X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fata%2Fsata_svw.c;h=16aa6839aa5a68e435060d7035fbb129c18dc951;hb=a926c063738f31c8c8b5c2b883812a40e7868072;hp=69f651e0bc98dc9106917c9c46c90d6451da419a;hpb=b7e23d913aafc93fc5f119e1be17620073cc3811;p=linux-2.6 diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index 69f651e0bc..16aa6839aa 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -45,6 +45,8 @@ #include #include #include +#include +#include #include #ifdef CONFIG_PPC_OF @@ -59,6 +61,7 @@ enum { /* ap->flags bits */ K2_FLAG_SATA_8_PORTS = (1 << 24), K2_FLAG_NO_ATAPI_DMA = (1 << 25), + K2_FLAG_BAR_POS_3 = (1 << 26), /* Taskfile registers offsets */ K2_SATA_TF_CMD_OFFSET = 0x00, @@ -88,8 +91,10 @@ enum { /* Port stride */ K2_SATA_PORT_OFFSET = 0x100, - board_svw4 = 0, - board_svw8 = 1, + chip_svw4 = 0, + chip_svw8 = 1, + chip_svw42 = 2, /* bar 3 */ + chip_svw43 = 3, /* bar 5 */ }; static u8 k2_stat_check_status(struct ata_port *ap); @@ -97,10 +102,25 @@ static u8 k2_stat_check_status(struct ata_port *ap); static int k2_sata_check_atapi_dma(struct ata_queued_cmd *qc) { + u8 cmnd = qc->scsicmd->cmnd[0]; + if (qc->ap->flags & K2_FLAG_NO_ATAPI_DMA) return -1; /* ATAPI DMA not supported */ + else { + switch (cmnd) { + case READ_10: + case READ_12: + case READ_16: + case WRITE_10: + case WRITE_12: + case WRITE_16: + return 0; + + default: + return -1; + } - return 0; + } } static int k2_sata_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val) @@ -213,7 +233,7 @@ static void k2_bmdma_setup_mmio(struct ata_queued_cmd *qc) /* issue r/w command if this is not a ATA DMA command*/ if (qc->tf.protocol != ATA_PROT_DMA) - ap->ops->exec_command(ap, &qc->tf); + ap->ops->sff_exec_command(ap, &qc->tf); } /** @@ -249,7 +269,7 @@ static void k2_bmdma_start_mmio(struct ata_queued_cmd *qc) and the start command. */ /* issue r/w command if the access is to ATA*/ if (qc->tf.protocol == ATA_PROT_DMA) - ap->ops->exec_command(ap, &qc->tf); + ap->ops->sff_exec_command(ap, &qc->tf); } @@ -307,54 +327,27 @@ static int k2_sata_proc_info(struct Scsi_Host *shost, char *page, char **start, static struct scsi_host_template k2_sata_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, + ATA_BMDMA_SHT(DRV_NAME), #ifdef CONFIG_PPC_OF .proc_info = k2_sata_proc_info, #endif - .bios_param = ata_std_bios_param, }; -static const struct ata_port_operations k2_sata_ops = { - .tf_load = k2_sata_tf_load, - .tf_read = k2_sata_tf_read, - .check_status = k2_stat_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, +static struct ata_port_operations k2_sata_ops = { + .inherits = &ata_bmdma_port_ops, + .sff_tf_load = k2_sata_tf_load, + .sff_tf_read = k2_sata_tf_read, + .sff_check_status = k2_stat_check_status, .check_atapi_dma = k2_sata_check_atapi_dma, .bmdma_setup = k2_bmdma_setup_mmio, .bmdma_start = k2_bmdma_start_mmio, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_data_xfer, - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .irq_clear = ata_bmdma_irq_clear, - .irq_on = ata_irq_on, .scr_read = k2_sata_scr_read, .scr_write = k2_sata_scr_write, - .port_start = ata_port_start, }; static const struct ata_port_info k2_port_info[] = { - /* board_svw4 */ + /* chip_svw4 */ { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA, @@ -363,7 +356,7 @@ static const struct ata_port_info k2_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, - /* board_svw8 */ + /* chip_svw8 */ { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA | @@ -373,6 +366,24 @@ static const struct ata_port_info k2_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, + /* chip_svw42 */ + { + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | K2_FLAG_BAR_POS_3, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA6, + .port_ops = &k2_sata_ops, + }, + /* chip_svw43 */ + { + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA6, + .port_ops = &k2_sata_ops, + }, }; static void k2_sata_setup_port(struct ata_ioports *port, void __iomem *base) @@ -402,7 +413,7 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en { &k2_port_info[ent->driver_data], NULL }; struct ata_host *host; void __iomem *mmio_base; - int n_ports, i, rc; + int n_ports, i, rc, bar_pos; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); @@ -416,6 +427,9 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en if (!host) return -ENOMEM; + bar_pos = 5; + if (ppi[0]->flags & K2_FLAG_BAR_POS_3) + bar_pos = 3; /* * If this driver happens to only be useful on Apple's K2, then * we should check that here as it has a normal Serverworks ID @@ -428,17 +442,23 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en * Check if we have resources mapped at all (second function may * have been disabled by firmware) */ - if (pci_resource_len(pdev, 5) == 0) + if (pci_resource_len(pdev, bar_pos) == 0) { + /* In IDE mode we need to pin the device to ensure that + pcim_release does not clear the busmaster bit in config + space, clearing causes busmaster DMA to fail on + ports 3 & 4 */ + pcim_pin_device(pdev); return -ENODEV; + } /* Request and iomap PCI regions */ - rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME); + rc = pcim_iomap_regions(pdev, 1 << bar_pos, DRV_NAME); if (rc == -EBUSY) pcim_pin_device(pdev); if (rc) return rc; host->iomap = pcim_iomap_table(pdev); - mmio_base = host->iomap[5]; + mmio_base = host->iomap[bar_pos]; /* different controllers have different number of ports - currently 4 or 8 */ /* All ports are on the same function. Multi-function device is no @@ -472,8 +492,8 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en writel(0x0, mmio_base + K2_SATA_SIM_OFFSET); pci_set_master(pdev); - return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED, - &k2_sata_sht); + return ata_host_activate(host, pdev->irq, ata_sff_interrupt, + IRQF_SHARED, &k2_sata_sht); } /* 0x240 is device ID for Apple K2 device @@ -483,11 +503,13 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en * controller * */ static const struct pci_device_id k2_sata_pci_tbl[] = { - { PCI_VDEVICE(SERVERWORKS, 0x0240), board_svw4 }, - { PCI_VDEVICE(SERVERWORKS, 0x0241), board_svw4 }, - { PCI_VDEVICE(SERVERWORKS, 0x0242), board_svw8 }, - { PCI_VDEVICE(SERVERWORKS, 0x024a), board_svw4 }, - { PCI_VDEVICE(SERVERWORKS, 0x024b), board_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x0240), chip_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x0241), chip_svw8 }, + { PCI_VDEVICE(SERVERWORKS, 0x0242), chip_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x024a), chip_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x024b), chip_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x0410), chip_svw42 }, + { PCI_VDEVICE(SERVERWORKS, 0x0411), chip_svw43 }, { } };