X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Fppc%2FKconfig;h=08e083d30dc68c6d142bb1638963b438d4805ffb;hb=3155f7f23f7865e64f7eb14e226a2dff8197e51f;hp=20dce4681259a0c6daf8f1ccf3af5826b33ca5d8;hpb=408af0dab78ef4145203b849d6bfd3195f6e3ec9;p=linux-2.6

diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 20dce46812..08e083d30d 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -78,18 +78,18 @@ choice
 	default 6xx
 
 config 6xx
-	bool "6xx/7xx/74xx/52xx/82xx/83xx"
+	bool "6xx/7xx/74xx/52xx/82xx"
 	select PPC_FPU
 	help
 	  There are four types of PowerPC chips supported.  The more common
 	  types (601, 603, 604, 740, 750, 7400), the older Freescale
 	  (formerly Motorola) embedded versions (821, 823, 850, 855, 860,
-	  52xx, 82xx, 83xx), the IBM embedded versions (403 and 405) and
+	  52xx, 82xx), the IBM embedded versions (403 and 405) and
 	  the Book E embedded processors from IBM (44x) and Freescale (85xx).
 	  For support for 64-bit processors, set ARCH=powerpc.
 	  Unless you are building a kernel for one of the embedded processor
 	  systems, choose 6xx.
-	  Also note that because the 52xx, 82xx, & 83xx family have a 603e
+	  Also note that because the 52xx, 82xx family have a 603e
 	  core, specific support for that chipset is asked later on.
 
 config 40x
@@ -102,6 +102,7 @@ config 44x
 
 config 8xx
 	bool "8xx"
+	select PPC_LIB_RHEAP
 
 config E200
 	bool "e200"
@@ -152,7 +153,7 @@ config PHYS_64BIT
 config ALTIVEC
 	bool "AltiVec Support"
 	depends on 6xx
-	depends on !8260 && !83xx
+	depends on !8260
 	---help---
 	  This option enables kernel support for the Altivec extensions to the
 	  PowerPC processor. The kernel currently supports saving and restoring
@@ -183,7 +184,7 @@ config SPE
 
 config TAU
 	bool "Thermal Management Support"
-	depends on 6xx && !8260 && !83xx
+	depends on 6xx && !8260
 	help
 	  G3 and G4 processors have an on-chip temperature sensor called the
 	  'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
@@ -720,16 +721,6 @@ config LITE5200B
 	  Support for the LITE5200B dev board for the MPC5200 from Freescale.
 	  This is the new board with 2 PCI slots.
 
-config MPC834x_SYS
-	bool "Freescale MPC834x SYS"
-	help
-	  This option enables support for the MPC 834x SYS evaluation board.
-
-	  Be aware that PCI buses can only function when SYS board is plugged
-	  into the PIB (Platform IO Board) board from Freescale which provide
-	  3 PCI slots.  The PIBs PCI initialization is the bootloader's
-	  responsibility.
-
 config EV64360
 	bool "Marvell-EV64360BP"
 	help
@@ -773,18 +764,6 @@ config 8272
 	  The MPC8272 CPM has a different internal dpram setup than other CPM2
 	  devices
 
-config 83xx
-	bool
-	default y if MPC834x_SYS
-
-config MPC834x
-	bool
-	default y if MPC834x_SYS
-
-config PPC_83xx
-	bool
-	default y if 83xx
-
 config CPM1
 	bool
 	depends on 8xx
@@ -798,6 +777,7 @@ config CPM1
 config CPM2
 	bool
 	depends on 8260 || MPC8560 || MPC8555
+	select PPC_LIB_RHEAP
 	default y
 	help
 	  The CPM2 (Communications Processor Module) is a coprocessor on
@@ -809,8 +789,7 @@ config PPC_GEN550
 	bool
 	depends on SANDPOINT || SPRUCE || PPLUS || \
 		PRPMC750 || PRPMC800 || LOPEC || \
-		(EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
-		83xx
+		(EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D
 	default y
 
 config FORCE
@@ -1072,7 +1051,7 @@ config PPC_I8259
 config PPC_INDIRECT_PCI
 	bool
 	depends on PCI
-	default y if 40x || 44x || 85xx || 83xx || PPC_PREP
+	default y if 40x || 44x || 85xx || PPC_PREP
 	default n
 
 config EISA
@@ -1089,8 +1068,8 @@ config MCA
 	bool
 
 config PCI
-	bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx
-	default y if !40x && !CPM2 && !8xx && !83xx && !85xx
+	bool "PCI support" if 40x || CPM2 || 85xx || PPC_MPC52xx
+	default y if !40x && !CPM2 && !8xx && !85xx
 	default PCI_QSPAN if !4xx && !CPM2 && 8xx
 	help
 	  Find out whether your system includes a PCI bus. PCI is the name of
@@ -1104,11 +1083,6 @@ config PCI_DOMAINS
 config PCI_SYSCALL
 	def_bool PCI
 
-config MPC83xx_PCI2
-	bool "Support for 2nd PCI host controller"
-	depends on PCI && MPC834x
-	default y if MPC834x_SYS
-
 config PCI_QSPAN
 	bool "QSpan PCI"
 	depends on !4xx && !CPM2 && 8xx
@@ -1277,6 +1251,10 @@ config BOOT_LOAD
 config PIN_TLB
 	bool "Pinned Kernel TLBs (860 ONLY)"
 	depends on ADVANCED_OPTIONS && 8xx
+
+config PPC_LIB_RHEAP
+	bool
+
 endmenu
 
 source "net/Kconfig"
@@ -1311,7 +1289,7 @@ endmenu
 
 source "lib/Kconfig"
 
-source "arch/powerpc/oprofile/Kconfig"
+source "kernel/Kconfig.instrumentation"
 
 source "arch/ppc/Kconfig.debug"