X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Fx86%2FKconfig;h=7dc46ba26fbf56c8ab0bb152ab42f126d8f62bfb;hb=58cf35228fec541418cc3bd781d6c069d904815e;hp=e0edaaa6920af63832979a04d4f525acafe64e8a;hpb=919c0d14ae93073a3957c018a6d86ceb1e2e454b;p=linux-2.6

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index e0edaaa692..7dc46ba26f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -251,7 +251,7 @@ config X86_ELAN
 
 config X86_VOYAGER
 	bool "Voyager (NCR)"
-	depends on X86_32 && (SMP || BROKEN)
+	depends on X86_32 && (SMP || BROKEN) && !PCI
 	help
 	  Voyager is an MCA-based 32-way capable SMP architecture proprietary
 	  to NCR Corp.  Machine classes 345x/35xx/4100/51xx are Voyager-based.
@@ -263,7 +263,7 @@ config X86_VOYAGER
 
 config X86_NUMAQ
 	bool "NUMAQ (IBM/Sequent)"
-	depends on SMP && X86_32
+	depends on SMP && X86_32 && PCI
 	select NUMA
 	help
 	  This option is used for getting Linux to run on a (IBM/Sequent) NUMA
@@ -293,7 +293,7 @@ config X86_BIGSMP
 
 config X86_VISWS
 	bool "SGI 320/540 (Visual Workstation)"
-	depends on X86_32
+	depends on X86_32 && !PCI
 	help
 	  The SGI Visual Workstation series is an IA32-based workstation
 	  based on SGI systems chips with some legacy PC hardware attached.
@@ -337,7 +337,7 @@ config X86_RDC321X
 config X86_VSMP
 	bool "Support for ScaleMP vSMP"
 	select PARAVIRT
-	depends on X86_64
+	depends on X86_64 && !PCI
 	help
 	  Support for ScaleMP vSMP systems.  Say 'Y' here if this kernel is
 	  supposed to run on these EM64T-based machines.  Only choose this option
@@ -417,35 +417,19 @@ config PARAVIRT_CLOCK
 
 endif
 
-config MEMTEST_BOOTPARAM
-	bool "Memtest boot parameter"
+config MEMTEST
+	bool "Memtest"
 	depends on X86_64
 	default y
 	help
 	  This option adds a kernel parameter 'memtest', which allows memtest
-	  to be disabled at boot.  If this option is selected, memtest
-	  functionality can be disabled with memtest=0 on the kernel
-	  command line.  The purpose of this option is to allow a single
-	  kernel image to be distributed with memtest built in, but not
-	  necessarily enabled.
-
+	  to be set.
+		memtest=0, mean disabled; -- default
+		memtest=1, mean do 1 test pattern;
+		...
+		memtest=4, mean do 4 test patterns.
 	  If you are unsure how to answer this question, answer Y.
 
-config MEMTEST_BOOTPARAM_VALUE
-	int "Memtest boot parameter default value (0-4)"
-	depends on MEMTEST_BOOTPARAM
-	range 0 4
-	default 0
-	help
-	  This option sets the default value for the kernel parameter
-	  'memtest', which allows memtest to be disabled at boot.  If this
-	  option is set to 0 (zero), the memtest kernel parameter will
-	  default to 0, disabling memtest at bootup.  If this option is
-	  set to 4, the memtest kernel parameter will default to 4,
-	  enabling memtest at bootup, and use that as pattern number.
-
-	  If you are unsure how to answer this question, answer 0.
-
 config ACPI_SRAT
 	def_bool y
 	depends on X86_32 && ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH)
@@ -549,6 +533,21 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT
 	  Calgary anyway, pass 'iommu=calgary' on the kernel command line.
 	  If unsure, say Y.
 
+config AMD_IOMMU
+	bool "AMD IOMMU support"
+	select SWIOTLB
+	depends on X86_64 && PCI && ACPI
+	help
+	  With this option you can enable support for AMD IOMMU hardware in
+	  your system. An IOMMU is a hardware component which provides
+	  remapping of DMA memory accesses from devices. With an AMD IOMMU you
+	  can isolate the the DMA memory of different devices and protect the
+	  system from misbehaving device drivers or hardware.
+
+	  You can find out if your system has an AMD IOMMU if you look into
+	  your BIOS for an option to enable it or if you have an IVRS ACPI
+	  table.
+
 # need this always selected by IOMMU for the VIA workaround
 config SWIOTLB
 	bool
@@ -563,18 +562,18 @@ config IOMMU_HELPER
 	def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB)
 
 config NR_CPUS
-	int "Maximum number of CPUs (2-255)"
-	range 2 255
+	int "Maximum number of CPUs (2-4096)"
+	range 2 4096
 	depends on SMP
 	default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
 	default "8"
 	help
 	  This allows you to specify the maximum number of CPUs which this
-	  kernel will support.  The maximum supported value is 255 and the
+	  kernel will support.  The maximum supported value is 4096 and the
 	  minimum value which makes sense is 2.
 
 	  This is purely to save memory - each supported CPU adds
-	  approximately eight kilobytes to the kernel image.
+	  approximately one kilobyte to the kernel image.
 
 config SCHED_SMT
 	bool "SMT (Hyperthreading) scheduler support"
@@ -966,8 +965,8 @@ config NUMA_EMU
 	  number of nodes. This is only useful for debugging.
 
 config NODES_SHIFT
-	int "Max num nodes shift(1-15)"
-	range 1 15  if X86_64
+	int "Max num nodes shift(1-9)"
+	range 1 9  if X86_64
 	default "6" if X86_64
 	default "4" if X86_NUMAQ
 	default "3"
@@ -1475,8 +1474,7 @@ endmenu
 menu "Bus options (PCI etc.)"
 
 config PCI
-	bool "PCI support" if !X86_VISWS && !X86_VSMP
-	depends on !X86_VOYAGER
+	bool "PCI support"
 	default y
 	select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
 	help