X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Farm%2Fmach-omap1%2Fboard-h2.c;h=4b444fdaafea04b430234f61574471168931155f;hb=a8cac817764a494705aebd99fd51bdf6cdc28ec9;hp=bfa04fa25524c23b5a0ede5a41313fe1a529f5bd;hpb=7924e4f6519dd5b349ed146fe9fe35206730be67;p=linux-2.6 diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index bfa04fa255..4b444fdaaf 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -37,8 +37,10 @@ #include #include +#include #include #include +#include #include #include #include @@ -46,8 +48,6 @@ #include #include -extern int omap_gpio_init(void); - static int h2_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -140,8 +140,6 @@ static struct platform_device h2_nor_device = { .resource = &h2_nor_resource, }; -#if 0 /* REVISIT: Enable when nand_platform_data is applied */ - static struct mtd_partition h2_nand_partitions[] = { #if 0 /* REVISIT: enable these partitions if you make NAND BOOT @@ -179,7 +177,7 @@ static struct mtd_partition h2_nand_partitions[] = { }; /* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ -static struct nand_platform_data h2_nand_data = { +static struct omap_nand_platform_data h2_nand_data = { .options = NAND_SAMSUNG_LP_OPTIONS, .parts = h2_nand_partitions, .nr_parts = ARRAY_SIZE(h2_nand_partitions), @@ -198,7 +196,6 @@ static struct platform_device h2_nand_device = { .num_resources = 1, .resource = &h2_nand_resource, }; -#endif static struct resource h2_smc91x_resources[] = { [0] = { @@ -311,18 +308,18 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = { .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), .pcr0 = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP, - //.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ + /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */ }; static struct omap_alsa_codec_config alsa_config = { .name = "H2 TSC2101", .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, // tsc2101_configure, - .codec_set_samplerate = NULL, // tsc2101_set_samplerate, - .codec_clock_setup = NULL, // tsc2101_clock_setup, - .codec_clock_on = NULL, // tsc2101_clock_on, - .codec_clock_off = NULL, // tsc2101_clock_off, - .get_default_samplerate = NULL, // tsc2101_get_default_samplerate, + .codec_configure_dev = NULL, /* tsc2101_configure, */ + .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */ + .codec_clock_setup = NULL, /* tsc2101_clock_setup, */ + .codec_clock_on = NULL, /* tsc2101_clock_on, */ + .codec_clock_off = NULL, /* tsc2101_clock_off, */ + .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */ }; static struct platform_device h2_mcbsp1_device = { @@ -335,7 +332,7 @@ static struct platform_device h2_mcbsp1_device = { static struct platform_device *h2_devices[] __initdata = { &h2_nor_device, - //&h2_nand_device, + &h2_nand_device, &h2_smc91x_device, &h2_irda_device, &h2_kp_device, @@ -343,22 +340,6 @@ static struct platform_device *h2_devices[] __initdata = { &h2_mcbsp1_device, }; -#ifdef CONFIG_I2C_BOARDINFO -static struct i2c_board_info __initdata h2_i2c_board_info[] = { - { - I2C_BOARD_INFO("tps65010", 0x48), - .type = "tps65010", - .irq = OMAP_GPIO_IRQ(58), - }, - /* TODO when driver support is ready: - * - isp1301 OTG transceiver - * - optional ov9640 camera sensor at 0x30 - * - pcf9754 for aGPS control - * - ... etc - */ -}; -#endif - static void __init h2_init_smc91x(void) { if ((omap_request_gpio(0)) < 0) { @@ -367,6 +348,16 @@ static void __init h2_init_smc91x(void) } } +static struct i2c_board_info __initdata h2_i2c_board_info[] = { + { + I2C_BOARD_INFO("tps65010", 0x48), + .irq = OMAP_GPIO_IRQ(58), + }, { + I2C_BOARD_INFO("isp1301_omap", 0x2d), + .irq = OMAP_GPIO_IRQ(2), + }, +}; + static void __init h2_init_irq(void) { omap1_init_common_hw(); @@ -380,26 +371,25 @@ static struct omap_usb_config h2_usb_config __initdata = { .otg = 2, #ifdef CONFIG_USB_GADGET_OMAP - .hmc_mode = 19, // 0:host(off) 1:dev|otg 2:disabled - // .hmc_mode = 21, // 0:host(off) 1:dev(loopback) 2:host(loopback) + .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ + /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) /* needs OTG cable, or NONSTANDARD (B-to-MiniB) */ - .hmc_mode = 20, // 1:dev|otg(off) 1:host 2:disabled + .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ #endif .pins[1] = 3, }; static struct omap_mmc_config h2_mmc_config __initdata = { - .mmc [0] = { - .enabled = 1, + .mmc[0] = { + .enabled = 1, .wire4 = 1, - .wp_pin = OMAP_MPUIO(3), - .power_pin = -1, /* tps65010 gpio3 */ - .switch_pin = OMAP_MPUIO(1), }, }; +extern struct omap_mmc_platform_data h2_mmc_data; + static struct omap_uart_config h2_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; @@ -409,15 +399,15 @@ static struct omap_lcd_config h2_lcd_config __initdata = { }; static struct omap_board_config_kernel h2_config[] __initdata = { - { OMAP_TAG_USB, &h2_usb_config }, - { OMAP_TAG_MMC, &h2_mmc_config }, + { OMAP_TAG_USB, &h2_usb_config }, + { OMAP_TAG_MMC, &h2_mmc_config }, { OMAP_TAG_UART, &h2_uart_config }, { OMAP_TAG_LCD, &h2_lcd_config }, }; #define H2_NAND_RB_GPIO_PIN 62 -static int h2_nand_dev_ready(struct nand_platform_data *data) +static int h2_nand_dev_ready(struct omap_nand_platform_data *data) { return omap_get_gpio_datain(H2_NAND_RB_GPIO_PIN); } @@ -436,18 +426,16 @@ static void __init h2_init(void) h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys(); h2_nor_resource.end += SZ_32M - 1; -#if 0 /* REVISIT: Enable when nand_platform_data is applied */ h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS; h2_nand_resource.end += SZ_4K - 1; if (!(omap_request_gpio(H2_NAND_RB_GPIO_PIN))) h2_nand_data.dev_ready = h2_nand_dev_ready; -#endif omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); /* MMC: card detect and WP */ - // omap_cfg_reg(U19_ARMIO1); /* CD */ + /* omap_cfg_reg(U19_ARMIO1); */ /* CD */ omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */ /* Irda */ @@ -463,16 +451,9 @@ static void __init h2_init(void) omap_board_config = h2_config; omap_board_config_size = ARRAY_SIZE(h2_config); omap_serial_init(); - - /* irq for tps65010 chip */ - omap_cfg_reg(W4_GPIO58); - if (gpio_request(58, "tps65010") == 0) - gpio_direction_input(58); - -#ifdef CONFIG_I2C_BOARDINFO - i2c_register_board_info(1, h2_i2c_board_info, - ARRAY_SIZE(h2_i2c_board_info)); -#endif + omap_register_i2c_bus(1, 100, h2_i2c_board_info, + ARRAY_SIZE(h2_i2c_board_info)); + h2_mmc_init(); } static void __init h2_map_io(void) @@ -480,22 +461,6 @@ static void __init h2_map_io(void) omap1_map_common_io(); } -#ifdef CONFIG_TPS65010 -static int __init h2_tps_init(void) -{ - if (!machine_is_omap_h2()) - return 0; - - /* gpio3 for SD, gpio4 for VDD_DSP */ - /* FIXME send power to DSP iff it's configured */ - - /* Enable LOW_PWR */ - tps65010_set_low_pwr(ON); - return 0; -} -fs_initcall(h2_tps_init); -#endif - MACHINE_START(OMAP_H2, "TI-H2") /* Maintainer: Imre Deak */ .phys_io = 0xfff00000,