr_base; /* local config registers (PCI only) */ u32 phys_lcr_base; @@ -265,12 +265,12 @@ typedef struct _synclinkmp_info { unsigned char* statctrl_base; /* status/control register memory */ u32 phys_statctrl_base; u32 statctrl_offset; - int sca_statctrl_requested; + bool sca_statctrl_requested; u32 misc_ctrl_value; char flag_buf[MAX_ASYNC_BUFFER_SIZE]; char char_buf[MAX_ASYNC_BUFFER_SIZE]; - BOOLEAN drop_rts_on_tx_done; + bool drop_rts_on_tx_done; struct _input_signal_events input_signal_events; @@ -519,7 +519,7 @@ static void hangup(struct tty_struct *tty); static void set_termios(struct tty_struct *tty, struct ktermios *old_termios); static int write(struct tty_struct *tty, const unsigned char *buf, int count); -static void put_char(struct tty_struct *tty, unsigned char ch); +static int put_char(struct tty_struct *tty, unsigned char ch); static void send_xchar(struct tty_struct *tty, char ch); static void wait_until_sent(struct tty_struct *tty, int timeout); static int write_room(struct tty_struct *tty); @@ -571,12 +571,12 @@ static void shutdown(SLMP_INFO *info); static void program_hw(SLMP_INFO *info); static void change_params(SLMP_INFO *info); -static int init_adapter(SLMP_INFO *info); -static int register_test(SLMP_INFO *info); -static int irq_test(SLMP_INFO *info); -static int loopback_test(SLMP_INFO *info); +static bool init_adapter(SLMP_INFO *info); +static bool register_test(SLMP_INFO *info); +static bool irq_test(SLMP_INFO *info); +static bool loopback_test(SLMP_INFO *info); static int adapter_test(SLMP_INFO *info); -static int memory_test(SLMP_INFO *info); +static bool memory_test(SLMP_INFO *info); static void reset_adapter(SLMP_INFO *info); static void reset_port(SLMP_INFO *info); @@ -587,7 +587,7 @@ static void rx_stop(SLMP_INFO *info); static void rx_start(SLMP_INFO *info); static void rx_reset_buffers(SLMP_INFO *info); static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last); -static int rx_get_frame(SLMP_INFO *info); +static bool rx_get_frame(SLMP_INFO *info); static void tx_start(SLMP_INFO *info); static void tx_stop(SLMP_INFO *info); @@ -862,8 +862,7 @@ static void close(struct tty_struct *tty, struct file *filp) if (info->flags & ASYNC_INITIALIZED) wait_until_sent(tty, info->timeout); - if (tty->driver->flush_buffer) - tty->driver->flush_buffer(tty); + flush_buffer(tty); tty_ldisc_flush(tty); @@ -1046,10 +1045,11 @@ cleanup: /* Add a character to the transmit buffer. */ -static void put_char(struct tty_struct *tty, unsigned char ch) +static int put_char(struct tty_struct *tty, unsigned char ch) { SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; unsigned long flags; + int ret = 0; if ( debug_level >= DEBUG_LEVEL_INFO ) { printk( "%s(%d):%s put_char(%d)\n", @@ -1057,10 +1057,10 @@ static void put_char(struct tty_struct *tty, unsigned char ch) } if (sanity_check(info, tty->name, "put_char")) - return; + return 0; if (!info->tx_buf) - return; + return 0; spin_lock_irqsave(&info->lock,flags); @@ -1072,10 +1072,12 @@ static void put_char(struct tty_struct *tty, unsigned char ch) if (info->tx_put >= info->max_frame_size) info->tx_put -= info->max_frame_size; info->tx_count++; + ret = 1; } } spin_unlock_irqrestore(&info->lock,flags); + return ret; } /* Send a high-priority XON/XOFF character @@ -1119,6 +1121,8 @@ static void wait_until_sent(struct tty_struct *tty, int timeout) if (sanity_check(info, tty->name, "wait_until_sent")) return; + lock_kernel(); + if (!(info->flags & ASYNC_INITIALIZED)) goto exit; @@ -1161,6 +1165,7 @@ static void wait_until_sent(struct tty_struct *tty, int timeout) } exit: + unlock_kernel(); if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s wait_until_sent() exit\n", __FILE__,__LINE__, info->device_name ); @@ -1176,6 +1181,7 @@ static int write_room(struct tty_struct *tty) if (sanity_check(info, tty->name, "write_room")) return 0; + lock_kernel(); if (info->params.mode == MGSL_MODE_HDLC) { ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE; } else { @@ -1183,6 +1189,7 @@ static int write_room(struct tty_struct *tty) if (ret < 0) ret = 0; } + unlock_kernel(); if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s write_room()=%d\n", @@ -1303,7 +1310,7 @@ static void tx_release(struct tty_struct *tty) * * Return Value: 0 if success, otherwise error code */ -static int ioctl(struct tty_struct *tty, struct file *file, +static int do_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; @@ -1393,6 +1400,16 @@ static int ioctl(struct tty_struct *tty, struct file *file, return 0; } +static int ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + int ret; + lock_kernel(); + ret = do_ioctl(tty, file, cmd, arg); + unlock_kernel(); + return ret; +} + /* * /proc fs routines.... */ @@ -1473,7 +1490,7 @@ static inline int line_info(char *buf, SLMP_INFO *info) /* Called to print information about devices */ -int read_proc(char *page, char **start, off_t off, int count, +static int read_proc(char *page, char **start, off_t off, int count, int *eof, void *data) { int len = 0, l; @@ -2024,7 +2041,7 @@ static void hdlcdev_exit(SLMP_INFO *info) /* Return next bottom half action to perform. * Return Value: BH action code or 0 if nothing to do. */ -int bh_action(SLMP_INFO *info) +static int bh_action(SLMP_INFO *info) { unsigned long flags; int rc = 0; @@ -2044,8 +2061,8 @@ int bh_action(SLMP_INFO *info) if (!rc) { /* Mark BH routine as complete */ - info->bh_running = 0; - info->bh_requested = 0; + info->bh_running = false; + info->bh_requested = false; } spin_unlock_irqrestore(&info->lock,flags); @@ -2055,7 +2072,7 @@ int bh_action(SLMP_INFO *info) /* Perform bottom half processing of work items queued by ISR. */ -void bh_handler(struct work_struct *work) +static void bh_handler(struct work_struct *work) { SLMP_INFO *info = container_of(work, SLMP_INFO, task); int action; @@ -2067,7 +2084,7 @@ void bh_handler(struct work_struct *work) printk( "%s(%d):%s bh_handler() entry\n", __FILE__,__LINE__,info->device_name); - info->bh_running = 1; + info->bh_running = true; while((action = bh_action(info)) != 0) { @@ -2100,7 +2117,7 @@ void bh_handler(struct work_struct *work) __FILE__,__LINE__,info->device_name); } -void bh_receive(SLMP_INFO *info) +static void bh_receive(SLMP_INFO *info) { if ( debug_level >= DEBUG_LEVEL_BH ) printk( "%s(%d):%s bh_receive()\n", @@ -2109,7 +2126,7 @@ void bh_receive(SLMP_INFO *info) while( rx_get_frame(info) ); } -void bh_transmit(SLMP_INFO *info) +static void bh_transmit(SLMP_INFO *info) { struct tty_struct *tty = info->tty; @@ -2121,7 +2138,7 @@ void bh_transmit(SLMP_INFO *info) tty_wakeup(tty); } -void bh_status(SLMP_INFO *info) +static void bh_status(SLMP_INFO *info) { if ( debug_level >= DEBUG_LEVEL_BH ) printk( "%s(%d):%s bh_status() entry\n", @@ -2133,7 +2150,7 @@ void bh_status(SLMP_INFO *info) info->cts_chkcount = 0; } -void isr_timer(SLMP_INFO * info) +static void isr_timer(SLMP_INFO * info) { unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0; @@ -2152,14 +2169,14 @@ void isr_timer(SLMP_INFO * info) */ write_reg(info, (unsigned char)(timer + TMCS), 0); - info->irq_occurred = TRUE; + info->irq_occurred = true; if ( debug_level >= DEBUG_LEVEL_ISR ) printk("%s(%d):%s isr_timer()\n", __FILE__,__LINE__,info->device_name); } -void isr_rxint(SLMP_INFO * info) +static void isr_rxint(SLMP_INFO * info) { struct tty_struct *tty = info->tty; struct mgsl_icount *icount = &info->icount; @@ -2218,7 +2235,7 @@ void isr_rxint(SLMP_INFO * info) /* * handle async rx data interrupts */ -void isr_rxrdy(SLMP_INFO * info) +static void isr_rxrdy(SLMP_INFO * info) { u16 status; unsigned char DataByte; @@ -2232,7 +2249,7 @@ void isr_rxrdy(SLMP_INFO * info) while((status = read_reg(info,CST0)) & BIT0) { int flag = 0; - int over = 0; + bool over = false; DataByte = read_reg(info,TRB); icount->rx++; @@ -2265,7 +2282,7 @@ void isr_rxrdy(SLMP_INFO * info) * reported immediately, and doesn't * affect the current character */ - over = 1; + over = true; } } } /* end of if (error) */ @@ -2318,14 +2335,14 @@ static void isr_txeom(SLMP_INFO * info, unsigned char status) info->icount.txok++; } - info->tx_active = 0; + info->tx_active = false; info->tx_count = info->tx_put = info->tx_get = 0; del_timer(&info->tx_timer); if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) { info->serial_signals &= ~SerialSignal_RTS; - info->drop_rts_on_tx_done = 0; + info->drop_rts_on_tx_done = false; set_signals(info); } @@ -2348,7 +2365,7 @@ static void isr_txeom(SLMP_INFO * info, unsigned char status) /* * handle tx status interrupts */ -void isr_txint(SLMP_INFO * info) +static void isr_txint(SLMP_INFO * info) { unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS); @@ -2376,7 +2393,7 @@ void isr_txint(SLMP_INFO * info) /* * handle async tx data interrupts */ -void isr_txrdy(SLMP_INFO * info) +static void isr_txrdy(SLMP_INFO * info) { if ( debug_level >= DEBUG_LEVEL_ISR ) printk("%s(%d):%s isr_txrdy() tx_count=%d\n", @@ -2398,7 +2415,7 @@ void isr_txrdy(SLMP_INFO * info) if ( info->tx_count ) tx_load_fifo( info ); else { - info->tx_active = 0; + info->tx_active = false; info->ie0_value &= ~TXRDYE; write_reg(info, IE0, info->ie0_value); } @@ -2407,7 +2424,7 @@ void isr_txrdy(SLMP_INFO * info) info->pending_bh |= BH_TRANSMIT; } -void isr_rxdmaok(SLMP_INFO * info) +static void isr_rxdmaok(SLMP_INFO * info) { /* BIT7 = EOT (end of transfer) * BIT6 = EOM (end of message/frame) @@ -2424,7 +2441,7 @@ void isr_rxdmaok(SLMP_INFO * info) info->pending_bh |= BH_RECEIVE; } -void isr_rxdmaerror(SLMP_INFO * info) +static void isr_rxdmaerror(SLMP_INFO * info) { /* BIT5 = BOF (buffer overflow) * BIT4 = COF (counter overflow) @@ -2438,11 +2455,11 @@ void isr_rxdmaerror(SLMP_INFO * info) printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n", __FILE__,__LINE__,info->device_name,status); - info->rx_overflow = TRUE; + info->rx_overflow = true; info->pending_bh |= BH_RECEIVE; } -void isr_txdmaok(SLMP_INFO * info) +static void isr_txdmaok(SLMP_INFO * info) { unsigned char status_reg1 = read_reg(info, SR1); @@ -2460,7 +2477,7 @@ void isr_txdmaok(SLMP_INFO * info) write_reg(info, IE0, info->ie0_value); } -void isr_txdmaerror(SLMP_INFO * info) +static void isr_txdmaerror(SLMP_INFO * info) { /* BIT5 = BOF (buffer overflow) * BIT4 = COF (counter overflow) @@ -2477,7 +2494,7 @@ void isr_txdmaerror(SLMP_INFO * info) /* handle input serial signal changes */ -void isr_io_pin( SLMP_INFO *info, u16 status ) +static void isr_io_pin( SLMP_INFO *info, u16 status ) { struct mgsl_icount *icount; @@ -2586,9 +2603,9 @@ void isr_io_pin( SLMP_INFO *info, u16 status ) * dev_id device ID supplied during interrupt registration * regs interrupted processor context */ -static irqreturn_t synclinkmp_interrupt(int irq, void *dev_id) +static irqreturn_t synclinkmp_interrupt(int dummy, void *dev_id) { - SLMP_INFO * info; + SLMP_INFO *info = dev_id; unsigned char status, status0, status1=0; unsigned char dmastatus, dmastatus0, dmastatus1=0; unsigned char timerstatus0, timerstatus1=0; @@ -2597,12 +2614,8 @@ static irqreturn_t synclinkmp_interrupt(int irq, void *dev_id) unsigned short tmp; if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d): synclinkmp_interrupt(%d)entry.\n", - __FILE__,__LINE__,irq); - - info = (SLMP_INFO *)dev_id; - if (!info) - return IRQ_NONE; + printk(KERN_DEBUG "%s(%d): synclinkmp_interrupt(%d)entry.\n", + __FILE__, __LINE__, info->irq_level); spin_lock(&info->lock); @@ -2615,9 +2628,9 @@ static irqreturn_t synclinkmp_interrupt(int irq, void *dev_id) timerstatus0 = read_reg(info, ISR2); if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n", - __FILE__,__LINE__,info->device_name, - status0,dmastatus0,timerstatus0); + printk(KERN_DEBUG "%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n", + __FILE__, __LINE__, info->device_name, + status0, dmastatus0, timerstatus0); if (info->port_count == 4) { /* get status for SCA1 (ports 2-3) */ @@ -2695,15 +2708,15 @@ static irqreturn_t synclinkmp_interrupt(int irq, void *dev_id) printk("%s(%d):%s queueing bh task.\n", __FILE__,__LINE__,port->device_name); schedule_work(&port->task); - port->bh_requested = 1; + port->bh_requested = true; } } spin_unlock(&info->lock); if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):synclinkmp_interrupt(%d)exit.\n", - __FILE__,__LINE__,irq); + printk(KERN_DEBUG "%s(%d):synclinkmp_interrupt(%d)exit.\n", + __FILE__, __LINE__, info->irq_level); return IRQ_HANDLED; } @@ -3324,7 +3337,8 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, { DECLARE_WAITQUEUE(wait, current); int retval; - int do_clocal = 0, extra_count = 0; + bool do_clocal = false; + bool extra_count = false; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -3339,7 +3353,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, } if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; + do_clocal = true; /* Wait for carrier detect and the line to become * free (i.e., not in use by the callout). While we are in @@ -3357,7 +3371,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, spin_lock_irqsave(&info->lock, flags); if (!tty_hung_up_p(filp)) { - extra_count = 1; + extra_count = true; info->count--; } spin_unlock_irqrestore(&info->lock, flags); @@ -3417,7 +3431,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, return retval; } -int alloc_dma_bufs(SLMP_INFO *info) +static int alloc_dma_bufs(SLMP_INFO *info) { unsigned short BuffersPerFrame; unsigned short BufferCount; @@ -3491,7 +3505,7 @@ int alloc_dma_bufs(SLMP_INFO *info) /* Allocate DMA buffers for the transmit and receive descriptor lists. */ -int alloc_buf_list(SLMP_INFO *info) +static int alloc_buf_list(SLMP_INFO *info) { unsigned int i; @@ -3550,7 +3564,7 @@ int alloc_buf_list(SLMP_INFO *info) /* Allocate the frame DMA buffers used by the specified buffer list. */ -int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count) +static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count) { int i; unsigned long phys_addr; @@ -3567,7 +3581,7 @@ int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex, return 0; } -void free_dma_bufs(SLMP_INFO *info) +static void free_dma_bufs(SLMP_INFO *info) { info->buffer_list = NULL; info->rx_buf_list = NULL; @@ -3577,7 +3591,7 @@ void free_dma_bufs(SLMP_INFO *info) /* allocate buffer large enough to hold max_frame_size. * This buffer is used to pass an assembled frame to the line discipline. */ -int alloc_tmp_rx_buf(SLMP_INFO *info) +static int alloc_tmp_rx_buf(SLMP_INFO *info) { info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); if (info->tmp_rx_buf == NULL) @@ -3585,13 +3599,13 @@ int alloc_tmp_rx_buf(SLMP_INFO *info) return 0; } -void free_tmp_rx_buf(SLMP_INFO *info) +static void free_tmp_rx_buf(SLMP_INFO *info) { kfree(info->tmp_rx_buf); info->tmp_rx_buf = NULL; } -int claim_resources(SLMP_INFO *info) +static int claim_resources(SLMP_INFO *info) { if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) { printk( "%s(%d):%s mem addr conflict, Addr=%08X\n", @@ -3600,7 +3614,7 @@ int claim_resources(SLMP_INFO *info) goto errout; } else - info->shared_mem_requested = 1; + info->shared_mem_requested = true; if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) { printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n", @@ -3609,7 +3623,7 @@ int claim_resources(SLMP_INFO *info) goto errout; } else - info->lcr_mem_requested = 1; + info->lcr_mem_requested = true; if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) { printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n", @@ -3618,7 +3632,7 @@ int claim_resources(SLMP_INFO *info) goto errout; } else - info->sca_base_requested = 1; + info->sca_base_requested = true; if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) { printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n", @@ -3627,9 +3641,10 @@ int claim_resources(SLMP_INFO *info) goto errout; } else - info->sca_statctrl_requested = 1; + info->sca_statctrl_requested = true; - info->memory_base = ioremap(info->phys_memory_base,SCA_MEM_SIZE); + info->memory_base = ioremap_nocache(info->phys_memory_base, + SCA_MEM_SIZE); if (!info->memory_base) { printk( "%s(%d):%s Cant map shared memory, MemAddr=%08X\n", __FILE__,__LINE__,info->device_name, info->phys_memory_base ); @@ -3637,7 +3652,7 @@ int claim_resources(SLMP_INFO *info) goto errout; } - info->lcr_base = ioremap(info->phys_lcr_base,PAGE_SIZE); + info->lcr_base = ioremap_nocache(info->phys_lcr_base, PAGE_SIZE); if (!info->lcr_base) { printk( "%s(%d):%s Cant map LCR memory, MemAddr=%08X\n", __FILE__,__LINE__,info->device_name, info->phys_lcr_base ); @@ -3646,7 +3661,7 @@ int claim_resources(SLMP_INFO *info) } info->lcr_base += info->lcr_offset; - info->sca_base = ioremap(info->phys_sca_base,PAGE_SIZE); + info->sca_base = ioremap_nocache(info->phys_sca_base, PAGE_SIZE); if (!info->sca_base) { printk( "%s(%d):%s Cant map SCA memory, MemAddr=%08X\n", __FILE__,__LINE__,info->device_name, info->phys_sca_base ); @@ -3655,7 +3670,8 @@ int claim_resources(SLMP_INFO *info) } info->sca_base += info->sca_offset; - info->statctrl_base = ioremap(info->phys_statctrl_base,PAGE_SIZE); + info->statctrl_base = ioremap_nocache(info->phys_statctrl_base, + PAGE_SIZE); if (!info->statctrl_base) { printk( "%s(%d):%s Cant map SCA Status/Control memory, MemAddr=%08X\n", __FILE__,__LINE__,info->device_name, info->phys_statctrl_base ); @@ -3678,7 +3694,7 @@ errout: return -ENODEV; } -void release_resources(SLMP_INFO *info) +static void release_resources(SLMP_INFO *info) { if ( debug_level >= DEBUG_LEVEL_INFO ) printk( "%s(%d):%s release_resources() entry\n", @@ -3686,24 +3702,24 @@ void release_resources(SLMP_INFO *info) if ( info->irq_requested ) { free_irq(info->irq_level, info); - info->irq_requested = 0; + info->irq_requested = false; } if ( info->shared_mem_requested ) { release_mem_region(info->phys_memory_base,SCA_MEM_SIZE); - info->shared_mem_requested = 0; + info->shared_mem_requested = false; } if ( info->lcr_mem_requested ) { release_mem_region(info->phys_lcr_base + info->lcr_offset,128); - info->lcr_mem_requested = 0; + info->lcr_mem_requested = false; } if ( info->sca_base_requested ) { release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE); - info->sca_base_requested = 0; + info->sca_base_requested = false; } if ( info->sca_statctrl_requested ) { release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE); - info->sca_statctrl_requested = 0; + info->sca_statctrl_requested = false; } if (info->memory_base){ @@ -3734,7 +3750,7 @@ void release_resources(SLMP_INFO *info) /* Add the specified device instance data structure to the * global linked list of devices and increment the device count. */ -void add_device(SLMP_INFO *info) +static void add_device(SLMP_INFO *info) { info->next_device = NULL; info->line = synclinkmp_device_count; @@ -3857,7 +3873,7 @@ static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev) return info; } -void device_init(int adapter_num, struct pci_dev *pdev) +static void device_init(int adapter_num, struct pci_dev *pdev) { SLMP_INFO *port_array[SCA_MAX_PORTS]; int port; @@ -3906,7 +3922,7 @@ void device_init(int adapter_num, struct pci_dev *pdev) port_array[0]->irq_level ); } else { - port_array[0]->irq_requested = 1; + port_array[0]->irq_requested = true; adapter_test(port_array[0]); } } @@ -4051,7 +4067,7 @@ module_exit(synclinkmp_exit); * The TxCLK and RxCLK signals are generated from the BRG and * the TxD is looped back to the RxD internally. */ -void enable_loopback(SLMP_INFO *info, int enable) +static void enable_loopback(SLMP_INFO *info, int enable) { if (enable) { /* MD2 (Mode Register 2) @@ -4098,7 +4114,7 @@ void enable_loopback(SLMP_INFO *info, int enable) * data_rate data rate of clock in bits per second * A data rate of 0 disables the AUX clock. */ -void set_rate( SLMP_INFO *info, u32 data_rate ) +static void set_rate( SLMP_INFO *info, u32 data_rate ) { u32 TMCValue; unsigned char BRValue; @@ -4144,7 +4160,7 @@ void set_rate( SLMP_INFO *info, u32 data_rate ) /* Disable receiver */ -void rx_stop(SLMP_INFO *info) +static void rx_stop(SLMP_INFO *info) { if (debug_level >= DEBUG_LEVEL_ISR) printk("%s(%d):%s rx_stop()\n", @@ -4159,13 +4175,13 @@ void rx_stop(SLMP_INFO *info) write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */ write_reg(info, RXDMA + DIR, 0); /* disable Rx DMA interrupts */ - info->rx_enabled = 0; - info->rx_overflow = 0; + info->rx_enabled = false; + info->rx_overflow = false; } /* enable the receiver */ -void rx_start(SLMP_INFO *info) +static void rx_start(SLMP_INFO *info) { int i; @@ -4215,14 +4231,14 @@ void rx_start(SLMP_INFO *info) write_reg(info, CMD, RXENABLE); - info->rx_overflow = FALSE; - info->rx_enabled = 1; + info->rx_overflow = false; + info->rx_enabled = true; } /* Enable the transmitter and send a transmit frame if * one is loaded in the DMA buffers. */ -void tx_start(SLMP_INFO *info) +static void tx_start(SLMP_INFO *info) { if (debug_level >= DEBUG_LEVEL_ISR) printk("%s(%d):%s tx_start() tx_count=%d\n", @@ -4231,7 +4247,7 @@ void tx_start(SLMP_INFO *info) if (!info->tx_enabled ) { write_reg(info, CMD, TXRESET); write_reg(info, CMD, TXENABLE); - info->tx_enabled = TRUE; + info->tx_enabled = true; } if ( info->tx_count ) { @@ -4240,7 +4256,7 @@ void tx_start(SLMP_INFO *info) /* RTS and set a flag indicating that the driver should */ /* negate RTS when the transmission completes. */ - info->drop_rts_on_tx_done = 0; + info->drop_rts_on_tx_done = false; if (info->params.mode != MGSL_MODE_ASYNC) { @@ -4249,7 +4265,7 @@ void tx_start(SLMP_INFO *info) if ( !(info->serial_signals & SerialSignal_RTS) ) { info->serial_signals |= SerialSignal_RTS; set_signals( info ); - info->drop_rts_on_tx_done = 1; + info->drop_rts_on_tx_done = true; } } @@ -4286,13 +4302,13 @@ void tx_start(SLMP_INFO *info) write_reg(info, IE0, info->ie0_value); } - info->tx_active = 1; + info->tx_active = true; } } /* stop the transmitter and DMA */ -void tx_stop( SLMP_INFO *info ) +static void tx_stop( SLMP_INFO *info ) { if (debug_level >= DEBUG_LEVEL_ISR) printk("%s(%d):%s tx_stop()\n", @@ -4312,14 +4328,14 @@ void tx_stop( SLMP_INFO *info ) info->ie0_value &= ~TXRDYE; write_reg(info, IE0, info->ie0_value); /* disable tx data interrupts */ - info->tx_enabled = 0; - info->tx_active = 0; + info->tx_enabled = false; + info->tx_active = false; } /* Fill the transmit FIFO until the FIFO is full or * there is no more data to load. */ -void tx_load_fifo(SLMP_INFO *info) +static void tx_load_fifo(SLMP_INFO *info) { u8 TwoBytes[2]; @@ -4368,7 +4384,7 @@ void tx_load_fifo(SLMP_INFO *info) /* Reset a port to a known state */ -void reset_port(SLMP_INFO *info) +static void reset_port(SLMP_INFO *info) { if (info->sca_base) { @@ -4392,7 +4408,7 @@ void reset_port(SLMP_INFO *info) /* Reset all the ports to a known state. */ -void reset_adapter(SLMP_INFO *info) +static void reset_adapter(SLMP_INFO *info) { int i; @@ -4404,7 +4420,7 @@ void reset_adapter(SLMP_INFO *info) /* Program port for asynchronous communications. */ -void async_mode(SLMP_INFO *info) +static void async_mode(SLMP_INFO *info) { unsigned char RegValue; @@ -4543,7 +4559,7 @@ void async_mode(SLMP_INFO *info) /* Program the SCA for HDLC communications. */ -void hdlc_mode(SLMP_INFO *info) +static void hdlc_mode(SLMP_INFO *info) { unsigned char RegValue; u32 DpllDivisor; @@ -4745,7 +4761,7 @@ void hdlc_mode(SLMP_INFO *info) /* Set the transmit HDLC idle mode */ -void tx_set_idle(SLMP_INFO *info) +static void tx_set_idle(SLMP_INFO *info) { unsigned char RegValue = 0xff; @@ -4765,7 +4781,7 @@ void tx_set_idle(SLMP_INFO *info) /* Query the adapter for the state of the V24 status (input) signals. */ -void get_signals(SLMP_INFO *info) +static void get_signals(SLMP_INFO *info) { u16 status = read_reg(info, SR3); u16 gpstatus = read_status_reg(info); @@ -4794,7 +4810,7 @@ void get_signals(SLMP_INFO *info) /* Set the state of DTR and RTS based on contents of * serial_signals member of device context. */ -void set_signals(SLMP_INFO *info) +static void set_signals(SLMP_INFO *info) { unsigned char RegValue; u16 EnableBit; @@ -4823,7 +4839,7 @@ void set_signals(SLMP_INFO *info) * and set the current buffer to the first buffer. This effectively * makes all buffers free and discards any data in buffers. */ -void rx_reset_buffers(SLMP_INFO *info) +static void rx_reset_buffers(SLMP_INFO *info) { rx_free_frame_buffers(info, 0, info->rx_buf_count - 1); } @@ -4834,16 +4850,16 @@ void rx_reset_buffers(SLMP_INFO *info) * first index of 1st receive buffer of frame * last index of last receive buffer of frame */ -void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last) +static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last) { - int done = 0; + bool done = false; while(!done) { /* reset current buffer for reuse */ info->rx_buf_list[first].status = 0xff; if (first == last) { - done = 1; + done = true; /* set new last rx descriptor address */ write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry); } @@ -4860,14 +4876,14 @@ void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int las /* Return a received frame from the receive DMA buffers. * Only frames received without errors are returned. * - * Return Value: 1 if frame returned, otherwise 0 + * Return Value: true if frame returned, otherwise false */ -int rx_get_frame(SLMP_INFO *info) +static bool rx_get_frame(SLMP_INFO *info) { unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */ unsigned short status; unsigned int framesize = 0; - int ReturnCode = 0; + bool ReturnCode = false; unsigned long flags; struct tty_struct *tty = info->tty; unsigned char addr_field = 0xff; @@ -5018,7 +5034,7 @@ CheckAgain: /* Free the buffers used by this frame. */ rx_free_frame_buffers( info, StartIndex, EndIndex ); - ReturnCode = 1; + ReturnCode = true; Cleanup: if ( info->rx_enabled && info->rx_overflow ) { @@ -5037,7 +5053,7 @@ Cleanup: /* load the transmit DMA buffer with data */ -void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count) +static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count) { unsigned short copy_count; unsigned int i = 0; @@ -5077,12 +5093,12 @@ void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count) info->last_tx_buf = ++i; } -int register_test(SLMP_INFO *info) +static bool register_test(SLMP_INFO *info) { static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96}; static unsigned int count = ARRAY_SIZE(testval); unsigned int i; - int rc = TRUE; + bool rc = true; unsigned long flags; spin_lock_irqsave(&info->lock,flags); @@ -5105,7 +5121,7 @@ int register_test(SLMP_INFO *info) (read_reg(info, SA0) != testval[(i+2)%count]) || (read_reg(info, SA1) != testval[(i+3)%count]) ) { - rc = FALSE; + rc = false; break; } } @@ -5116,7 +5132,7 @@ int register_test(SLMP_INFO *info) return rc; } -int irq_test(SLMP_INFO *info) +static bool irq_test(SLMP_INFO *info) { unsigned long timeout; unsigned long flags; @@ -5128,7 +5144,7 @@ int irq_test(SLMP_INFO *info) /* assume failure */ info->init_error = DiagStatus_IrqFailure; - info->irq_occurred = FALSE; + info->irq_occurred = false; /* setup timer0 on SCA0 to interrupt */ @@ -5167,7 +5183,7 @@ int irq_test(SLMP_INFO *info) /* initialize individual SCA device (2 ports) */ -static int sca_init(SLMP_INFO *info) +static bool sca_init(SLMP_INFO *info) { /* set wait controller to single mem partition (low), no wait states */ write_reg(info, PABR0, 0); /* wait controller addr boundary 0 */ @@ -5203,12 +5219,12 @@ static int sca_init(SLMP_INFO *info) */ write_reg(info, ITCR, 0); - return TRUE; + return true; } /* initialize adapter hardware */ -int init_adapter(SLMP_INFO *info) +static bool init_adapter(SLMP_INFO *info) { int i; @@ -5261,20 +5277,20 @@ int init_adapter(SLMP_INFO *info) sca_init(info->port_array[0]); sca_init(info->port_array[2]); - return TRUE; + return true; } /* Loopback an HDLC frame to test the hardware * interrupt and DMA functions. */ -int loopback_test(SLMP_INFO *info) +static bool loopback_test(SLMP_INFO *info) { #define TESTFRAMESIZE 20 unsigned long timeout; u16 count = TESTFRAMESIZE; unsigned char buf[TESTFRAMESIZE]; - int rc = FALSE; + bool rc = false; unsigned long flags; struct tty_struct *oldtty = info->tty; @@ -5308,16 +5324,16 @@ int loopback_test(SLMP_INFO *info) msleep_interruptible(10); if (rx_get_frame(info)) { - rc = TRUE; + rc = true; break; } } /* verify received frame length and contents */ - if (rc == TRUE && - ( info->tmp_rx_buf_count != count || - memcmp(buf, info->tmp_rx_buf,count))) { - rc = FALSE; + if (rc && + ( info->tmp_rx_buf_count != count || + memcmp(buf, info->tmp_rx_buf,count))) { + rc = false; } spin_lock_irqsave(&info->lock,flags); @@ -5332,7 +5348,7 @@ int loopback_test(SLMP_INFO *info) /* Perform diagnostics on hardware */ -int adapter_test( SLMP_INFO *info ) +static int adapter_test( SLMP_INFO *info ) { unsigned long flags; if ( debug_level >= DEBUG_LEVEL_INFO ) @@ -5394,7 +5410,7 @@ int adapter_test( SLMP_INFO *info ) /* Test the shared memory on a PCI adapter. */ -int memory_test(SLMP_INFO *info) +static bool memory_test(SLMP_INFO *info) { static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa, 0x66666666, 0x99999999, 0xffffffff, 0x12345678 }; @@ -5408,7 +5424,7 @@ int memory_test(SLMP_INFO *info) for ( i = 0 ; i < count ; i++ ) { *addr = testval[i]; if ( *addr != testval[i] ) - return FALSE; + return false; } /* Test address lines with incrementing pattern over */ @@ -5423,12 +5439,12 @@ int memory_test(SLMP_INFO *info) for ( i = 0 ; i < limit ; i++ ) { if ( *addr != i * 4 ) - return FALSE; + return false; addr++; } memset( info->memory_base, 0, SCA_MEM_SIZE ); - return TRUE; + return true; } /* Load data into PCI adapter shared memory. @@ -5446,7 +5462,7 @@ int memory_test(SLMP_INFO *info) * the write transation. This allows any pending DMA request to gain control * of the local bus in a timely fasion. */ -void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count) +static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count) { /* A load interval of 16 allows for 4 32-bit writes at */ /* 136ns each for a maximum latency of 542ns on the local bus.*/ @@ -5465,7 +5481,7 @@ void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned shor memcpy(dest, src, count % sca_pci_load_interval); } -void trace_block(SLMP_INFO *info,const char* data, int count, int xmit) +static void trace_block(SLMP_INFO *info,const char* data, int count, int xmit) { int i; int linecount; @@ -5500,7 +5516,7 @@ void trace_block(SLMP_INFO *info,const char* data, int count, int xmit) /* called when HDLC frame times out * update stats and do tx completion processing */ -void tx_timeout(unsigned long context) +static void tx_timeout(unsigned long context) { SLMP_INFO *info = (SLMP_INFO*)context; unsigned long flags; @@ -5512,7 +5528,7 @@ void tx_timeout(unsigned long context) info->icount.txtimeout++; } spin_lock_irqsave(&info->lock,flags); - info->tx_active = 0; + info->tx_active = false; info->tx_count = info->tx_put = info->tx_get = 0; spin_unlock_irqrestore(&info->lock,flags); @@ -5527,7 +5543,7 @@ void tx_timeout(unsigned long context) /* called to periodically check the DSR/RI modem signal input status */ -void status_timeout(unsigned long context) +static void status_timeout(unsigned long context) { u16 status = 0; SLMP_INFO *info = (SLMP_INFO*)context; @@ -5578,36 +5594,36 @@ void status_timeout(unsigned long context) } -unsigned char read_reg(SLMP_INFO * info, unsigned char Addr) +static unsigned char read_reg(SLMP_INFO * info, unsigned char Addr) { CALC_REGADDR(); return *RegAddr; } -void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value) +static void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value) { CALC_REGADDR(); *RegAddr = Value; } -u16 read_reg16(SLMP_INFO * info, unsigned char Addr) +static u16 read_reg16(SLMP_INFO * info, unsigned char Addr) { CALC_REGADDR(); return *((u16 *)RegAddr); } -void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value) +static void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value) { CALC_REGADDR(); *((u16 *)RegAddr) = Value; } -unsigned char read_status_reg(SLMP_INFO * info) +static unsigned char read_status_reg(SLMP_INFO * info) { unsigned char *RegAddr = (unsigned char *)info->statctrl_base; return *RegAddr; } -void write_control_reg(SLMP_INFO * info) +static void write_control_reg(SLMP_INFO * info) { unsigned char *RegAddr = (unsigned char *)info->statctrl_base; *RegAddr = info->port_array[0]->ctrlreg_value;