X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Fx86%2Fpci%2Fmmconfig-shared.c;h=8d54df4dfaad551518bcbf77cbe0be20d0f36562;hb=0eccf60bfa9190d1588b2bf07d23d7b9b3a19d9e;hp=4df637e34f813da1e47839c75d9cd3fc502bc560;hpb=e86908614f2c7fec401827e5cefd7a6ea9407f85;p=linux-2.6

diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 4df637e34f..8d54df4dfa 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -22,46 +22,13 @@
 #define MMCONFIG_APER_MIN	(2 * 1024*1024)
 #define MMCONFIG_APER_MAX	(256 * 1024*1024)
 
-DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS);
-
 /* Indicate if the mmcfg resources have been placed into the resource table. */
 static int __initdata pci_mmcfg_resources_inserted;
 
-/* K8 systems have some devices (typically in the builtin northbridge)
-   that are only accessible using type1
-   Normally this can be expressed in the MCFG by not listing them
-   and assigning suitable _SEGs, but this isn't implemented in some BIOS.
-   Instead try to discover all devices on bus 0 that are unreachable using MM
-   and fallback for them. */
-static void __init unreachable_devices(void)
-{
-	int i, bus;
-	/* Use the max bus number from ACPI here? */
-	for (bus = 0; bus < PCI_MMCFG_MAX_CHECK_BUS; bus++) {
-		for (i = 0; i < 32; i++) {
-			unsigned int devfn = PCI_DEVFN(i, 0);
-			u32 val1, val2;
-
-			pci_conf1_read(0, bus, devfn, 0, 4, &val1);
-			if (val1 == 0xffffffff)
-				continue;
-
-			if (pci_mmcfg_arch_reachable(0, bus, devfn)) {
-				raw_pci_ops->read(0, bus, devfn, 0, 4, &val2);
-				if (val1 == val2)
-					continue;
-			}
-			set_bit(i + 32 * bus, pci_mmcfg_fallback_slots);
-			printk(KERN_NOTICE "PCI: No mmconfig possible on device"
-			       " %02x:%02x\n", bus, i);
-		}
-	}
-}
-
 static const char __init *pci_mmcfg_e7520(void)
 {
 	u32 win;
-	pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0xce, 2, &win);
+	pci_direct_conf1.read(0, 0, PCI_DEVFN(0,0), 0xce, 2, &win);
 
 	win = win & 0xf000;
 	if(win == 0x0000 || win == 0xf000)
@@ -86,7 +53,7 @@ static const char __init *pci_mmcfg_intel_945(void)
 
 	pci_mmcfg_config_num = 1;
 
-	pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0x48, 4, &pciexbar);
+	pci_direct_conf1.read(0, 0, PCI_DEVFN(0,0), 0x48, 4, &pciexbar);
 
 	/* Enable bit */
 	if (!(pciexbar & 1))
@@ -151,7 +118,7 @@ static int __init pci_mmcfg_check_hostbridge(void)
 	int i;
 	const char *name;
 
-	pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0, 4, &l);
+	pci_direct_conf1.read(0, 0, PCI_DEVFN(0,0), 0, 4, &l);
 	vendor = l & 0xffff;
 	device = (l >> 16) & 0xffff;
 
@@ -270,8 +237,6 @@ void __init pci_mmcfg_init(int type)
 		return;
 
 	if (pci_mmcfg_arch_init()) {
-		if (type == 1)
-			unreachable_devices();
 		if (known_bridge)
 			pci_mmcfg_insert_resources(IORESOURCE_BUSY);
 		pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;