X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fata%2Fpata_it8213.c;h=e0c2cc29d0ca93d60b970441ef0d4d54599aced9;hb=7924e4f6519dd5b349ed146fe9fe35206730be67;hp=a769952646e123158ded7705d86851ceaa727287;hpb=de7860c3f3272086a4c3a1b4280b11ffae7c32be;p=linux-2.6

diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index a769952646..e0c2cc29d0 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -19,27 +19,28 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_it8213"
-#define DRV_VERSION	"0.0.2"
+#define DRV_VERSION	"0.0.3"
 
 /**
  *	it8213_pre_reset	-	check for 40/80 pin
- *	@ap: Port
+ *	@link: link
  *	@deadline: deadline jiffies for the operation
  *
  *	Filter out ports by the enable bits before doing the normal reset
  *	and probe.
  */
 
-static int it8213_pre_reset(struct ata_port *ap, unsigned long deadline)
+static int it8213_pre_reset(struct ata_link *link, unsigned long deadline)
 {
 	static const struct pci_bits it8213_enable_bits[] = {
 		{ 0x41U, 1U, 0x80UL, 0x80UL },	/* port 0 */
 	};
+	struct ata_port *ap = link->ap;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	if (!pci_test_config_bits(pdev, &it8213_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	return ata_std_prereset(ap, deadline);
+	return ata_std_prereset(link, deadline);
 }
 
 /**
@@ -127,7 +128,7 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev)
 		idetm_data &= 0xCC0F;
 		idetm_data |= (control << 4);
 
-		/* Slave timing in seperate register */
+		/* Slave timing in separate register */
 		pci_read_config_byte(dev, 0x44, &slave_data);
 		slave_data &= 0xF0;
 		slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << 4;
@@ -260,7 +261,6 @@ static struct scsi_host_template it8213_sht = {
 };
 
 static const struct ata_port_operations it8213_ops = {
-	.port_disable		= ata_port_disable,
 	.set_piomode		= it8213_set_piomode,
 	.set_dmamode		= it8213_set_dmamode,
 	.mode_filter		= ata_pci_default_filter,
@@ -288,9 +288,8 @@ static const struct ata_port_operations it8213_ops = {
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
-	.irq_ack		= ata_irq_ack,
 
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 };
 
 
@@ -313,10 +312,10 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.sht		= &it8213_sht,
-		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask 	= 0x1f, /* UDMA 100 */
+		.udma_mask 	= ATA_UDMA4, /* FIXME: want UDMA 100? */
 		.port_ops	= &it8213_ops,
 	};
 	/* Current IT8213 stuff is single port */