X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;ds=sidebyside;f=drivers%2Fide%2Fsetup-pci.c;h=2dc3835478eccf2ca142ce492114eedc6371a3e4;hb=1baccff8a5823b51d7bf2740ef3ef17e06bfa7e2;hp=8ff5a0ef10adc35bc4e50c7dc4892b03fcf91617;hpb=59bca8cc995428c34d8cdfadfa87c8e3f01c4340;p=linux-2.6 diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 8ff5a0ef10..2dc3835478 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -40,17 +40,6 @@ static ide_hwif_t *ide_match_hwif(unsigned long io_base, u8 bootable, const char int h; ide_hwif_t *hwif; - /* - * Look for a hwif with matching io_base specified using - * parameters to ide_setup(). - */ - for (h = 0; h < MAX_HWIFS; ++h) { - hwif = &ide_hwifs[h]; - if (hwif->io_ports[IDE_DATA_OFFSET] == io_base) { - if (hwif->chipset == ide_forced) - return hwif; /* a perfect match */ - } - } /* * Look for a hwif with matching io_base default value. * If chipset is "ide_unknown", then claim that hwif slot. @@ -228,7 +217,9 @@ EXPORT_SYMBOL_GPL(ide_setup_pci_noise); * @d: IDE port info * * Enable the IDE PCI device. We attempt to enable the device in full - * but if that fails then we only need BAR4 so we will enable that. + * but if that fails then we only need IO space. The PCI code should + * have setup the proper resources for us already for controllers in + * legacy mode. * * Returns zero on success or an error code */ @@ -238,7 +229,7 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d) int ret; if (pci_enable_device(dev)) { - ret = pci_enable_device_bars(dev, 1 << 4); + ret = pci_enable_device_io(dev); if (ret < 0) { printk(KERN_WARNING "%s: (ide_setup_pci_device:) " "Could not enable device.\n", d->name); @@ -310,11 +301,12 @@ static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d) * @d: IDE port info * @bar: BAR number * - * Checks if a BAR is configured and points to MMIO space. If so - * print an error and return an error code. Otherwise return 0 + * Checks if a BAR is configured and points to MMIO space. If so, + * return an error code. Otherwise return 0 */ -static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *d, int bar) +static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *d, + int bar) { ulong flags = pci_resource_flags(dev, bar); @@ -322,14 +314,11 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info * if (!flags || pci_resource_len(dev, bar) == 0) return 0; - /* I/O space */ - if(flags & PCI_BASE_ADDRESS_IO_MASK) + /* I/O space */ + if (flags & IORESOURCE_IO) return 0; /* Bad */ - printk(KERN_ERR "%s: IO baseregs (BIOS) are reported " - "as MEM, report to " - ".\n", d->name); return -EINVAL; } @@ -337,7 +326,8 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info * * ide_hwif_configure - configure an IDE interface * @dev: PCI device holding interface * @d: IDE port info - * @mate: Paired interface if any + * @port: port number + * @irq: PCI IRQ * * Perform the initial set up for the hardware interface structure. This * is done per interface port rather than per PCI device. There may be @@ -346,18 +336,22 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info * * Returns the new hardware interface structure, or NULL on a failure */ -static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, const struct ide_port_info *d, ide_hwif_t *mate, int port, int irq) +static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, + const struct ide_port_info *d, + unsigned int port, int irq) { unsigned long ctl = 0, base = 0; ide_hwif_t *hwif; u8 bootable = (d->host_flags & IDE_HFLAG_BOOTABLE) ? 1 : 0; - u8 oldnoprobe = 0; struct hw_regs_s hw; if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) { - /* Possibly we should fail if these checks report true */ - ide_pci_check_iomem(dev, d, 2*port); - ide_pci_check_iomem(dev, d, 2*port+1); + if (ide_pci_check_iomem(dev, d, 2 * port) || + ide_pci_check_iomem(dev, d, 2 * port + 1)) { + printk(KERN_ERR "%s: I/O baseregs (BIOS) are reported " + "as MEM for port %d!\n", d->name, port); + return NULL; + } ctl = pci_resource_start(dev, 2*port+1); base = pci_resource_start(dev, 2*port); @@ -377,44 +371,33 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, const struct ide_port return NULL; /* no room in ide_hwifs[] */ memset(&hw, 0, sizeof(hw)); - hw.irq = hwif->irq ? hwif->irq : irq; + hw.irq = irq; hw.dev = &dev->dev; hw.chipset = d->chipset ? d->chipset : ide_pci; ide_std_init_ports(&hw, base, ctl | 2); - if (hwif->io_ports[IDE_DATA_OFFSET] == base && - hwif->io_ports[IDE_CONTROL_OFFSET] == (ctl | 2)) - oldnoprobe = hwif->noprobe; - ide_init_port_hw(hwif, &hw); - hwif->noprobe = oldnoprobe; - hwif->dev = &dev->dev; hwif->cds = d; - hwif->channel = port; - if (mate) { - hwif->mate = mate; - mate->mate = hwif; - } return hwif; } +#ifdef CONFIG_BLK_DEV_IDEDMA_PCI /** * ide_hwif_setup_dma - configure DMA interface - * @dev: PCI device - * @d: IDE port info * @hwif: IDE interface + * @d: IDE port info * * Set up the DMA base for the interface. Enable the master bits as * necessary and attempt to bring the device DMA into a ready to use * state */ -static void ide_hwif_setup_dma(struct pci_dev *dev, const struct ide_port_info *d, ide_hwif_t *hwif) +void ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d) { -#ifdef CONFIG_BLK_DEV_IDEDMA_PCI + struct pci_dev *dev = to_pci_dev(hwif->dev); u16 pcicmd; pci_read_config_word(dev, PCI_COMMAND, &pcicmd); @@ -446,8 +429,8 @@ static void ide_hwif_setup_dma(struct pci_dev *dev, const struct ide_port_info * "(BIOS)\n", hwif->name, d->name); } } -#endif /* CONFIG_BLK_DEV_IDEDMA_PCI*/ } +#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ /** * ide_setup_pci_controller - set up IDE PCI @@ -509,7 +492,7 @@ out: void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int pciirq, u8 *idx) { int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port; - ide_hwif_t *hwif, *mate = NULL; + ide_hwif_t *hwif; u8 tmp; /* @@ -525,56 +508,11 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int continue; /* port not enabled */ } - if ((hwif = ide_hwif_configure(dev, d, mate, port, pciirq)) == NULL) + hwif = ide_hwif_configure(dev, d, port, pciirq); + if (hwif == NULL) continue; *(idx + port) = hwif->index; - - if (d->init_iops) - d->init_iops(hwif); - - if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) - ide_hwif_setup_dma(dev, d, hwif); - - if ((!hwif->irq && (d->host_flags & IDE_HFLAG_LEGACY_IRQS)) || - (d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS)) - hwif->irq = port ? 15 : 14; - - hwif->host_flags = d->host_flags; - hwif->pio_mask = d->pio_mask; - - if ((d->host_flags & IDE_HFLAG_SERIALIZE) && hwif->mate) - hwif->mate->serialized = hwif->serialized = 1; - - if (d->host_flags & IDE_HFLAG_IO_32BIT) { - hwif->drives[0].io_32bit = 1; - hwif->drives[1].io_32bit = 1; - } - - if (d->host_flags & IDE_HFLAG_UNMASK_IRQS) { - hwif->drives[0].unmask = 1; - hwif->drives[1].unmask = 1; - } - - if (hwif->dma_base) { - hwif->swdma_mask = d->swdma_mask; - hwif->mwdma_mask = d->mwdma_mask; - hwif->ultra_mask = d->udma_mask; - } - - hwif->drives[0].autotune = 1; - hwif->drives[1].autotune = 1; - - if (d->host_flags & IDE_HFLAG_RQSIZE_256) - hwif->rqsize = 256; - - if (d->init_hwif) - /* Call chipset-specific routine - * for each enabled hwif - */ - d->init_hwif(hwif); - - mate = hwif; } } @@ -656,7 +594,7 @@ int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d) ret = do_ide_setup_pci_device(dev, d, &idx[0], 1); if (ret >= 0) - ide_device_add(idx); + ide_device_add(idx, d); return ret; } @@ -680,7 +618,7 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2, goto out; } - ide_device_add(idx); + ide_device_add(idx, d); out: return ret; }