X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Farm%2Fmach-iop32x%2Fn2100.c;h=bc91d6e66bc4ea05e067d3b322b3ed8f1f64ac07;hb=0048e1c44a4529d4ea93e6920fa5468730c68c94;hp=966aa51aee09f2a2ae2f430357234d7e178bce85;hpb=2874b391bd78a5b8cb84be67297a345fbdec4ac8;p=linux-2.6

diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 966aa51aee..bc91d6e66b 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -16,6 +16,7 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
+#include <linux/f75375s.h>
 #include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
@@ -25,6 +26,7 @@
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <asm/hardware.h>
@@ -37,6 +39,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
+#include <asm/arch/time.h>
 
 /*
  * N2100 timer tick configuration.
@@ -44,12 +47,12 @@
 static void __init n2100_timer_init(void)
 {
 	/* 33.000 MHz crystal.  */
-	iop3xx_init_time(198000000);
+	iop_init_time(198000000);
 }
 
 static struct sys_timer n2100_timer = {
 	.init		= n2100_timer_init,
-	.offset		= iop3xx_gettimeoffset,
+	.offset		= iop_gettimeoffset,
 };
 
 
@@ -75,7 +78,7 @@ void __init n2100_map_io(void)
 /*
  * N2100 PCI.
  */
-static inline int __init
+static int __init
 n2100_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;
@@ -198,6 +201,22 @@ static struct platform_device n2100_serial_device = {
 	.resource	= &n2100_uart_resource,
 };
 
+static struct f75375s_platform_data n2100_f75375s = {
+	.pwm		= { 255, 255 },
+	.pwm_enable = { 0, 0 },
+};
+
+static struct i2c_board_info __initdata n2100_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rtc-rs5c372", 0x32),
+		.type = "rs5c372b",
+	},
+	{
+		I2C_BOARD_INFO("f75375", 0x2e),
+		.type = "f75375",
+		.platform_data = &n2100_f75375s,
+	},
+};
 
 /*
  * Pull PCA9532 GPIO #8 low to power off the machine.
@@ -244,6 +263,11 @@ static void __init n2100_init_machine(void)
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&n2100_flash_device);
 	platform_device_register(&n2100_serial_device);
+	platform_device_register(&iop3xx_dma_0_channel);
+	platform_device_register(&iop3xx_dma_1_channel);
+
+	i2c_register_board_info(0, n2100_i2c_devices,
+		ARRAY_SIZE(n2100_i2c_devices));
 
 	pm_power_off = n2100_power_off;