X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Farm%2FKconfig;h=a04f507e7f2ca94f1b959d0e03dac7f0a3c73575;hb=b3bea15d29799797d1486aeddf883404a2e05c81;hp=691aae309c8af1f04ec2cfafcae74fb1b482fd3a;hpb=194e3d174043f5ab22649a5cb38a1c05d015750f;p=linux-2.6

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 691aae309c..a04f507e7f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -318,6 +318,9 @@ config ARCH_KS8695
 
 config ARCH_NS9XXX
 	bool "NetSilicon NS9xxx"
+	select GENERIC_GPIO
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 	help
 	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
 	  System.
@@ -336,14 +339,14 @@ config ARCH_PNX4008
 	  This enables support for Philips PNX4008 mobile platform.
 
 config ARCH_PXA
-	bool "PXA2xx-based"
+	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
-	  Support for Intel's PXA2XX processor line.
+	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
 config ARCH_RPC
 	bool "RiscPC"
@@ -486,7 +489,7 @@ source arch/arm/mm/Kconfig
 config IWMMXT
 	bool "Enable iWMMXt support"
 	depends on CPU_XSCALE || CPU_XSC3
-	default y if PXA27x
+	default y if PXA27x || PXA3xx
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
@@ -534,7 +537,7 @@ config ISA_DMA_API
 	bool
 
 config PCI
-	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695
+	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
@@ -555,6 +558,12 @@ config PCI_HOST_VIA82C505
 	depends on PCI && ARCH_SHARK
 	default y
 
+config PCI_HOST_ITE8152
+	bool
+	depends on PCI && MACH_ARMCORE
+	default y
+	select DMABOUNCE
+
 source "drivers/pci/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
@@ -848,7 +857,7 @@ config KEXEC
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
-	  but it is indepedent of the system firmware.   And like a reboot
+	  but it is independent of the system firmware.   And like a reboot
 	  you can start any kernel with it, not just Linux.
 
 	  It is an ongoing process to be certain the hardware in a machine
@@ -994,6 +1003,10 @@ source "drivers/pnp/Kconfig"
 
 source "drivers/block/Kconfig"
 
+# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4
+
+source "drivers/misc/Kconfig"
+
 if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \
 	|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
 	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
@@ -1029,15 +1042,17 @@ source "drivers/spi/Kconfig"
 
 source "drivers/w1/Kconfig"
 
+source "drivers/power/Kconfig"
+
 source "drivers/hwmon/Kconfig"
 
-#source "drivers/l3/Kconfig"
+source "drivers/watchdog/Kconfig"
 
-source "drivers/misc/Kconfig"
+source "drivers/ssb/Kconfig"
 
-source "drivers/mfd/Kconfig"
+#source "drivers/l3/Kconfig"
 
-source "drivers/leds/Kconfig"
+source "drivers/mfd/Kconfig"
 
 source "drivers/media/Kconfig"
 
@@ -1051,15 +1066,19 @@ source "drivers/usb/Kconfig"
 
 source "drivers/mmc/Kconfig"
 
+source "drivers/leds/Kconfig"
+
 source "drivers/rtc/Kconfig"
 
 source "drivers/dma/Kconfig"
 
+source "drivers/dca/Kconfig"
+
 endmenu
 
 source "fs/Kconfig"
 
-source "arch/arm/oprofile/Kconfig"
+source "arch/arm/Kconfig.instrumentation"
 
 source "arch/arm/Kconfig.debug"