X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fatm%2FKconfig;h=b554edac1ced1cde073e83d7bef273d63ad31da8;hb=d973664992d814d93db161b28c0cc9a4c7e68f42;hp=01a9f1cb77438eeff822a5ac3a825179a72e8028;hpb=5367f2d67c7d0bf1faae90e6e7b4e2ac3c9b5e0f;p=linux-2.6

diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
index 01a9f1cb77..b554edac1c 100644
--- a/drivers/atm/Kconfig
+++ b/drivers/atm/Kconfig
@@ -2,19 +2,27 @@
 # ATM device configuration
 #
 
-menu "ATM drivers"
+menuconfig ATM_DRIVERS
+	bool "ATM drivers"
 	depends on NETDEVICES && ATM
+	default y
+	---help---
+	  Say Y here to get to see options for Asynchronous Transfer Mode
+	  device drivers. This option alone does not add any kernel code.
+
+	  If you say N, all options in this submenu will be skipped and disabled.
+
+if ATM_DRIVERS && NETDEVICES && ATM
 
 config ATM_DUMMY
 	tristate "Dummy ATM driver"
-	depends on ATM
 	help
 	  Dummy ATM driver. Useful for proxy signalling, testing,
 	  and development.  If unsure, say N.
 
 config ATM_TCP
 	tristate "ATM over TCP"
-	depends on INET && ATM
+	depends on INET
 	help
 	  ATM over TCP driver. Useful mainly for development and for
 	  experiments. If unsure, say N.
@@ -30,7 +38,7 @@ config ATM_LANAI
 
 config ATM_ENI
 	tristate "Efficient Networks ENI155P"
-	depends on PCI && ATM
+	depends on PCI
 	---help---
 	  Driver for the Efficient Networks ENI155p series and SMC ATM
 	  Power155 155 Mbps ATM adapters. Both, the versions with 512KB and
@@ -139,7 +147,7 @@ config ATM_ENI_BURST_RX_2W
 
 config ATM_FIRESTREAM
 	tristate "Fujitsu FireStream (FS50/FS155) "
-	depends on PCI && ATM
+	depends on PCI && VIRT_TO_BUS
 	help
 	  Driver for the Fujitsu FireStream 155 (MB86697) and
 	  FireStream 50 (MB86695) ATM PCI chips.
@@ -149,7 +157,7 @@ config ATM_FIRESTREAM
 
 config ATM_ZATM
 	tristate "ZeitNet ZN1221/ZN1225"
-	depends on PCI && ATM
+	depends on PCI && VIRT_TO_BUS
 	help
 	  Driver for the ZeitNet ZN1221 (MMF) and ZN1225 (UTP-5) 155 Mbps ATM
 	  adapters.
@@ -167,13 +175,9 @@ config ATM_ZATM_DEBUG
 	  Note that extended debugging may create certain race conditions
 	  itself. Enable this ONLY if you suspect problems with the driver.
 
-#   bool 'Rolfs TI TNETA1570' CONFIG_ATM_TNETA1570 y
-#   if [ "$CONFIG_ATM_TNETA1570" = "y" ]; then
-#      bool '  Enable extended debugging' CONFIG_ATM_TNETA1570_DEBUG n
-#   fi
 config ATM_NICSTAR
 	tristate "IDT 77201 (NICStAR) (ForeRunnerLE)"
-	depends on PCI && ATM && !64BIT
+	depends on PCI && !64BIT && VIRT_TO_BUS
 	help
 	  The NICStAR chipset family is used in a large number of ATM NICs for
 	  25 and for 155 Mbps, including IDT cards and the Fore ForeRunnerLE
@@ -206,7 +210,7 @@ config ATM_NICSTAR_USE_IDT77105
 
 config ATM_IDT77252
 	tristate "IDT 77252 (NICStAR II)"
-	depends on PCI && ATM
+	depends on PCI
 	help
 	  Driver for the IDT 77252 ATM PCI chips.
 
@@ -241,7 +245,8 @@ config ATM_IDT77252_USE_SUNI
 
 config ATM_AMBASSADOR
 	tristate "Madge Ambassador (Collage PCI 155 Server)"
-	depends on PCI && ATM
+	depends on PCI && VIRT_TO_BUS
+	select BITREVERSE
 	help
 	  This is a driver for ATMizer based ATM card produced by Madge
 	  Networks Ltd. Say Y (or M to compile as a module named ambassador)
@@ -265,7 +270,7 @@ config ATM_AMBASSADOR_DEBUG
 
 config ATM_HORIZON
 	tristate "Madge Horizon [Ultra] (Collage PCI 25 and Collage PCI 155 Client)"
-	depends on PCI && ATM
+	depends on PCI && VIRT_TO_BUS
 	help
 	  This is a driver for the Horizon chipset ATM adapter cards once
 	  produced by Madge Networks Ltd. Say Y (or M to compile as a module
@@ -289,7 +294,7 @@ config ATM_HORIZON_DEBUG
 
 config ATM_IA
 	tristate "Interphase ATM PCI x575/x525/x531"
-	depends on PCI && ATM && !64BIT
+	depends on PCI && !64BIT
 	---help---
 	  This is a driver for the Interphase (i)ChipSAR adapter cards
 	  which include a variety of variants in term of the size of the
@@ -322,7 +327,7 @@ config ATM_IA_DEBUG
 
 config ATM_FORE200E_MAYBE
 	tristate "FORE Systems 200E-series"
-	depends on (PCI || SBUS) && ATM
+	depends on PCI || SBUS
 	---help---
 	  This is a driver for the FORE Systems 200E-series ATM adapter
 	  cards. It simultaneously supports PCA-200E and SBA-200E models
@@ -398,7 +403,7 @@ config ATM_FORE200E_USE_TASKLET
 	default n
 	help
 	  This defers work to be done by the interrupt handler to a
-	  tasklet instead of hanlding everything at interrupt time.  This
+	  tasklet instead of handling everything at interrupt time.  This
 	  may improve the responsive of the host.
 
 config ATM_FORE200E_TX_RETRY
@@ -439,7 +444,7 @@ config ATM_FORE200E
 
 config ATM_HE
 	tristate "ForeRunner HE Series"
-	depends on PCI && ATM
+	depends on PCI
 	help
 	  This is a driver for the Marconi ForeRunner HE-series ATM adapter
 	  cards. It simultaneously supports the 155 and 622 versions.
@@ -451,5 +456,4 @@ config ATM_HE_USE_SUNI
 	  Support for the S/UNI-Ultra and S/UNI-622 found in the ForeRunner
 	  HE cards.  This driver provides carrier detection some statistics.
 
-endmenu
-
+endif # ATM