X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fata%2Fpata_it821x.c;h=27843c70eb9dc64e8d6292e2dc7fe2ee425bae40;hb=478735e42bfa047384afa72dceb408035532db20;hp=257951d03dbbffbb90520e66c96421dd2f15b148;hpb=14d0647c98f52e2d76113d44de6b771ec87a934f;p=linux-2.6 diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index 257951d03d..27843c70eb 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -80,7 +80,7 @@ #define DRV_NAME "pata_it821x" -#define DRV_VERSION "0.3.8" +#define DRV_VERSION "0.4.0" struct it821x_dev { @@ -395,11 +395,11 @@ static void it821x_passthru_dev_select(struct ata_port *ap, it821x_program(ap, adev, itdev->pio[adev->devno]); itdev->last_device = device; } - ata_std_dev_select(ap, device); + ata_sff_dev_select(ap, device); } /** - * it821x_smart_qc_issue_prot - wrap qc issue prot + * it821x_smart_qc_issue - wrap qc issue prot * @qc: command * * Wrap the command issue sequence for the IT821x. We need to @@ -407,7 +407,7 @@ static void it821x_passthru_dev_select(struct ata_port *ap, * usual happenings kick off */ -static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc) +static unsigned int it821x_smart_qc_issue(struct ata_queued_cmd *qc) { switch(qc->tf.command) { @@ -425,16 +425,18 @@ static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc) case ATA_CMD_WRITE_MULTI: case ATA_CMD_WRITE_MULTI_EXT: case ATA_CMD_ID_ATA: + case ATA_CMD_INIT_DEV_PARAMS: + case 0xFC: /* Internal 'report rebuild state' */ /* Arguably should just no-op this one */ case ATA_CMD_SET_FEATURES: - return ata_qc_issue_prot(qc); + return ata_sff_qc_issue(qc); } printk(KERN_DEBUG "it821x: can't process command 0x%02X\n", qc->tf.command); return AC_ERR_DEV; } /** - * it821x_passthru_qc_issue_prot - wrap qc issue prot + * it821x_passthru_qc_issue - wrap qc issue prot * @qc: command * * Wrap the command issue sequence for the IT821x. We need to @@ -442,10 +444,10 @@ static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc) * usual happenings kick off */ -static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc) +static unsigned int it821x_passthru_qc_issue(struct ata_queued_cmd *qc) { it821x_passthru_dev_select(qc->ap, qc->dev->devno); - return ata_qc_issue_prot(qc); + return ata_sff_qc_issue(qc); } /** @@ -509,7 +511,7 @@ static void it821x_dev_config(struct ata_device *adev) if (strstr(model_num, "Integrated Technology Express")) { /* RAID mode */ - printk(KERN_INFO "IT821x %sRAID%d volume", + ata_dev_printk(adev, KERN_INFO, "%sRAID%d volume", adev->id[147]?"Bootable ":"", adev->id[129]); if (adev->id[129] != 1) @@ -519,37 +521,51 @@ static void it821x_dev_config(struct ata_device *adev) /* This is a controller firmware triggered funny, don't report the drive faulty! */ adev->horkage &= ~ATA_HORKAGE_DIAGNOSTIC; + /* No HPA in 'smart' mode */ + adev->horkage |= ATA_HORKAGE_BROKEN_HPA; } /** - * it821x_ident_hack - Hack identify data up - * @ap: Port + * it821x_read_id - Hack identify data up + * @adev: device to read + * @tf: proposed taskfile + * @id: buffer for returned ident data * - * Walk the devices on this firmware driven port and slightly + * Query the devices on this firmware driven port and slightly * mash the identify data to stop us and common tools trying to * use features not firmware supported. The firmware itself does * some masking (eg SMART) but not enough. - * - * This is a bit of an abuse of the cable method, but it is the - * only method called at the right time. We could modify the libata - * core specifically for ident hacking but while we have one offender - * it seems better to keep the fallout localised. */ -static int it821x_ident_hack(struct ata_port *ap) +static unsigned int it821x_read_id(struct ata_device *adev, + struct ata_taskfile *tf, u16 *id) { - struct ata_device *adev; - ata_link_for_each_dev(adev, &ap->link) { - if (ata_dev_enabled(adev)) { - adev->id[84] &= ~(1 << 6); /* No FUA */ - adev->id[85] &= ~(1 << 10); /* No HPA */ - adev->id[76] = 0; /* No NCQ/AN etc */ - } + unsigned int err_mask; + unsigned char model_num[ATA_ID_PROD_LEN + 1]; + + err_mask = ata_do_dev_read_id(adev, tf, id); + if (err_mask) + return err_mask; + ata_id_c_string(id, model_num, ATA_ID_PROD, sizeof(model_num)); + + id[83] &= ~(1 << 12); /* Cache flush is firmware handled */ + id[83] &= ~(1 << 13); /* Ditto for LBA48 flushes */ + id[84] &= ~(1 << 6); /* No FUA */ + id[85] &= ~(1 << 10); /* No HPA */ + id[76] = 0; /* No NCQ/AN etc */ + + if (strstr(model_num, "Integrated Technology Express")) { + /* Set feature bits the firmware neglects */ + id[49] |= 0x0300; /* LBA, DMA */ + id[82] |= 0x0400; /* LBA48 */ + id[83] &= 0x7FFF; + id[83] |= 0x4000; /* Word 83 is valid */ + id[86] |= 0x0400; /* LBA48 on */ + id[ATA_ID_MAJOR_VER] |= 0x1F; } - return ata_cable_unknown(ap); + return err_mask; } - /** * it821x_check_atapi_dma - ATAPI DMA handler * @qc: Command we are about to issue @@ -577,6 +593,136 @@ static int it821x_check_atapi_dma(struct ata_queued_cmd *qc) return 0; } +/** + * it821x_display_disk - display disk setup + * @n: Device number + * @buf: Buffer block from firmware + * + * Produce a nice informative display of the device setup as provided + * by the firmware. + */ + +static void it821x_display_disk(int n, u8 *buf) +{ + unsigned char id[41]; + int mode = 0; + char *mtype; + char mbuf[8]; + char *cbl = "(40 wire cable)"; + + static const char *types[5] = { + "RAID0", "RAID1" "RAID 0+1", "JBOD", "DISK" + }; + + if (buf[52] > 4) /* No Disk */ + return; + + ata_id_c_string((u16 *)buf, id, 0, 41); + + if (buf[51]) { + mode = ffs(buf[51]); + mtype = "UDMA"; + } else if (buf[49]) { + mode = ffs(buf[49]); + mtype = "MWDMA"; + } + + if (buf[76]) + cbl = ""; + + if (mode) + snprintf(mbuf, 8, "%5s%d", mtype, mode - 1); + else + strcpy(mbuf, "PIO"); + if (buf[52] == 4) + printk(KERN_INFO "%d: %-6s %-8s %s %s\n", + n, mbuf, types[buf[52]], id, cbl); + else + printk(KERN_INFO "%d: %-6s %-8s Volume: %1d %s %s\n", + n, mbuf, types[buf[52]], buf[53], id, cbl); + if (buf[125] < 100) + printk(KERN_INFO "%d: Rebuilding: %d%%\n", n, buf[125]); +} + +/** + * it821x_firmware_command - issue firmware command + * @ap: IT821x port to interrogate + * @cmd: command + * @len: length + * + * Issue firmware commands expecting data back from the controller. We + * use this to issue commands that do not go via the normal paths. Other + * commands such as 0xFC can be issued normally. + */ + +static u8 *it821x_firmware_command(struct ata_port *ap, u8 cmd, int len) +{ + u8 status; + int n = 0; + u16 *buf = kmalloc(len, GFP_KERNEL); + if (buf == NULL) { + printk(KERN_ERR "it821x_firmware_command: Out of memory\n"); + return NULL; + } + /* This isn't quite a normal ATA command as we are talking to the + firmware not the drives */ + ap->ctl |= ATA_NIEN; + iowrite8(ap->ctl, ap->ioaddr.ctl_addr); + ata_wait_idle(ap); + iowrite8(ATA_DEVICE_OBS, ap->ioaddr.device_addr); + iowrite8(cmd, ap->ioaddr.command_addr); + udelay(1); + /* This should be almost immediate but a little paranoia goes a long + way. */ + while(n++ < 10) { + status = ioread8(ap->ioaddr.status_addr); + if (status & ATA_ERR) { + kfree(buf); + printk(KERN_ERR "it821x_firmware_command: rejected\n"); + return NULL; + } + if (status & ATA_DRQ) { + ioread16_rep(ap->ioaddr.data_addr, buf, len/2); + return (u8 *)buf; + } + mdelay(1); + } + kfree(buf); + printk(KERN_ERR "it821x_firmware_command: timeout\n"); + return NULL; +} + +/** + * it821x_probe_firmware - firmware reporting/setup + * @ap: IT821x port being probed + * + * Probe the firmware of the controller by issuing firmware command + * 0xFA and analysing the returned data. + */ + +static void it821x_probe_firmware(struct ata_port *ap) +{ + u8 *buf; + int i; + + /* This is a bit ugly as we can't just issue a task file to a device + as this is controller magic */ + + buf = it821x_firmware_command(ap, 0xFA, 512); + + if (buf != NULL) { + printk(KERN_INFO "pata_it821x: Firmware %02X/%02X/%02X%02X\n", + buf[505], + buf[506], + buf[507], + buf[508]); + for (i = 0; i < 4; i++) + it821x_display_disk(i, buf + 128 * i); + kfree(buf); + } +} + + /** * it821x_port_start - port setup @@ -610,6 +756,8 @@ static int it821x_port_start(struct ata_port *ap) /* Long I/O's although allowed in LBA48 space cause the onboard firmware to enter the twighlight zone */ /* No ATAPI DMA in this mode either */ + if (ap->port_no == 0) + it821x_probe_firmware(ap); } /* Pull the current clocks from 0x50 */ if (conf & (1 << (1 + ap->port_no))) @@ -631,96 +779,82 @@ static int it821x_port_start(struct ata_port *ap) return 0; } +/** + * it821x_rdc_cable - Cable detect for RDC1010 + * @ap: port we are checking + * + * Return the RDC1010 cable type. Unlike the IT821x we know how to do + * this and can do host side cable detect + */ + +static int it821x_rdc_cable(struct ata_port *ap) +{ + u16 r40; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + pci_read_config_word(pdev, 0x40, &r40); + if (r40 & (1 << (2 + ap->port_no))) + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; +} + static struct scsi_host_template it821x_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, + ATA_BMDMA_SHT(DRV_NAME), }; static struct ata_port_operations it821x_smart_port_ops = { - .set_mode = it821x_smart_set_mode, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .mode_filter = ata_pci_default_filter, + .inherits = &ata_bmdma_port_ops, - .check_status = ata_check_status, .check_atapi_dma= it821x_check_atapi_dma, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - .dev_config = it821x_dev_config, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .cable_detect = it821x_ident_hack, - - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - - .qc_prep = ata_qc_prep, - .qc_issue = it821x_smart_qc_issue_prot, + .qc_issue = it821x_smart_qc_issue, - .data_xfer = ata_data_xfer, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .irq_on = ata_irq_on, + .cable_detect = ata_cable_80wire, + .set_mode = it821x_smart_set_mode, + .dev_config = it821x_dev_config, + .read_id = it821x_read_id, .port_start = it821x_port_start, }; static struct ata_port_operations it821x_passthru_port_ops = { - .set_piomode = it821x_passthru_set_piomode, - .set_dmamode = it821x_passthru_set_dmamode, - .mode_filter = ata_pci_default_filter, + .inherits = &ata_bmdma_port_ops, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, .check_atapi_dma= it821x_check_atapi_dma, - .dev_select = it821x_passthru_dev_select, + .sff_dev_select = it821x_passthru_dev_select, + .bmdma_start = it821x_passthru_bmdma_start, + .bmdma_stop = it821x_passthru_bmdma_stop, + .qc_issue = it821x_passthru_qc_issue, - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, .cable_detect = ata_cable_unknown, + .set_piomode = it821x_passthru_set_piomode, + .set_dmamode = it821x_passthru_set_dmamode, - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = it821x_passthru_bmdma_start, - .bmdma_stop = it821x_passthru_bmdma_stop, - .bmdma_status = ata_bmdma_status, + .port_start = it821x_port_start, +}; - .qc_prep = ata_qc_prep, - .qc_issue = it821x_passthru_qc_issue_prot, +static struct ata_port_operations it821x_rdc_port_ops = { + .inherits = &ata_bmdma_port_ops, - .data_xfer = ata_data_xfer, + .check_atapi_dma= it821x_check_atapi_dma, + .sff_dev_select = it821x_passthru_dev_select, + .bmdma_start = it821x_passthru_bmdma_start, + .bmdma_stop = it821x_passthru_bmdma_stop, + .qc_issue = it821x_passthru_qc_issue, - .irq_clear = ata_bmdma_irq_clear, - .irq_handler = ata_interrupt, - .irq_on = ata_irq_on, + .cable_detect = it821x_rdc_cable, + .set_piomode = it821x_passthru_set_piomode, + .set_dmamode = it821x_passthru_set_dmamode, .port_start = it821x_port_start, }; static void it821x_disable_raid(struct pci_dev *pdev) { + /* Neither the RDC nor the IT8211 */ + if (pdev->vendor != PCI_VENDOR_ID_ITE || + pdev->device != PCI_DEVICE_ID_ITE_8212) + return; + /* Reset local CPU, and set BIOS not ready */ pci_write_config_byte(pdev, 0x5E, 0x01); @@ -742,54 +876,77 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) u8 conf; static const struct ata_port_info info_smart = { - .sht = &it821x_sht, .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA6, .port_ops = &it821x_smart_port_ops }; static const struct ata_port_info info_passthru = { - .sht = &it821x_sht, .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, .mwdma_mask = 0x07, .udma_mask = ATA_UDMA6, .port_ops = &it821x_passthru_port_ops }; + static const struct ata_port_info info_rdc = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + /* No UDMA */ + .port_ops = &it821x_rdc_port_ops + }; const struct ata_port_info *ppi[] = { NULL, NULL }; static char *mode[2] = { "pass through", "smart" }; + int rc; + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + if (pdev->vendor == PCI_VENDOR_ID_RDC) { + ppi[0] = &info_rdc; + } else { + /* Force the card into bypass mode if so requested */ + if (it8212_noraid) { + printk(KERN_INFO DRV_NAME ": forcing bypass mode.\n"); + it821x_disable_raid(pdev); + } + pci_read_config_byte(pdev, 0x50, &conf); + conf &= 1; - /* Force the card into bypass mode if so requested */ - if (it8212_noraid) { - printk(KERN_INFO DRV_NAME ": forcing bypass mode.\n"); - it821x_disable_raid(pdev); + printk(KERN_INFO DRV_NAME": controller in %s mode.\n", + mode[conf]); + if (conf == 0) + ppi[0] = &info_passthru; + else + ppi[0] = &info_smart; } - pci_read_config_byte(pdev, 0x50, &conf); - conf &= 1; - - printk(KERN_INFO DRV_NAME ": controller in %s mode.\n", mode[conf]); - if (conf == 0) - ppi[0] = &info_passthru; - else - ppi[0] = &info_smart; - - return ata_pci_init_one(pdev, ppi); + return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL); } #ifdef CONFIG_PM static int it821x_reinit_one(struct pci_dev *pdev) { + struct ata_host *host = dev_get_drvdata(&pdev->dev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; /* Resume - turn raid back off if need be */ if (it8212_noraid) it821x_disable_raid(pdev); - return ata_pci_device_resume(pdev); + ata_host_resume(host); + return rc; } #endif static const struct pci_device_id it821x[] = { { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), }, { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), }, + { PCI_VDEVICE(RDC, 0x1010), }, { }, };