X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=Documentation%2Fmd.txt;h=03a13c462cf20ed8e09d85ead4b953cfad3b6218;hb=0b1fc9b86f49e1e73e473e06a16556ca0dce53ae;hp=866a1a887547fa80b7ad85f34a5c692430f0b866;hpb=93c8cad03f02dbd1532a5413bdced25f000d5728;p=linux-2.6

diff --git a/Documentation/md.txt b/Documentation/md.txt
index 866a1a8875..03a13c462c 100644
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -200,6 +200,36 @@ All md devices contain:
      This can be written only while the array is being assembled, not
      after it is started.
 
+   new_dev
+     This file can be written but not read.  The value written should
+     be a block device number as major:minor.  e.g. 8:0
+     This will cause that device to be attached to the array, if it is
+     available.  It will then appear at md/dev-XXX (depending on the
+     name of the device) and further configuration is then possible.
+
+   sync_speed_min
+   sync_speed_max
+     This are similar to /proc/sys/dev/raid/speed_limit_{min,max}
+     however they only apply to the particular array.
+     If no value has been written to these, of if the word 'system'
+     is written, then the system-wide value is used.  If a value,
+     in kibibytes-per-second is written, then it is used.
+     When the files are read, they show the currently active value
+     followed by "(local)" or "(system)" depending on whether it is
+     a locally set or system-wide value.
+
+   sync_completed
+     This shows the number of sectors that have been completed of
+     whatever the current sync_action is, followed by the number of
+     sectors in total that could need to be processed.  The two
+     numbers are separated by a '/'  thus effectively showing one
+     value, a fraction of the process that is complete.
+
+   sync_speed
+     This shows the current actual speed, in K/sec, of the current
+     sync_action.  It is averaged over the last 30 seconds.
+
+
 As component devices are added to an md array, they appear in the 'md'
 directory as new directories named
       dev-XXX
@@ -250,6 +280,13 @@ Each directory contains:
         the device before this offset us not touched, unless it is
         used for storing metadata (Formats 1.1 and 1.2).
 
+      size
+        The amount of the device, after the offset, that can be used
+        for storage of data.  This will normally be the same as the
+	component_size.  This can be written while assembling an
+        array.  If a value less than the current component_size is
+        written, component_size will be reduced to this value.
+
 
 An active md device will also contain and entry for each active device
 in the array.  These are named