X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;ds=sidebyside;f=drivers%2Frtc%2Frtc-bfin.c;h=a1af4c27939b446b0de1f43d8d61c7a51b610d21;hb=8bad4afe1257585967a1b38cd3f21324b260812b;hp=d90ba860d21678863610a69a3dc9a74f5b9e53bd;hpb=acf63867ae06ef95eea7bf445ded2f05528a81b1;p=linux-2.6 diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c index d90ba860d2..a1af4c2793 100644 --- a/drivers/rtc/rtc-bfin.c +++ b/drivers/rtc/rtc-bfin.c @@ -2,7 +2,7 @@ * Blackfin On-Chip Real Time Clock Driver * Supports BF52[257]/BF53[123]/BF53[467]/BF54[24789] * - * Copyright 2004-2007 Analog Devices Inc. + * Copyright 2004-2008 Analog Devices Inc. * * Enter bugs at http://blackfin.uclinux.org/ * @@ -32,6 +32,15 @@ * writes to clear status registers complete immediately. */ +/* It may seem odd that there is no SWCNT code in here (which would be exposed + * via the periodic interrupt event, or PIE). Since the Blackfin RTC peripheral + * runs in units of seconds (N/HZ) but the Linux framework runs in units of HZ + * (2^N HZ), there is no point in keeping code that only provides 1 HZ PIEs. + * The same exact behavior can be accomplished by using the update interrupt + * event (UIE). Maybe down the line the RTC peripheral will suck less in which + * case we can re-introduce PIE support. + */ + #include #include #include @@ -144,14 +153,13 @@ static void bfin_rtc_sync_pending(struct device *dev) * Initialize the RTC. Enable pre-scaler to scale RTC clock * to 1Hz and clear interrupt/status registers. */ -static void bfin_rtc_reset(struct device *dev) +static void bfin_rtc_reset(struct device *dev, u16 rtc_ictl) { struct bfin_rtc *rtc = dev_get_drvdata(dev); dev_dbg_stamp(dev); bfin_rtc_sync_pending(dev); bfin_write_RTC_PREN(0x1); - bfin_write_RTC_ICTL(RTC_ISTAT_WRITE_COMPLETE); - bfin_write_RTC_SWCNT(0); + bfin_write_RTC_ICTL(rtc_ictl); bfin_write_RTC_ALARM(0); bfin_write_RTC_ISTAT(0xFFFF); rtc->rtc_wrote_regs = 0; @@ -194,14 +202,6 @@ static irqreturn_t bfin_rtc_interrupt(int irq, void *dev_id) } } - if (rtc_ictl & RTC_ISTAT_STOPWATCH) { - if (rtc_istat & RTC_ISTAT_STOPWATCH) { - bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH); - events |= RTC_PF | RTC_IRQF; - bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq); - } - } - if (rtc_ictl & RTC_ISTAT_SEC) { if (rtc_istat & RTC_ISTAT_SEC) { bfin_write_RTC_ISTAT(RTC_ISTAT_SEC); @@ -226,7 +226,7 @@ static int bfin_rtc_open(struct device *dev) ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, to_platform_device(dev)->name, dev); if (!ret) - bfin_rtc_reset(dev); + bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE); return ret; } @@ -234,16 +234,16 @@ static int bfin_rtc_open(struct device *dev) static void bfin_rtc_release(struct device *dev) { dev_dbg_stamp(dev); - bfin_rtc_reset(dev); + bfin_rtc_reset(dev, 0); free_irq(IRQ_RTC, dev); } -static void bfin_rtc_int_set(struct bfin_rtc *rtc, u16 rtc_int) +static void bfin_rtc_int_set(u16 rtc_int) { bfin_write_RTC_ISTAT(rtc_int); bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | rtc_int); } -static void bfin_rtc_int_clear(struct bfin_rtc *rtc, u16 rtc_int) +static void bfin_rtc_int_clear(u16 rtc_int) { bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & rtc_int); } @@ -252,7 +252,7 @@ static void bfin_rtc_int_set_alarm(struct bfin_rtc *rtc) /* Blackfin has different bits for whether the alarm is * more than 24 hours away. */ - bfin_rtc_int_set(rtc, (rtc->rtc_alarm.tm_yday == -1 ? RTC_ISTAT_ALARM : RTC_ISTAT_ALARM_DAY)); + bfin_rtc_int_set(rtc->rtc_alarm.tm_yday == -1 ? RTC_ISTAT_ALARM : RTC_ISTAT_ALARM_DAY); } static int bfin_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) { @@ -264,23 +264,13 @@ static int bfin_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long ar bfin_rtc_sync_pending(dev); switch (cmd) { - case RTC_PIE_ON: - dev_dbg_stamp(dev); - bfin_rtc_int_set(rtc, RTC_ISTAT_STOPWATCH); - bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq); - break; - case RTC_PIE_OFF: - dev_dbg_stamp(dev); - bfin_rtc_int_clear(rtc, ~RTC_ISTAT_STOPWATCH); - break; - case RTC_UIE_ON: dev_dbg_stamp(dev); - bfin_rtc_int_set(rtc, RTC_ISTAT_SEC); + bfin_rtc_int_set(RTC_ISTAT_SEC); break; case RTC_UIE_OFF: dev_dbg_stamp(dev); - bfin_rtc_int_clear(rtc, ~RTC_ISTAT_SEC); + bfin_rtc_int_clear(~RTC_ISTAT_SEC); break; case RTC_AIE_ON: @@ -289,7 +279,7 @@ static int bfin_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long ar break; case RTC_AIE_OFF: dev_dbg_stamp(dev); - bfin_rtc_int_clear(rtc, ~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)); + bfin_rtc_int_clear(~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)); break; default: @@ -371,30 +361,14 @@ static int bfin_rtc_proc(struct device *dev, struct seq_file *seq) seq_printf(seq, "alarm_IRQ\t: %s\n" "wkalarm_IRQ\t: %s\n" - "seconds_IRQ\t: %s\n" - "periodic_IRQ\t: %s\n", + "seconds_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_ALARM), yesno(ictl & RTC_ISTAT_ALARM_DAY), - yesno(ictl & RTC_ISTAT_SEC), - yesno(ictl & RTC_ISTAT_STOPWATCH)); + yesno(ictl & RTC_ISTAT_SEC)); return 0; #undef yesno } -/** - * bfin_irq_set_freq - make sure hardware supports requested freq - * @dev: pointer to RTC device structure - * @freq: requested frequency rate - * - * The Blackfin RTC can only generate periodic events at 1 per - * second (1 Hz), so reject any attempt at changing it. - */ -static int bfin_irq_set_freq(struct device *dev, int freq) -{ - dev_dbg_stamp(dev); - return -ENOTTY; -} - static struct rtc_class_ops bfin_rtc_ops = { .open = bfin_rtc_open, .release = bfin_rtc_release, @@ -404,7 +378,6 @@ static struct rtc_class_ops bfin_rtc_ops = { .read_alarm = bfin_rtc_read_alarm, .set_alarm = bfin_rtc_set_alarm, .proc = bfin_rtc_proc, - .irq_set_freq = bfin_irq_set_freq, }; static int __devinit bfin_rtc_probe(struct platform_device *pdev) @@ -419,14 +392,18 @@ static int __devinit bfin_rtc_probe(struct platform_device *pdev) return -ENOMEM; rtc->rtc_dev = rtc_device_register(pdev->name, &pdev->dev, &bfin_rtc_ops, THIS_MODULE); - if (unlikely(IS_ERR(rtc))) { + if (IS_ERR(rtc)) { ret = PTR_ERR(rtc->rtc_dev); goto err; } - rtc->rtc_dev->irq_freq = 1; + + /* see comment at top of file about stopwatch/PIE */ + bfin_write_RTC_SWCNT(0); platform_set_drvdata(pdev, rtc); + device_init_wakeup(&pdev->dev, 1); + return 0; err: @@ -445,6 +422,32 @@ static int __devexit bfin_rtc_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM +static int bfin_rtc_suspend(struct platform_device *pdev, pm_message_t state) +{ + if (device_may_wakeup(&pdev->dev)) { + enable_irq_wake(IRQ_RTC); + bfin_rtc_sync_pending(&pdev->dev); + } else + bfin_rtc_int_clear(-1); + + return 0; +} + +static int bfin_rtc_resume(struct platform_device *pdev) +{ + if (device_may_wakeup(&pdev->dev)) + disable_irq_wake(IRQ_RTC); + else + bfin_write_RTC_ISTAT(-1); + + return 0; +} +#else +# define bfin_rtc_suspend NULL +# define bfin_rtc_resume NULL +#endif + static struct platform_driver bfin_rtc_driver = { .driver = { .name = "rtc-bfin", @@ -452,6 +455,8 @@ static struct platform_driver bfin_rtc_driver = { }, .probe = bfin_rtc_probe, .remove = __devexit_p(bfin_rtc_remove), + .suspend = bfin_rtc_suspend, + .resume = bfin_rtc_resume, }; static int __init bfin_rtc_init(void) @@ -470,3 +475,4 @@ module_exit(bfin_rtc_exit); MODULE_DESCRIPTION("Blackfin On-Chip Real Time Clock Driver"); MODULE_AUTHOR("Mike Frysinger "); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:rtc-bfin");