X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Fs390%2Fkernel%2Fhead64.S;h=c526279e11239dc65e5c8c8a0b585d3ca1556a04;hb=da8ac5e0fab11d0e84be4e49aaaa828c52d17097;hp=b30e5897cdf75af602fb380785a72a52d2dcc09c;hpb=f0b364a13d7fba001c0571d954f165dfaf5f434a;p=linux-2.6 diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index b30e5897cd..a87b1976d4 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -39,7 +39,69 @@ startup_continue: basr %r13,0 # get base .LPG1: sll %r13,1 # remove high order bit srl %r13,1 - lhi %r1,1 # mode 1 = esame + +#ifdef CONFIG_ZFCPDUMP + + # check if we have been ipled using zfcp dump: + + tm 0xb9,0x01 # test if subchannel is enabled + jno .nodump # subchannel disabled + l %r1,0xb8 + la %r5,.Lipl_schib-.LPG1(%r13) + stsch 0(%r5) # get schib of subchannel + jne .nodump # schib not available + tm 5(%r5),0x01 # devno valid? + jno .nodump + tm 4(%r5),0x80 # qdio capable device? + jno .nodump + l %r2,20(%r0) # address of ipl parameter block + lhi %r3,0 + ic %r3,0x148(%r2) # get opt field + chi %r3,0x20 # load with dump? + jne .nodump + + # store all prefix registers in case of load with dump: + + la %r7,0 # base register for 0 page + la %r8,0 # first cpu + l %r11,.Lpref_arr_ptr-.LPG1(%r13) # address of prefix array + ahi %r11,4 # skip boot cpu + lr %r12,%r11 + ahi %r12,(CONFIG_NR_CPUS*4) # end of prefix array + stap .Lcurrent_cpu+2-.LPG1(%r13) # store current cpu addr +1: + cl %r8,.Lcurrent_cpu-.LPG1(%r13) # is ipl cpu ? + je 4f # if yes get next cpu +2: + lr %r9,%r7 + sigp %r9,%r8,0x9 # stop & store status of cpu + brc 8,3f # accepted + brc 4,4f # status stored: next cpu + brc 2,2b # busy: try again + brc 1,4f # not op: next cpu +3: + mvc 0(4,%r11),264(%r7) # copy prefix register to prefix array + ahi %r11,4 # next element in prefix array + clr %r11,%r12 + je 5f # no more space in prefix array +4: + ahi %r8,1 # next cpu (r8 += 1) + cl %r8,.Llast_cpu-.LPG1(%r13) # is last possible cpu ? + jl 1b # jump if not last cpu +5: + lhi %r1,2 # mode 2 = esame (dump) + j 6f + .align 4 +.Lipl_schib: + .rept 13 + .long 0 + .endr +.nodump: + lhi %r1,1 # mode 1 = esame (normal ipl) +6: +#else + lhi %r1,1 # mode 1 = esame (normal ipl) +#endif /* CONFIG_ZFCPDUMP */ mvi __LC_AR_MODE_ID,1 # set esame flag slr %r0,%r0 # set cpuid to zero sigp %r1,%r0,0x12 # switch to esame mode @@ -58,163 +120,14 @@ startup_continue: stg %r15,__LC_KERNEL_STACK # set end of kernel stack aghi %r15,-160 xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain - - brasl %r14,ipl_save_parameters # -# clear bss memory +# Save ipl parameters, clear bss memory, initialize storage key for kernel pages, +# and create a kernel NSS if the SAVESYS= parm is defined # - larl %r2,__bss_start # start of bss segment - larl %r3,_end # end of bss segment - sgr %r3,%r2 # length of bss - sgr %r4,%r4 # - sgr %r5,%r5 # set src,length and pad to zero - mvcle %r2,%r4,0 # clear mem - jo .-4 # branch back, if not finish - - l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word -.Lservicecall: - stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts - - stctg %r0,%r0,.Lcr-.LPG1(%r13) # get cr0 - la %r1,0x200 # set bit 22 - og %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1 - stg %r1,.Lcr-.LPG1(%r13) - lctlg %r0,%r0,.Lcr-.LPG1(%r13) # load modified cr0 - - mvc __LC_EXT_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) # set postcall psw - larl %r1,.Lsclph - stg %r1,__LC_EXT_NEW_PSW+8 # set handler - - larl %r4,.Lsccb # %r4 is our index for sccb stuff - lgr %r1,%r4 # our sccb - .insn rre,0xb2200000,%r2,%r1 # service call - ipm %r1 - srl %r1,28 # get cc code - xr %r3,%r3 - chi %r1,3 - be .Lfchunk-.LPG1(%r13) # leave - chi %r1,2 - be .Lservicecall-.LPG1(%r13) - lpswe .Lwaitsclp-.LPG1(%r13) -.Lsclph: - lh %r1,.Lsccbr-.Lsccb(%r4) - chi %r1,0x10 # 0x0010 is the sucess code - je .Lprocsccb # let's process the sccb - chi %r1,0x1f0 - bne .Lfchunk-.LPG1(%r13) # unhandled error code - c %r2,.Lrcp-.LPG1(%r13) # Did we try Read SCP forced - bne .Lfchunk-.LPG1(%r13) # if no, give up - l %r2,.Lrcp2-.LPG1(%r13) # try with Read SCP - b .Lservicecall-.LPG1(%r13) -.Lprocsccb: - lghi %r1,0 - icm %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0 - jnz .Lscnd - lg %r1,.Lscpincr2-.Lsccb(%r4) # otherwise use this one -.Lscnd: - xr %r3,%r3 # same logic - ic %r3,.Lscpa1-.Lsccb(%r4) - chi %r3,0x00 - jne .Lcompmem - l %r3,.Lscpa2-.Lsccb(%r4) -.Lcompmem: - mlgr %r2,%r1 # mem in MB on 128-bit - l %r1,.Lonemb-.LPG1(%r13) - mlgr %r2,%r1 # mem size in bytes in %r3 - b .Lfchunk-.LPG1(%r13) - - .align 4 -.Lpmask: - .byte 0 - .align 8 -.Lcr: - .quad 0x00 # place holder for cr0 -.Lwaitsclp: - .quad 0x0102000180000000,.Lsclph -.Lrcp: - .int 0x00120001 # Read SCP forced code -.Lrcp2: - .int 0x00020001 # Read SCP code -.Lonemb: - .int 0x100000 - -.Lfchunk: + brasl %r14,startup_init # set program check new psw mask mvc __LC_PGM_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) - -# -# find memory chunks. -# - lgr %r9,%r3 # end of mem - larl %r1,.Lchkmem # set program check address - stg %r1,__LC_PGM_NEW_PSW+8 - la %r1,1 # test in increments of 128KB - sllg %r1,%r1,17 - larl %r3,memory_chunk - slgr %r4,%r4 # set start of chunk to zero - slgr %r5,%r5 # set end of chunk to zero - slr %r6,%r6 # set access code to zero - la %r10,MEMORY_CHUNKS # number of chunks -.Lloop: - tprot 0(%r5),0 # test protection of first byte - ipm %r7 - srl %r7,28 - clr %r6,%r7 # compare cc with last access code - je .Lsame - j .Lchkmem -.Lsame: - algr %r5,%r1 # add 128KB to end of chunk - # no need to check here, - brc 12,.Lloop # this is the same chunk -.Lchkmem: # > 16EB or tprot got a program check - clgr %r4,%r5 # chunk size > 0? - je .Lchkloop - stg %r4,0(%r3) # store start address of chunk - lgr %r0,%r5 - slgr %r0,%r4 - stg %r0,8(%r3) # store size of chunk - st %r6,20(%r3) # store type of chunk - la %r3,24(%r3) - larl %r8,memory_size - stg %r5,0(%r8) # store memory size - ahi %r10,-1 # update chunk number -.Lchkloop: - lr %r6,%r7 # set access code to last cc - # we got an exception or we're starting a new - # chunk , we must check if we should - # still try to find valid memory (if we detected - # the amount of available storage), and if we - # have chunks left - lghi %r4,1 - sllg %r4,%r4,31 - clgr %r5,%r4 - je .Lhsaskip - xr %r0, %r0 - clgr %r0, %r9 # did we detect memory? - je .Ldonemem # if not, leave - chi %r10, 0 # do we have chunks left? - je .Ldonemem -.Lhsaskip: - algr %r5,%r1 # add 128KB to end of chunk - lgr %r4,%r5 # potential new chunk - clgr %r5,%r9 # should we go on? - jl .Lloop -.Ldonemem: - larl %r12,machine_flags -# -# find out if we are running under VM -# - stidp __LC_CPUID # store cpuid - tm __LC_CPUID,0xff # running under VM ? - bno 0f-.LPG1(%r13) - oi 7(%r12),1 # set VM flag -0: lh %r0,__LC_CPUID+4 # get cpu version - chi %r0,0x7490 # running on a P/390 ? - bne 1f-.LPG1(%r13) - oi 7(%r12),4 # set P/390 flag -1: - # # find out if we have the MVPG instruction # @@ -253,12 +166,12 @@ startup_continue: # # find out if the diag 0x9c is available # - la %r1,0f-.LPG1(%r13) # set program check address - stg %r1,__LC_PGM_NEW_PSW+8 - stap __LC_CPUID+4 # store cpu address - lh %r1,__LC_CPUID+4 - diag %r1,0,0x9c # test diag 0x9c - oi 6(%r12),1 # set diag9c flag + la %r1,0f-.LPG1(%r13) # set program check address + stg %r1,__LC_PGM_NEW_PSW+8 + stap __LC_CPUID+4 # store cpu address + lh %r1,__LC_CPUID+4 + diag %r1,0,0x9c # test diag 0x9c + oi 6(%r12),1 # set diag9c flag 0: # @@ -283,7 +196,7 @@ startup_continue: .quad .Lduct # cr2: dispatchable unit control table .quad 0 # cr3: instruction authorization .quad 0 # cr4: instruction authorization - .quad 0xffffffffffffffff # cr5: primary-aste origin + .quad .Lduct # cr5: primary-aste origin .quad 0 # cr6: I/O interrupts .quad 0 # cr7: secondary space segment table .quad 0 # cr8: access registers translation @@ -294,49 +207,31 @@ startup_continue: .quad 0 # cr13: home space segment table .quad 0xc0000000 # cr14: machine check handling off .quad 0 # cr15: linkage stack operations -.Lduct: .long 0,0,0,0,0,0,0,0 - .long 0,0,0,0,0,0,0,0 .Lpcmsk:.quad 0x0000000180000000 .L4malign:.quad 0xffffffffffc00000 .Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8 .Lnop: .long 0x07000700 +#ifdef CONFIG_ZFCPDUMP +.Lcurrent_cpu: + .long 0x0 +.Llast_cpu: + .long 0x0000ffff +.Lpref_arr_ptr: + .long zfcpdump_prefix_array +#endif /* CONFIG_ZFCPDUMP */ .Lparmaddr: .quad PARMAREA - - .globl ipl_schib -ipl_schib: - .rept 13 - .long 0 + .align 64 +.Lduct: .long 0,0,0,0,.Lduald,0,0,0 + .long 0,0,0,0,0,0,0,0 + .align 128 +.Lduald:.rept 8 + .long 0x80000000,0,0,0 # invalid access-list entries .endr - .globl ipl_flags -ipl_flags: - .long 0 - .globl ipl_devno -ipl_devno: - .word 0 - .org 0x12000 -.globl s390_readinfo_sccb -s390_readinfo_sccb: -.Lsccb: - .hword 0x1000 # length, one page - .byte 0x00,0x00,0x00 - .byte 0x80 # variable response bit set -.Lsccbr: - .hword 0x00 # response code -.Lscpincr1: - .hword 0x00 -.Lscpa1: - .byte 0x00 - .fill 89,1,0 -.Lscpa2: - .int 0x00 -.Lscpincr2: - .quad 0x00 - .fill 3984,1,0 - .org 0x13000 - + .globl _ehead +_ehead: #ifdef CONFIG_SHARED_KERNEL .org 0x100000 #endif