X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Fx86%2Fkernel%2Fsmpboot_32.c;h=e82eeb2fdfefde6b33cfc4dec68ac2b3353868b6;hb=cb3c8b9003f15efa4a750a32d2d602d40cc45d5a;hp=bd2f8863efa2a01c199bac17369ec00233c2cb44;hpb=e481fcf8563d300e7f8875cae5fdc41941d29de0;p=linux-2.6 diff --git a/arch/x86/kernel/smpboot_32.c b/arch/x86/kernel/smpboot_32.c index bd2f8863ef..e82eeb2fdf 100644 --- a/arch/x86/kernel/smpboot_32.c +++ b/arch/x86/kernel/smpboot_32.c @@ -74,119 +74,18 @@ EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid); u8 apicid_2_node[MAX_APICID]; -static void map_cpu_to_logical_apicid(void); +extern void map_cpu_to_logical_apicid(void); +extern void unmap_cpu_to_logical_apicid(int cpu); /* State of each CPU. */ DEFINE_PER_CPU(int, cpu_state) = { 0 }; -/* Store all idle threads, this can be reused instead of creating -* a new thread. Also avoids complicated thread destroy functionality -* for idle threads. -*/ -#ifdef CONFIG_HOTPLUG_CPU -/* - * Needed only for CONFIG_HOTPLUG_CPU because __cpuinitdata is - * removed after init for !CONFIG_HOTPLUG_CPU. - */ -static DEFINE_PER_CPU(struct task_struct *, idle_thread_array); -#define get_idle_for_cpu(x) (per_cpu(idle_thread_array, x)) -#define set_idle_for_cpu(x, p) (per_cpu(idle_thread_array, x) = (p)) -#else -struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ; -#define get_idle_for_cpu(x) (idle_thread_array[(x)]) -#define set_idle_for_cpu(x, p) (idle_thread_array[(x)] = (p)) -#endif - -static atomic_t init_deasserted; - -static void __cpuinit smp_callin(void) -{ - int cpuid, phys_id; - unsigned long timeout; - - /* - * If waken up by an INIT in an 82489DX configuration - * we may get here before an INIT-deassert IPI reaches - * our local APIC. We have to wait for the IPI or we'll - * lock up on an APIC access. - */ - wait_for_init_deassert(&init_deasserted); - - /* - * (This works even if the APIC is not enabled.) - */ - phys_id = GET_APIC_ID(apic_read(APIC_ID)); - cpuid = smp_processor_id(); - if (cpu_isset(cpuid, cpu_callin_map)) { - printk("huh, phys CPU#%d, CPU#%d already present??\n", - phys_id, cpuid); - BUG(); - } - Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id); - - /* - * STARTUP IPIs are fragile beasts as they might sometimes - * trigger some glue motherboard logic. Complete APIC bus - * silence for 1 second, this overestimates the time the - * boot CPU is spending to send the up to 2 STARTUP IPIs - * by a factor of two. This should be enough. - */ - - /* - * Waiting 2s total for startup (udelay is not yet working) - */ - timeout = jiffies + 2*HZ; - while (time_before(jiffies, timeout)) { - /* - * Has the boot CPU finished it's STARTUP sequence? - */ - if (cpu_isset(cpuid, cpu_callout_map)) - break; - cpu_relax(); - } - - if (!time_before(jiffies, timeout)) { - printk("BUG: CPU%d started up but did not get a callout!\n", - cpuid); - BUG(); - } - - /* - * the boot CPU has finished the init stage and is spinning - * on callin_map until we finish. We are free to set up this - * CPU, first the APIC. (this is probably redundant on most - * boards) - */ - - Dprintk("CALLIN, before setup_local_APIC().\n"); - smp_callin_clear_local_apic(); - setup_local_APIC(); - end_local_APIC_setup(); - map_cpu_to_logical_apicid(); - - /* - * Get our bogomips. - */ - local_irq_enable(); - calibrate_delay(); - local_irq_disable(); - Dprintk("Stack at about %p\n",&cpuid); - - /* - * Save our processor parameters - */ - smp_store_cpu_info(cpuid); - - /* - * Allow the master to continue. - */ - cpu_set(cpuid, cpu_callin_map); -} +extern void smp_callin(void); /* * Activate a secondary processor. */ -static void __cpuinit start_secondary(void *unused) +void __cpuinit start_secondary(void *unused) { /* * Don't put *anything* before cpu_init(), SMP booting is too @@ -256,435 +155,6 @@ void __devinit initialize_secondary(void) :"m" (current->thread.sp),"m" (current->thread.ip)); } -/* Static state in head.S used to set up a CPU */ -extern struct { - void * sp; - unsigned short ss; -} stack_start; - -#ifdef CONFIG_NUMA - -/* which logical CPUs are on which nodes */ -cpumask_t node_to_cpumask_map[MAX_NUMNODES] __read_mostly = - { [0 ... MAX_NUMNODES-1] = CPU_MASK_NONE }; -EXPORT_SYMBOL(node_to_cpumask_map); -/* which node each logical CPU is on */ -int cpu_to_node_map[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = 0 }; -EXPORT_SYMBOL(cpu_to_node_map); - -/* set up a mapping between cpu and node. */ -static inline void map_cpu_to_node(int cpu, int node) -{ - printk("Mapping cpu %d to node %d\n", cpu, node); - cpu_set(cpu, node_to_cpumask_map[node]); - cpu_to_node_map[cpu] = node; -} - -/* undo a mapping between cpu and node. */ -static inline void unmap_cpu_to_node(int cpu) -{ - int node; - - printk("Unmapping cpu %d from all nodes\n", cpu); - for (node = 0; node < MAX_NUMNODES; node ++) - cpu_clear(cpu, node_to_cpumask_map[node]); - cpu_to_node_map[cpu] = 0; -} -#else /* !CONFIG_NUMA */ - -#define map_cpu_to_node(cpu, node) ({}) -#define unmap_cpu_to_node(cpu) ({}) - -#endif /* CONFIG_NUMA */ - -u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; - -static void map_cpu_to_logical_apicid(void) -{ - int cpu = smp_processor_id(); - int apicid = logical_smp_processor_id(); - int node = apicid_to_node(apicid); - - if (!node_online(node)) - node = first_online_node; - - cpu_2_logical_apicid[cpu] = apicid; - map_cpu_to_node(cpu, node); -} - -static void unmap_cpu_to_logical_apicid(int cpu) -{ - cpu_2_logical_apicid[cpu] = BAD_APICID; - unmap_cpu_to_node(cpu); -} - -static inline void __inquire_remote_apic(int apicid) -{ - unsigned i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 }; - char *names[] = { "ID", "VERSION", "SPIV" }; - int timeout; - u32 status; - - printk(KERN_INFO "Inquiring remote APIC #%d...\n", apicid); - - for (i = 0; i < ARRAY_SIZE(regs); i++) { - printk(KERN_INFO "... APIC #%d %s: ", apicid, names[i]); - - /* - * Wait for idle. - */ - status = safe_apic_wait_icr_idle(); - if (status) - printk(KERN_CONT - "a previous APIC delivery may have failed\n"); - - apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); - apic_write_around(APIC_ICR, APIC_DM_REMRD | regs[i]); - - timeout = 0; - do { - udelay(100); - status = apic_read(APIC_ICR) & APIC_ICR_RR_MASK; - } while (status == APIC_ICR_RR_INPROG && timeout++ < 1000); - - switch (status) { - case APIC_ICR_RR_VALID: - status = apic_read(APIC_RRR); - printk(KERN_CONT "%08x\n", status); - break; - default: - printk(KERN_CONT "failed\n"); - } - } -} - -#ifdef WAKE_SECONDARY_VIA_NMI -/* - * Poke the other CPU in the eye via NMI to wake it up. Remember that the normal - * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this - * won't ... remember to clear down the APIC, etc later. - */ -static int __devinit -wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip) -{ - unsigned long send_status, accept_status = 0; - int maxlvt; - - /* Target chip */ - apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid)); - - /* Boot on the stack */ - /* Kick the second */ - apic_write_around(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL); - - Dprintk("Waiting for send to finish...\n"); - send_status = safe_apic_wait_icr_idle(); - - /* - * Give the other CPU some time to accept the IPI. - */ - udelay(200); - /* - * Due to the Pentium erratum 3AP. - */ - maxlvt = lapic_get_maxlvt(); - if (maxlvt > 3) { - apic_read_around(APIC_SPIV); - apic_write(APIC_ESR, 0); - } - accept_status = (apic_read(APIC_ESR) & 0xEF); - Dprintk("NMI sent.\n"); - - if (send_status) - printk("APIC never delivered???\n"); - if (accept_status) - printk("APIC delivery error (%lx).\n", accept_status); - - return (send_status | accept_status); -} -#endif /* WAKE_SECONDARY_VIA_NMI */ - -#ifdef WAKE_SECONDARY_VIA_INIT -static int __devinit -wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) -{ - unsigned long send_status, accept_status = 0; - int maxlvt, num_starts, j; - - /* - * Be paranoid about clearing APIC errors. - */ - if (APIC_INTEGRATED(apic_version[phys_apicid])) { - apic_read_around(APIC_SPIV); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); - } - - Dprintk("Asserting INIT.\n"); - - /* - * Turn INIT on target chip - */ - apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); - - /* - * Send IPI - */ - apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT - | APIC_DM_INIT); - - Dprintk("Waiting for send to finish...\n"); - send_status = safe_apic_wait_icr_idle(); - - mdelay(10); - - Dprintk("Deasserting INIT.\n"); - - /* Target chip */ - apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); - - /* Send IPI */ - apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT); - - Dprintk("Waiting for send to finish...\n"); - send_status = safe_apic_wait_icr_idle(); - - mb(); - atomic_set(&init_deasserted, 1); - - /* - * Should we send STARTUP IPIs ? - * - * Determine this based on the APIC version. - * If we don't have an integrated APIC, don't send the STARTUP IPIs. - */ - if (APIC_INTEGRATED(apic_version[phys_apicid])) - num_starts = 2; - else - num_starts = 0; - - /* - * Paravirt / VMI wants a startup IPI hook here to set up the - * target processor state. - */ - startup_ipi_hook(phys_apicid, (unsigned long) start_secondary, - (unsigned long) stack_start.sp); - - /* - * Run STARTUP IPI loop. - */ - Dprintk("#startup loops: %d.\n", num_starts); - - maxlvt = lapic_get_maxlvt(); - - for (j = 1; j <= num_starts; j++) { - Dprintk("Sending STARTUP #%d.\n",j); - apic_read_around(APIC_SPIV); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); - Dprintk("After apic_write.\n"); - - /* - * STARTUP IPI - */ - - /* Target chip */ - apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); - - /* Boot on the stack */ - /* Kick the second */ - apic_write_around(APIC_ICR, APIC_DM_STARTUP - | (start_eip >> 12)); - - /* - * Give the other CPU some time to accept the IPI. - */ - udelay(300); - - Dprintk("Startup point 1.\n"); - - Dprintk("Waiting for send to finish...\n"); - send_status = safe_apic_wait_icr_idle(); - - /* - * Give the other CPU some time to accept the IPI. - */ - udelay(200); - /* - * Due to the Pentium erratum 3AP. - */ - if (maxlvt > 3) { - apic_read_around(APIC_SPIV); - apic_write(APIC_ESR, 0); - } - accept_status = (apic_read(APIC_ESR) & 0xEF); - if (send_status || accept_status) - break; - } - Dprintk("After Startup.\n"); - - if (send_status) - printk("APIC never delivered???\n"); - if (accept_status) - printk("APIC delivery error (%lx).\n", accept_status); - - return (send_status | accept_status); -} -#endif /* WAKE_SECONDARY_VIA_INIT */ - -extern cpumask_t cpu_initialized; - -struct create_idle { - struct work_struct work; - struct task_struct *idle; - struct completion done; - int cpu; -}; - -static void __cpuinit do_fork_idle(struct work_struct *work) -{ - struct create_idle *c_idle = - container_of(work, struct create_idle, work); - - c_idle->idle = fork_idle(c_idle->cpu); - complete(&c_idle->done); -} -static int __cpuinit do_boot_cpu(int apicid, int cpu) -/* - * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad - * (ie clustered apic addressing mode), this is a LOGICAL apic ID. - * Returns zero if CPU booted OK, else error code from wakeup_secondary_cpu. - */ -{ - unsigned long boot_error; - int timeout; - unsigned long start_eip; - unsigned short nmi_high = 0, nmi_low = 0; - struct create_idle c_idle = { - .cpu = cpu, - .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done), - }; - INIT_WORK(&c_idle.work, do_fork_idle); - - /* - * Save current MTRR state in case it was changed since early boot - * (e.g. by the ACPI SMI) to initialize new CPUs with MTRRs in sync: - */ - mtrr_save_state(); - - c_idle.idle = get_idle_for_cpu(cpu); - - /* - * We can't use kernel_thread since we must avoid to - * reschedule the child. - */ - if (c_idle.idle) { - c_idle.idle->thread.sp = (unsigned long) (((struct pt_regs *) - (THREAD_SIZE + task_stack_page(c_idle.idle))) - 1); - init_idle(c_idle.idle, cpu); - goto do_rest; - } - - if (!keventd_up() || current_is_keventd()) - c_idle.work.func(&c_idle.work); - else { - schedule_work(&c_idle.work); - wait_for_completion(&c_idle.done); - } - - if (IS_ERR(c_idle.idle)) { - printk(KERN_ERR "failed fork for CPU %d\n", cpu); - return PTR_ERR(c_idle.idle); - } - - set_idle_for_cpu(cpu, c_idle.idle); -do_rest: - per_cpu(current_task, cpu) = c_idle.idle; - init_gdt(cpu); - early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu); - - c_idle.idle->thread.ip = (unsigned long) start_secondary; - /* start_eip had better be page-aligned! */ - start_eip = setup_trampoline(); - - alternatives_smp_switch(1); - - /* So we see what's up */ - printk("Booting processor %d/%d ip %lx\n", cpu, apicid, start_eip); - /* Stack for startup_32 can be just as for start_secondary onwards */ - stack_start.sp = (void *) c_idle.idle->thread.sp; - - irq_ctx_init(cpu); - - /* - * This grunge runs the startup process for - * the targeted processor. - */ - - atomic_set(&init_deasserted, 0); - - Dprintk("Setting warm reset code and vector.\n"); - - store_NMI_vector(&nmi_high, &nmi_low); - - smpboot_setup_warm_reset_vector(start_eip); - - /* - * Starting actual IPI sequence... - */ - boot_error = wakeup_secondary_cpu(apicid, start_eip); - - if (!boot_error) { - /* - * allow APs to start initializing. - */ - Dprintk("Before Callout %d.\n", cpu); - cpu_set(cpu, cpu_callout_map); - Dprintk("After Callout %d.\n", cpu); - - /* - * Wait 5s total for a response - */ - for (timeout = 0; timeout < 50000; timeout++) { - if (cpu_isset(cpu, cpu_callin_map)) - break; /* It has booted */ - udelay(100); - } - - if (cpu_isset(cpu, cpu_callin_map)) { - /* number CPUs logically, starting from 1 (BSP is 0) */ - Dprintk("OK.\n"); - printk("CPU%d: ", cpu); - print_cpu_info(&cpu_data(cpu)); - Dprintk("CPU has booted.\n"); - } else { - boot_error= 1; - if (*((volatile unsigned char *)trampoline_base) - == 0xA5) - /* trampoline started but...? */ - printk("Stuck ??\n"); - else - /* trampoline code not run */ - printk("Not responding.\n"); - inquire_remote_apic(apicid); - } - } - - if (boot_error) { - /* Try to put things back the way they were before ... */ - unmap_cpu_to_logical_apicid(cpu); - cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */ - cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */ - cpu_clear(cpu, cpu_possible_map); - per_cpu(x86_cpu_to_apicid, cpu) = BAD_APICID; - } - - /* mark "stuck" area as not stuck */ - *((volatile unsigned long *)trampoline_base) = 0; - - return boot_error; -} - #ifdef CONFIG_HOTPLUG_CPU void cpu_exit_clear(void) { @@ -702,20 +172,6 @@ void cpu_exit_clear(void) } #endif -static void __cpuinit __smp_prepare_cpu(int cpu) -{ - int apicid; - - apicid = per_cpu(x86_cpu_to_apicid, cpu); - - /* init low mem mapping */ - clone_pgd_range(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS, - min_t(unsigned long, KERNEL_PGD_PTRS, USER_PGD_PTRS)); - flush_tlb_all(); - - do_boot_cpu(apicid, cpu); -} - static int boot_cpu_logical_apicid; /* Where the IO area was mapped on multiquad, always 0 otherwise */ void *xquad_portio; @@ -849,48 +305,6 @@ void __init native_smp_prepare_boot_cpu(void) __get_cpu_var(cpu_state) = CPU_ONLINE; } -int __cpuinit native_cpu_up(unsigned int cpu) -{ - int apicid = cpu_present_to_apicid(cpu); - unsigned long flags; - - WARN_ON(irqs_disabled()); - - Dprintk("++++++++++++++++++++=_---CPU UP %u\n", cpu); - - if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid || - !physid_isset(apicid, phys_cpu_present_map)) { - printk(KERN_ERR "%s: bad cpu %d\n", __func__, cpu); - return -EINVAL; - } - - per_cpu(cpu_state, cpu) = CPU_UP_PREPARE; - - __smp_prepare_cpu(cpu); - - /* In case one didn't come up */ - if (!cpu_isset(cpu, cpu_callin_map)) { - printk(KERN_DEBUG "skipping cpu%d, didn't come online\n", cpu); - return -EIO; - } - - - /* - * Check TSC synchronization with the AP (keep irqs disabled - * while doing so): - */ - local_irq_save(flags); - check_tsc_sync_source(cpu); - local_irq_restore(flags); - - while (!cpu_isset(cpu, cpu_online_map)) { - cpu_relax(); - touch_nmi_watchdog(); - } - - return 0; -} - extern void impress_friends(void); extern void smp_checks(void);