X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Fx86%2Fkernel%2Fcpu%2Fcyrix.c;h=e710a21bb6e8dc0dd9d83a7bd49df69135cbcf7b;hb=358c323c17ac527b82c6333db6a485112c21ab0d;hp=404a6a2d4016c790c6457b966703f8ebdc669dc2;hpb=d145c7253c8cb2ed8a75a8839621b0bb8f778820;p=linux-2.6 diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c index 404a6a2d40..e710a21bb6 100644 --- a/arch/x86/kernel/cpu/cyrix.c +++ b/arch/x86/kernel/cpu/cyrix.c @@ -19,7 +19,7 @@ static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) { unsigned char ccr2, ccr3; unsigned long flags; - + /* we test for DEVID by checking whether CCR3 is writable */ local_irq_save(flags); ccr3 = getCx86(CX86_CCR3); @@ -37,8 +37,7 @@ static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) setCx86(CX86_CCR2, ccr2); *dir0 = 0xfe; } - } - else { + } else { setCx86(CX86_CCR3, ccr3); /* restore CCR3 */ /* read DIR0 and DIR1 CPU registers */ @@ -83,12 +82,10 @@ static char cyrix_model_mult2[] __cpuinitdata = "12233445"; * FIXME: our newer udelay uses the tsc. We don't need to frob with SLOP */ -extern void calibrate_delay(void) __init; - static void __cpuinit check_cx686_slop(struct cpuinfo_x86 *c) { unsigned long flags; - + if (Cx86_dir0_msb == 3) { unsigned char ccr3, ccr5; @@ -134,24 +131,7 @@ static void __cpuinit set_cx86_memwb(void) /* set 'Not Write-through' */ write_cr0(read_cr0() | X86_CR0_NW); /* CCR2 bit 2: lock NW bit and set WT1 */ - setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14 ); -} - -static void __cpuinit set_cx86_inc(void) -{ - unsigned char ccr3; - - printk(KERN_INFO "Enable Incrementor on Cyrix/NSC processor.\n"); - - ccr3 = getCx86(CX86_CCR3); - setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ - /* PCR1 -- Performance Control */ - /* Incrementor on, whatever that is */ - setCx86(CX86_PCR1, getCx86(CX86_PCR1) | 0x02); - /* PCR0 -- Performance Control */ - /* Incrementor Margin 10 */ - setCx86(CX86_PCR0, getCx86(CX86_PCR0) | 0x04); - setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ + setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14); } /* @@ -169,16 +149,15 @@ static void __cpuinit geode_configure(void) ccr3 = getCx86(CX86_CCR3); setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ - + /* FPU fast, DTE cache, Mem bypass */ setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38); setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ - + set_cx86_memwb(); - set_cx86_reorder(); - set_cx86_inc(); - + set_cx86_reorder(); + local_irq_restore(flags); } @@ -189,14 +168,16 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) char *buf = c->x86_model_id; const char *p = NULL; - /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; - 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ - clear_bit(0*32+31, c->x86_capability); + /* + * Bit 31 in normal CPUID used for nonstandard 3DNow ID; + * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway + */ + clear_cpu_cap(c, 0*32+31); /* Cyrix used bit 24 in extended (AMD) CPUID for Cyrix MMX extensions */ - if ( test_bit(1*32+24, c->x86_capability) ) { - clear_bit(1*32+24, c->x86_capability); - set_bit(X86_FEATURE_CXMMX, c->x86_capability); + if (test_cpu_cap(c, 1*32+24)) { + clear_cpu_cap(c, 1*32+24); + set_cpu_cap(c, X86_FEATURE_CXMMX); } do_cyrix_devid(&dir0, &dir1); @@ -215,7 +196,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) * the model, multiplier and stepping. Black magic included, * to make the silicon step/rev numbers match the printed ones. */ - + switch (dir0_msn) { unsigned char tmp; @@ -243,7 +224,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) } else /* 686 */ p = Cx86_cb+1; /* Emulate MTRRs using Cyrix's ARRs. */ - set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability); + set_cpu_cap(c, X86_FEATURE_CYRIX_ARR); /* 6x86's contain this bug */ c->coma_bug = 1; break; @@ -252,17 +233,18 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) #ifdef CONFIG_PCI { u32 vendor, device; - /* It isn't really a PCI quirk directly, but the cure is the - same. The MediaGX has deep magic SMM stuff that handles the - SB emulation. It throws away the fifo on disable_dma() which - is wrong and ruins the audio. - - Bug2: VSA1 has a wrap bug so that using maximum sized DMA - causes bad things. According to NatSemi VSA2 has another - bug to do with 'hlt'. I've not seen any boards using VSA2 - and X doesn't seem to support it either so who cares 8). - VSA1 we work around however. - */ + /* + * It isn't really a PCI quirk directly, but the cure is the + * same. The MediaGX has deep magic SMM stuff that handles the + * SB emulation. It throws away the fifo on disable_dma() which + * is wrong and ruins the audio. + * + * Bug2: VSA1 has a wrap bug so that using maximum sized DMA + * causes bad things. According to NatSemi VSA2 has another + * bug to do with 'hlt'. I've not seen any boards using VSA2 + * and X doesn't seem to support it either so who cares 8). + * VSA1 we work around however. + */ printk(KERN_INFO "Working around Cyrix MediaGX virtual DMA bugs.\n"); isa_dma_bridge_buggy = 2; @@ -275,55 +257,51 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) /* * The 5510/5520 companion chips have a funky PIT. - */ + */ if (vendor == PCI_VENDOR_ID_CYRIX && (device == PCI_DEVICE_ID_CYRIX_5510 || device == PCI_DEVICE_ID_CYRIX_5520)) mark_tsc_unstable("cyrix 5510/5520 detected"); } #endif - c->x86_cache_size=16; /* Yep 16K integrated cache thats it */ + c->x86_cache_size = 16; /* Yep 16K integrated cache thats it */ /* GXm supports extended cpuid levels 'ala' AMD */ if (c->cpuid_level == 2) { /* Enable cxMMX extensions (GX1 Datasheet 54) */ setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1); - + /* * GXm : 0x30 ... 0x5f GXm datasheet 51 * GXlv: 0x6x GXlv datasheet 54 * ? : 0x7x * GX1 : 0x8x GX1 datasheet 56 */ - if((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <=dir1 && dir1 <= 0x8f)) + if ((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <= dir1 && dir1 <= 0x8f)) geode_configure(); get_model_name(c); /* get CPU marketing name */ return; - } - else { /* MediaGX */ + } else { /* MediaGX */ Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4'; p = Cx86_cb+2; c->x86_model = (dir1 & 0x20) ? 1 : 2; } break; - case 5: /* 6x86MX/M II */ - if (dir1 > 7) - { + case 5: /* 6x86MX/M II */ + if (dir1 > 7) { dir0_msn++; /* M II */ /* Enable MMX extensions (App note 108) */ setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1); - } - else - { + } else { c->coma_bug = 1; /* 6x86MX, it has the bug. */ } tmp = (!(dir0_lsn & 7) || dir0_lsn & 1) ? 2 : 0; Cx86_cb[tmp] = cyrix_model_mult2[dir0_lsn & 7]; p = Cx86_cb+tmp; - if (((dir1 & 0x0f) > 4) || ((dir1 & 0xf0) == 0x20)) + if (((dir1 & 0x0f) > 4) || ((dir1 & 0xf0) == 0x20)) (c->x86_model)++; /* Emulate MTRRs using Cyrix's ARRs. */ - set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability); + set_cpu_cap(c, X86_FEATURE_CYRIX_ARR); break; case 0xf: /* Cyrix 486 without DEVID registers */ @@ -345,7 +323,8 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) break; } strcpy(buf, Cx86_model[dir0_msn & 7]); - if (p) strcat(buf, p); + if (p) + strcat(buf, p); return; } @@ -354,7 +333,8 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) */ static void __cpuinit init_nsc(struct cpuinfo_x86 *c) { - /* There may be GX1 processors in the wild that are branded + /* + * There may be GX1 processors in the wild that are branded * NSC and not Cyrix. * * This function only handles the GX processor, and kicks every @@ -379,7 +359,7 @@ static void __cpuinit init_nsc(struct cpuinfo_x86 *c) * by the fact that they preserve the flags across the division of 5/2. * PII and PPro exhibit this behavior too, but they have cpuid available. */ - + /* * Perform the Cyrix 5/2 test. A Cyrix won't change * the flags, while other 486 chips will. @@ -400,27 +380,26 @@ static inline int test_cyrix_52div(void) return (unsigned char) (test >> 8) == 0x02; } -static void __cpuinit cyrix_identify(struct cpuinfo_x86 * c) +static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c) { /* Detect Cyrix with disabled CPUID */ - if ( c->x86 == 4 && test_cyrix_52div() ) { + if (c->x86 == 4 && test_cyrix_52div()) { unsigned char dir0, dir1; - + strcpy(c->x86_vendor_id, "CyrixInstead"); - c->x86_vendor = X86_VENDOR_CYRIX; - - /* Actually enable cpuid on the older cyrix */ - - /* Retrieve CPU revisions */ - + c->x86_vendor = X86_VENDOR_CYRIX; + + /* Actually enable cpuid on the older cyrix */ + + /* Retrieve CPU revisions */ + do_cyrix_devid(&dir0, &dir1); - dir0>>=4; - + dir0 >>= 4; + /* Check it is an affected model */ - - if (dir0 == 5 || dir0 == 3) - { + + if (dir0 == 5 || dir0 == 3) { unsigned char ccr3; unsigned long flags; printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n"); @@ -436,26 +415,17 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 * c) static struct cpu_dev cyrix_cpu_dev __cpuinitdata = { .c_vendor = "Cyrix", - .c_ident = { "CyrixInstead" }, + .c_ident = { "CyrixInstead" }, .c_init = init_cyrix, .c_identify = cyrix_identify, }; -int __init cyrix_init_cpu(void) -{ - cpu_devs[X86_VENDOR_CYRIX] = &cyrix_cpu_dev; - return 0; -} +cpu_vendor_dev_register(X86_VENDOR_CYRIX, &cyrix_cpu_dev); static struct cpu_dev nsc_cpu_dev __cpuinitdata = { .c_vendor = "NSC", - .c_ident = { "Geode by NSC" }, + .c_ident = { "Geode by NSC" }, .c_init = init_nsc, }; -int __init nsc_init_cpu(void) -{ - cpu_devs[X86_VENDOR_NSC] = &nsc_cpu_dev; - return 0; -} - +cpu_vendor_dev_register(X86_VENDOR_NSC, &nsc_cpu_dev);