X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fchar%2Fmxser.c;h=4c756bbba94831aafa3895853394409688c896c6;hb=d7b6de14a0ef8a376f9d57b867545b47302b7bfb;hp=6307e301bd262120dcc59308016dbb1846f36c01;hpb=908cf4b925e419bc74f3297b2f0e51d6f8a81da2;p=linux-2.6

diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 6307e301bd..4c756bbba9 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -47,7 +47,7 @@
 
 #include "mxser.h"
 
-#define	MXSER_VERSION	"2.0.3"		/* 1.11 */
+#define	MXSER_VERSION	"2.0.4"		/* 1.12 */
 #define	MXSERMAJOR	 174
 #define	MXSERCUMAJOR	 175
 
@@ -71,12 +71,13 @@
 #define UART_MCR_AFE		0x20
 #define UART_LSR_SPECIAL	0x1E
 
+#define PCI_DEVICE_ID_POS104UL	0x1044
 #define PCI_DEVICE_ID_CB108	0x1080
+#define PCI_DEVICE_ID_CP102UF	0x1023
 #define PCI_DEVICE_ID_CB114	0x1142
 #define PCI_DEVICE_ID_CP114UL	0x1143
 #define PCI_DEVICE_ID_CB134I	0x1341
 #define PCI_DEVICE_ID_CP138U	0x1380
-#define PCI_DEVICE_ID_POS104UL	0x1044
 
 
 #define C168_ASIC_ID    1
@@ -142,7 +143,8 @@ static const struct mxser_cardinfo mxser_cards[] = {
 	{ "CB-134I series",	4, },
 	{ "CP-138U series",	8, },
 	{ "POS-104UL series",	4, },
-	{ "CP-114UL series",	4, }
+	{ "CP-114UL series",	4, },
+/*30*/	{ "CP-102UF series",	2, }
 };
 
 /* driver_data correspond to the lines in the structure above
@@ -172,6 +174,7 @@ static struct pci_device_id mxser_pcibrds[] = {
 	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U),	.driver_data = 27 },
 	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL),	.driver_data = 28 },
 	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL),	.driver_data = 29 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP102UF),	.driver_data = 30 },
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
@@ -1414,7 +1417,6 @@ static int mxser_set_serial_info(struct mxser_port *info,
 		info->port.closing_wait = new_serial.closing_wait * HZ / 100;
 		info->port.tty->low_latency =
 				(info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-		info->port.tty->low_latency = 0;
 		if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST &&
 				(new_serial.baud_base != info->baud_base ||
 				new_serial.custom_divisor !=
@@ -1464,27 +1466,6 @@ static int mxser_get_lsr_info(struct mxser_port *info,
 	return put_user(result, value);
 }
 
-/*
- * This routine sends a break character out the serial port.
- */
-static void mxser_send_break(struct mxser_port *info, int duration)
-{
-	unsigned long flags;
-
-	if (!info->ioaddr)
-		return;
-	set_current_state(TASK_INTERRUPTIBLE);
-	spin_lock_irqsave(&info->slock, flags);
-	outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC,
-		info->ioaddr + UART_LCR);
-	spin_unlock_irqrestore(&info->slock, flags);
-	schedule_timeout(duration);
-	spin_lock_irqsave(&info->slock, flags);
-	outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC,
-		info->ioaddr + UART_LCR);
-	spin_unlock_irqrestore(&info->slock, flags);
-}
-
 static int mxser_tiocmget(struct tty_struct *tty, struct file *file)
 {
 	struct mxser_port *info = tty->driver_data;
@@ -1872,21 +1853,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
 		return -EIO;
 
 	switch (cmd) {
-	case TCSBRK:		/* SVID version: non-zero arg --> no break */
-		retval = tty_check_change(tty);
-		if (retval)
-			return retval;
-		tty_wait_until_sent(tty, 0);
-		if (!arg)
-			mxser_send_break(info, HZ / 4);	/* 1/4 second */
-		return 0;
-	case TCSBRKP:		/* support for POSIX tcsendbreak() */
-		retval = tty_check_change(tty);
-		if (retval)
-			return retval;
-		tty_wait_until_sent(tty, 0);
-		mxser_send_break(info, arg ? arg * (HZ / 10) : HZ / 4);
-		return 0;
 	case TIOCGSERIAL:
 		lock_kernel();
 		retval = mxser_get_serial_info(info, argp);
@@ -2219,7 +2185,7 @@ static void mxser_hangup(struct tty_struct *tty)
 /*
  * mxser_rs_break() --- routine which turns the break handling on or off
  */
-static void mxser_rs_break(struct tty_struct *tty, int break_state)
+static int mxser_rs_break(struct tty_struct *tty, int break_state)
 {
 	struct mxser_port *info = tty->driver_data;
 	unsigned long flags;
@@ -2232,6 +2198,7 @@ static void mxser_rs_break(struct tty_struct *tty, int break_state)
 		outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC,
 			info->ioaddr + UART_LCR);
 	spin_unlock_irqrestore(&info->slock, flags);
+	return 0;
 }
 
 static void mxser_receive_chars(struct mxser_port *port, int *status)