X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;ds=sidebyside;f=drivers%2Fvideo%2FKconfig;h=44b6ca290ce36bdcde56a22a8ec13b02e5fa8fd8;hb=8cde0776ec1e86c270f65bf482f96288e6bf0023;hp=773ae11b4a19edfddf92b0333462d6ef19c000d3;hpb=7a482425f45e695a2e2821b32a887865f016fbf9;p=linux-2.6
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 773ae11b4a..44b6ca290c 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -65,15 +65,6 @@ config FB_CFB_IMAGEBLIT
blitting. This is used by drivers that don't provide their own
(accelerated) version.
-config FB_SOFT_CURSOR
- tristate
- depends on FB
- default n
- ---help---
- Include the soft_cursor function for generic software cursor support.
- This is used by drivers that don't provide their own (accelerated)
- version.
-
config FB_MACMODES
tristate
depends on FB
@@ -114,7 +105,6 @@ config FB_CIRRUS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
This enables support for Cirrus Logic GD542x/543x based boards on
Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
@@ -133,7 +123,6 @@ config FB_PM2
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Permedia2 AGP frame
buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a
@@ -152,7 +141,6 @@ config FB_ARMCLCD
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This framebuffer device driver is for the ARM PrimeCell PL110
Colour LCD controller. ARM PrimeCells provide the building
@@ -169,7 +157,6 @@ config FB_ACORN
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Acorn VIDC graphics
hardware found in Acorn RISC PCs and other ARM-based machines. If
@@ -181,7 +168,9 @@ config FB_CLPS711X
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
+ help
+ Say Y to enable the Framebuffer driver for the CLPS7111 and
+ EP7212 processors.
config FB_SA1100
bool "SA-1100 LCD support"
@@ -189,7 +178,6 @@ config FB_SA1100
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is a framebuffer device for the SA-1100 LCD Controller.
See for information on framebuffer
@@ -204,7 +192,6 @@ config FB_IMX
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
config FB_CYBER2000
tristate "CyberPro 2000/2010/5000 support"
@@ -212,7 +199,6 @@ config FB_CYBER2000
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This enables support for the Integraphics CyberPro 20x0 and 5000
VGA chips used in the Rebel.com Netwinder and other machines.
@@ -225,7 +211,6 @@ config FB_APOLLO
default y
select FB_CFB_FILLRECT
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
config FB_Q40
bool
@@ -234,12 +219,10 @@ config FB_Q40
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
config FB_AMIGA
tristate "Amiga native chipset support"
depends on FB && AMIGA
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the builtin graphics
chipset found in Amigas.
@@ -279,7 +262,6 @@ config FB_CYBER
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This enables support for the Cybervision 64 graphics card from
Phase5. Please note that its use is not all that intuitive (i.e. if
@@ -294,7 +276,6 @@ config FB_VIRGE
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This enables support for the Cybervision 64/3D graphics card from
Phase5. Please note that its use is not all that intuitive (i.e. if
@@ -317,7 +298,6 @@ config FB_FM2
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Amiga FrameMaster
card from BSC (exhibited 1992 but not shipped as a CBM product).
@@ -328,7 +308,6 @@ config FB_ARC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This enables support for the Arc Monochrome LCD board. The board
is based on the KS-108 lcd controller and is typically a matrix
@@ -351,7 +330,6 @@ config FB_OF
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES
help
Say Y if you want support with Open Firmware for your graphics
@@ -363,7 +341,6 @@ config FB_CONTROL
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES
help
This driver supports a frame buffer for the graphics adapter in the
@@ -375,7 +352,6 @@ config FB_PLATINUM
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES
help
This driver supports a frame buffer for the "platinum" graphics
@@ -387,7 +363,6 @@ config FB_VALKYRIE
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES
help
This driver supports a frame buffer for the "valkyrie" graphics
@@ -399,42 +374,32 @@ config FB_CT65550
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Chips & Technologies
65550 graphics chip in PowerBooks.
config FB_ASILIANT
- bool "Chips 69000 display support"
+ bool "Asiliant (Chips) 69000 display support"
depends on (FB = y) && PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
config FB_IMSTT
bool "IMS Twin Turbo display support"
depends on (FB = y) && PCI
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES if PPC
help
The IMS Twin Turbo is a PCI-based frame buffer card bundled with
many Macintosh and compatible computers.
-config FB_S3TRIO
- bool "S3 Trio display support"
- depends on (FB = y) && PPC && BROKEN
- help
- If you have a S3 Trio say Y. Say N for S3 Virge.
-
config FB_VGA16
tristate "VGA 16-color graphics support"
depends on FB && (X86 || PPC)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for VGA 16 color graphic
cards. Say Y if you have such a card.
@@ -448,7 +413,6 @@ config FB_STI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
default y
---help---
STI refers to the HP "Standard Text Interface" which is a set of
@@ -469,7 +433,6 @@ config FB_MAC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES
# bool ' Apple DAFB display support' CONFIG_FB_DAFB
@@ -478,7 +441,6 @@ config FB_HP300
depends on (FB = y) && HP300
select FB_CFB_FILLRECT
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
default y
config FB_TGA
@@ -487,18 +449,16 @@ config FB_TGA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for generic TGA graphic
cards. Say Y if you have one of those.
config FB_VESA
bool "VESA VGA graphics support"
- depends on (FB = y) && (X86 || X86_64)
+ depends on (FB = y) && X86
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for generic VESA 2.0
compliant graphic cards. The older VESA 1.2 cards are not supported.
@@ -516,7 +476,6 @@ config FB_HGA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Say Y here if you have a Hercules mono graphics card.
@@ -545,7 +504,6 @@ config FB_SGIVW
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
SGI Visual Workstation support for framebuffer graphics.
@@ -555,7 +513,6 @@ config FB_GBE
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for SGI Graphics Backend.
This chip is used in SGI O2 and Visual Workstation 320/540.
@@ -583,7 +540,6 @@ config FB_BW2
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the BWtwo frame buffer.
@@ -592,7 +548,6 @@ config FB_CG3
depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the CGthree frame buffer.
@@ -601,7 +556,6 @@ config FB_CG6
depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the CGsix (GX, TurboGX)
frame buffer.
@@ -612,7 +566,6 @@ config FB_PVR2
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
Say Y here if you have a PowerVR 2 card in your box. If you plan to
run linux on your Dreamcast, you will have to say Y here.
@@ -634,13 +587,55 @@ config FB_EPSON1355
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Build in support for the SED1355 Epson Research Embedded RAMDAC
LCD/CRT Controller (since redesignated as the S1D13505) as a
framebuffer. Product specs at
.
+config FB_E1356
+ tristate "Epson SED1356 framebuffer support"
+ depends on FB && EXPERIMENTAL && PCI && MIPS
+
+config PB1000_CRT
+ bool "Use CRT on Pb1000 (J65)"
+ depends on MIPS_PB1000=y && FB_E1356
+
+config PB1000_NTSC
+ bool "Use Compsite NTSC on Pb1000 (J63)"
+ depends on MIPS_PB1000=y && FB_E1356
+
+config PB1000_TFT
+ bool "Use TFT Panel on Pb1000 (J64)"
+ depends on MIPS_PB1000=y && FB_E1356
+
+config PB1500_CRT
+ bool "Use CRT on Pb1500 " if MIPS_PB1500=y
+ depends on FB_E1356
+
+config PB1500_CRT
+ prompt "Use CRT on Pb1100 "
+ depends on FB_E1356 && MIPS_PB1100=y
+
+config PB1500_TFT
+ bool "Use TFT Panel on Pb1500 " if MIPS_PB1500=y
+ depends on FB_E1356
+
+config PB1500_TFT
+ prompt "Use TFT Panel on Pb1100 "
+ depends on FB_E1356 && MIPS_PB1100=y
+
+config FB_S1D13XXX
+ tristate "Epson S1D13XXX framebuffer support"
+ depends on FB
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Support for S1D13XXX framebuffer device family (currently only
+ working with S1D13806). Product specs at
+
+
config FB_NVIDIA
tristate "nVidia Framebuffer Support"
depends on FB && PCI
@@ -650,7 +645,6 @@ config FB_NVIDIA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports graphics boards with the nVidia chips, TNT
and newer. For very old chipsets, such as the RIVA128, then use
@@ -662,7 +656,7 @@ config FB_NVIDIA
config FB_NVIDIA_I2C
bool "Enable DDC Support"
- depends on FB_NVIDIA && !PPC_OF
+ depends on FB_NVIDIA
help
This enables I2C support for nVidia Chipsets. This is used
only for getting EDID information from the attached display
@@ -712,7 +706,7 @@ config FB_RIVA_DEBUG
config FB_I810
tristate "Intel 810/815 support (EXPERIMENTAL)"
- depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
+ depends on FB && EXPERIMENTAL && PCI && X86_32
select AGP
select AGP_INTEL
select FB_MODE_HELPERS
@@ -761,7 +755,7 @@ config FB_I810_I2C
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
- depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
+ depends on FB && EXPERIMENTAL && PCI && X86_32
select AGP
select AGP_INTEL
select FB_MODE_HELPERS
@@ -790,7 +784,6 @@ config FB_MATROX
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_TILEBLITTING
select FB_MACMODES if PPC_PMAC
---help---
@@ -931,7 +924,6 @@ config FB_RADEON_OLD
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES if PPC
help
Choose this option if you want to use an ATI Radeon graphics card as
@@ -949,7 +941,6 @@ config FB_RADEON
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES if PPC_OF
help
Choose this option if you want to use an ATI Radeon graphics card as
@@ -987,7 +978,6 @@ config FB_ATY128
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES if PPC_PMAC
help
This driver supports graphics boards with the ATI Rage128 chips.
@@ -1003,7 +993,6 @@ config FB_ATY
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES if PPC
help
This driver supports graphics boards with the ATI Mach64 chips.
@@ -1046,6 +1035,12 @@ config FB_ATY_GX
is at
.
+config FB_S3TRIO
+ bool "S3 Trio display support"
+ depends on (FB = y) && PPC && BROKEN
+ help
+ If you have a S3 Trio say Y. Say N for S3 Virge.
+
config FB_SAVAGE
tristate "S3 Savage support"
depends on FB && PCI && EXPERIMENTAL
@@ -1055,7 +1050,6 @@ config FB_SAVAGE
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports notebooks and computers with S3 Savage PCI/AGP
chips.
@@ -1092,7 +1086,6 @@ config FB_SIS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the SiS 300, 315, 330
and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
@@ -1122,7 +1115,6 @@ config FB_NEOMAGIC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports notebooks with NeoMagic PCI chips.
Say Y if you have such a graphics card.
@@ -1136,7 +1128,6 @@ config FB_KYRO
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
graphics board.
@@ -1150,7 +1141,6 @@ config FB_3DFX
select FB_CFB_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
- select FB_SOFT_CURSOR
help
This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
chips. Say Y if you have such a graphics board.
@@ -1172,7 +1162,6 @@ config FB_VOODOO1
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
Voodoo2 (cvg) based graphics card.
@@ -1189,7 +1178,6 @@ config FB_CYBLA
tristate "Cyberblade/i1 support"
depends on FB && PCI
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select VIDEO_SELECT
---help---
This driver is supposed to support the Trident Cyberblade/i1
@@ -1217,7 +1205,6 @@ config FB_TRIDENT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
This driver is supposed to support graphics boards with the
Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
@@ -1249,38 +1236,6 @@ config FB_PM3
similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
and maybe other boards.
-config FB_E1356
- tristate "Epson SED1356 framebuffer support"
- depends on FB && EXPERIMENTAL && PCI && MIPS
-
-config PB1000_CRT
- bool "Use CRT on Pb1000 (J65)"
- depends on MIPS_PB1000=y && FB_E1356
-
-config PB1000_NTSC
- bool "Use Compsite NTSC on Pb1000 (J63)"
- depends on MIPS_PB1000=y && FB_E1356
-
-config PB1000_TFT
- bool "Use TFT Panel on Pb1000 (J64)"
- depends on MIPS_PB1000=y && FB_E1356
-
-config PB1500_CRT
- bool "Use CRT on Pb1500 " if MIPS_PB1500=y
- depends on FB_E1356
-
-config PB1500_CRT
- prompt "Use CRT on Pb1100 "
- depends on FB_E1356 && MIPS_PB1100=y
-
-config PB1500_TFT
- bool "Use TFT Panel on Pb1500 " if MIPS_PB1500=y
- depends on FB_E1356
-
-config PB1500_TFT
- prompt "Use TFT Panel on Pb1100 "
- depends on FB_E1356 && MIPS_PB1100=y
-
config FB_AU1100
bool "Au1100 LCD Driver"
depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
@@ -1298,7 +1253,6 @@ config FB_FFB
depends on FB_SBUS && SPARC64
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Creator, Creator3D,
and Elite3D graphics boards.
@@ -1309,7 +1263,6 @@ config FB_TCX
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the TCX 24/8bit frame
buffer.
@@ -1320,7 +1273,6 @@ config FB_CG14
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the CGfourteen frame
buffer on Desktop SPARCsystems with the SX graphics option.
@@ -1331,7 +1283,6 @@ config FB_P9100
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the P9100 card
supported on Sparcbook 3 machines.
@@ -1342,7 +1293,6 @@ config FB_LEO
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the SBUS-based Sun ZX
(leo) frame buffer cards.
@@ -1357,7 +1307,6 @@ config FB_IGA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the framebuffer device for the INTERGRAPHICS 1680 and
successor frame buffer cards.
@@ -1368,40 +1317,36 @@ config FB_HIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Hitachi HD64461 LCD
frame buffer card.
config FB_PMAG_AA
bool "PMAG-AA TURBOchannel framebuffer support"
- depends on (FB = y) && MACH_DECSTATION && TC
+ depends on (FB = y) && TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
used mainly in the MIPS-based DECstation series.
config FB_PMAG_BA
bool "PMAG-BA TURBOchannel framebuffer support"
- depends on (FB = y) && MACH_DECSTATION && TC
+ depends on (FB = y) && TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
used mainly in the MIPS-based DECstation series.
config FB_PMAGB_B
bool "PMAGB-B TURBOchannel framebuffer support"
- depends on (FB = y) && MACH_DECSTATION && TC
+ depends on (FB = y) && TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Support for the PMAGB-B TURBOchannel framebuffer card used mainly
in the MIPS-based DECstation series. The card is currently only
@@ -1409,11 +1354,10 @@ config FB_PMAGB_B
config FB_MAXINE
bool "Maxine (Personal DECstation) onboard framebuffer support"
- depends on (FB = y) && MACH_DECSTATION && TC
+ depends on (FB = y) && MACH_DECSTATION
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Support for the onboard framebuffer (1024x768x8) in the Personal
DECstation series (Personal DECstation 5000/20, /25, /33, /50,
@@ -1425,7 +1369,6 @@ config FB_TX3912
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
see .
@@ -1438,7 +1381,6 @@ config FB_G364
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
The G364 driver is the framebuffer used in MIPS Magnum 4000 and
Olivetti M700-10 systems.
@@ -1449,7 +1391,6 @@ config FB_68328
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Say Y here if you want to support the built-in frame buffer of
the Motorola 68328 CPU family.
@@ -1460,7 +1401,6 @@ config FB_PXA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
Frame buffer driver for the built-in LCD controller in the Intel
PXA2x0 processor.
@@ -1472,23 +1412,6 @@ config FB_PXA
If unsure, say N.
-config FB_W100
- tristate "W100 frame buffer support"
- depends on FB && PXA_SHARPSL
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
- ---help---
- Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
-
- This driver is also available as a module ( = code which can be
- inserted and removed from the running kernel whenever you want). The
- module will be called vfb. If you want to compile it as a module,
- say M here and read .
-
- If unsure, say N.
-
config FB_PXA_PARAMETERS
bool "PXA LCD command line parameters"
default n
@@ -1506,17 +1429,21 @@ config FB_PXA_PARAMETERS
describes the available parameters.
-config FB_S1D13XXX
- tristate "Epson S1D13XXX framebuffer support"
- depends on FB
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
- help
- Support for S1D13XXX framebuffer device family (currently only
- working with S1D13806). Product specs at
-
+config FB_W100
+ tristate "W100 frame buffer support"
+ depends on FB && PXA_SHARPSL
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called vfb. If you want to compile it as a module,
+ say M here and read .
+
+ If unsure, say N.
config FB_S3C2410
tristate "S3C2410 LCD framebuffer support"
@@ -1524,7 +1451,6 @@ config FB_S3C2410
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
Frame buffer driver for the built-in LCD controller in the Samsung
S3C2410 processor.
@@ -1548,7 +1474,6 @@ config FB_VIRTUAL
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
This is a `virtual' frame buffer device. It operates on a chunk of
unswappable kernel memory instead of on the memory of a graphics