X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Fblackfin%2Fmach-bf537%2Fboards%2Fgeneric_board.c;h=3e52f3f5bd5888b7aa0e0d0c7b10242531a011ec;hb=f9f7dd222364a6428d2ad99a515935dd1dd89d18;hp=6668c8e4a3fc953fb95f7f1a899a5e1212945985;hpb=efefc6eb38d43b8e5daef482f575d767b002004e;p=linux-2.6

diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 6668c8e4a3..3e52f3f5bd 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -8,7 +8,7 @@
  *
  * Modified:
  *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2007 Analog Devices Inc.
+ *               Copyright 2004-2008 Analog Devices Inc.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
@@ -29,13 +29,14 @@
  */
 
 #include <linux/device.h>
+#include <linux/etherdevice.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
 #endif
 #include <linux/pata_platform.h>
 #include <linux/irq.h>
@@ -44,12 +45,13 @@
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
+#include <asm/portmux.h>
 #include <linux/spi/ad7877.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
  */
-char *bfin_board_name = "GENERIC Board";
+const char bfin_board_name[] = "GENERIC Board";
 
 /*
  *  Driver needs to know address, irq and flag pin.
@@ -203,12 +205,8 @@ static struct resource sl811_hcd_resources[] = {
 void sl811_port_power(struct device *dev, int is_on)
 {
 	gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
-	gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS);
+	gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
 
-	if (is_on)
-		gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1);
-	else
-		gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0);
 }
 #endif
 
@@ -502,7 +500,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.platform_data		= &bfin_ad7877_ts_info,
 		.irq			= IRQ_PF6,
 		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num	= 1,
+		.bus_num	= 0,
 		.chip_select  = 1,
 		.controller_data = &spi_ad7877_chip_info,
 	},
@@ -513,6 +511,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = 8,
 	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 /* SPI (0) */
@@ -730,3 +729,12 @@ void native_machine_restart(char *cmd)
 	if ((bfin_read_SYSCR() & 0x7) == 0x3)
 		bfin_gpio_reset_spi0_ssel1();
 }
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+void bfin_get_ether_addr(char *addr)
+{
+	random_ether_addr(addr);
+	printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
+#endif