#include <sound/core.h>
#include "hda_codec.h"
#include "hda_local.h"
+#define NUM_PINS 11
/* board config type */
CMI_FULL, /* back 6-jack + front-panel 2-jack */
CMI_FULL_DIG, /* back 6-jack + front-panel 2-jack + digital I/O */
CMI_ALLOUT, /* back 5-jack + front-panel 2-jack + digital out */
+ CMI_AUTO, /* let driver guess it */
};
struct cmi_spec {
/* playback */
struct hda_multi_out multiout;
+ hda_nid_t dac_nids[4]; /* NID for each DAC */
+ int num_dacs;
/* capture */
hda_nid_t *adc_nids;
const struct cmi_channel_mode *channel_modes;
struct hda_pcm pcm_rec[2]; /* PCM information */
+
+ /* pin deafault configuration */
+ hda_nid_t pin_nid[NUM_PINS];
+ unsigned int def_conf[NUM_PINS];
+ unsigned int pin_def_confs;
+
+ /* multichannel pins */
+ hda_nid_t multich_pin[4]; /* max 8-channel */
+ struct hda_verb multi_init[9]; /* 2 verbs for each pin + terminator */
};
+/* amp values */
+#define AMP_IN_MUTE(idx) (0x7080 | ((idx)<<8))
+#define AMP_IN_UNMUTE(idx) (0x7000 | ((idx)<<8))
+#define AMP_OUT_MUTE 0xb080
+#define AMP_OUT_UNMUTE 0xb000
+#define AMP_OUT_ZERO 0xb000
+/* pinctl values */
+#define PIN_IN 0x20
+#define PIN_VREF80 0x24
+#define PIN_VREF50 0x21
+#define PIN_OUT 0x40
+#define PIN_HP 0xc0
+
/*
* input MUX
*/
/* 3-stack / 2 channel */
static struct hda_verb cmi9880_ch2_init[] = {
/* set line-in PIN for input */
- { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
/* set mic PIN for input, also enable vref */
- { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
/* route front PCM (DAC1) to HP */
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
{}
/* 3-stack / 6 channel */
static struct hda_verb cmi9880_ch6_init[] = {
/* set line-in PIN for output */
- { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
/* set mic PIN for output */
- { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
/* route front PCM (DAC1) to HP */
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
{}
/* 3-stack+front / 8 channel */
static struct hda_verb cmi9880_ch8_init[] = {
/* set line-in PIN for output */
- { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
/* set mic PIN for output */
- { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
/* route rear-surround PCM (DAC4) to HP */
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x03 },
{}
*/
static struct hda_verb cmi9880_basic_init[] = {
/* port-D for line out (rear panel) */
- { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
+ { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* port-E for HP out (front panel) */
- { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
+ { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* route front PCM to HP */
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
/* port-A for surround (rear panel) */
- { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
+ { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* port-G for CLFE (rear panel) */
- { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
+ { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
+ { 0x1f, AC_VERB_SET_CONNECT_SEL, 0x02 },
/* port-H for side (rear panel) */
- { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
+ { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
+ { 0x20, AC_VERB_SET_CONNECT_SEL, 0x01 },
/* port-C for line-in (rear panel) */
- { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
/* port-B for mic-in (rear panel) with vref */
- { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
/* port-F for mic-in (front panel) with vref */
- { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+ { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
/* CD-in */
- { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+ { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
/* route front mic to ADC1/2 */
{ 0x08, AC_VERB_SET_CONNECT_SEL, 0x05 },
{ 0x09, AC_VERB_SET_CONNECT_SEL, 0x05 },
static struct hda_verb cmi9880_allout_init[] = {
/* port-D for line out (rear panel) */
- { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
+ { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* port-E for HP out (front panel) */
- { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
+ { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* route front PCM to HP */
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
/* port-A for side (rear panel) */
- { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
+ { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* port-G for CLFE (rear panel) */
- { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
+ { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
+ { 0x1f, AC_VERB_SET_CONNECT_SEL, 0x02 },
+ /* port-H for side (rear panel) */
+ { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
+ { 0x20, AC_VERB_SET_CONNECT_SEL, 0x01 },
/* port-C for surround (rear panel) */
- { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
+ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* port-B for mic-in (rear panel) with vref */
- { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
/* port-F for mic-in (front panel) with vref */
- { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+ { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
/* CD-in */
- { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+ { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
/* route front mic to ADC1/2 */
{ 0x08, AC_VERB_SET_CONNECT_SEL, 0x05 },
{ 0x09, AC_VERB_SET_CONNECT_SEL, 0x05 },
return 0;
}
+/* fill in the multi_dac_nids table, which will decide
+ which audio widget to use for each channel */
+static int cmi9880_fill_multi_dac_nids(struct hda_codec *codec, const struct auto_pin_cfg *cfg)
+{
+ struct cmi_spec *spec = codec->spec;
+ hda_nid_t nid;
+ int assigned[4];
+ int i, j;
+
+ /* clear the table, only one c-media dac assumed here */
+ memset(spec->dac_nids, 0, sizeof(spec->dac_nids));
+ memset(assigned, 0, sizeof(assigned));
+ /* check the pins we found */
+ for (i = 0; i < cfg->line_outs; i++) {
+ nid = cfg->line_out_pins[i];
+ /* nid 0x0b~0x0e is hardwired to audio widget 0x3~0x6 */
+ if (nid >= 0x0b && nid <= 0x0e) {
+ spec->dac_nids[i] = (nid - 0x0b) + 0x03;
+ assigned[nid - 0x0b] = 1;
+ }
+ }
+ /* left pin can be connect to any audio widget */
+ for (i = 0; i < cfg->line_outs; i++) {
+ nid = cfg->line_out_pins[i];
+ if (nid <= 0x0e)
+ continue;
+ /* search for an empty channel */
+ for (j = 0; j < cfg->line_outs; j++) {
+ if (! assigned[j]) {
+ spec->dac_nids[i] = j + 0x03;
+ assigned[j] = 1;
+ break;
+ }
+ }
+ }
+ spec->num_dacs = cfg->line_outs;
+ return 0;
+}
+
+/* create multi_init table, which is used for multichannel initialization */
+static int cmi9880_fill_multi_init(struct hda_codec *codec, const struct auto_pin_cfg *cfg)
+{
+ struct cmi_spec *spec = codec->spec;
+ hda_nid_t nid;
+ int i, j, k, len;
+
+ /* clear the table, only one c-media dac assumed here */
+ memset(spec->multi_init, 0, sizeof(spec->multi_init));
+ for (j = 0, i = 0; i < cfg->line_outs; i++) {
+ hda_nid_t conn[4];
+ nid = cfg->line_out_pins[i];
+ /* set as output */
+ spec->multi_init[j].nid = nid;
+ spec->multi_init[j].verb = AC_VERB_SET_PIN_WIDGET_CONTROL;
+ spec->multi_init[j].param = PIN_OUT;
+ j++;
+ if (nid > 0x0e) {
+ /* set connection */
+ spec->multi_init[j].nid = nid;
+ spec->multi_init[j].verb = AC_VERB_SET_CONNECT_SEL;
+ spec->multi_init[j].param = 0;
+ /* find the index in connect list */
+ len = snd_hda_get_connections(codec, nid, conn, 4);
+ for (k = 0; k < len; k++)
+ if (conn[k] == spec->dac_nids[i]) {
+ spec->multi_init[j].param = k;
+ break;
+ }
+ j++;
+ }
+ }
+ return 0;
+}
+
static int cmi9880_init(struct hda_codec *codec)
{
struct cmi_spec *spec = codec->spec;
snd_hda_sequence_write(codec, cmi9880_allout_init);
else
snd_hda_sequence_write(codec, cmi9880_basic_init);
+ if (spec->board_config == CMI_AUTO)
+ snd_hda_sequence_write(codec, spec->multi_init);
return 0;
}
{ .modelname = "min_fp", .config = CMI_MIN_FP },
{ .modelname = "full", .config = CMI_FULL },
{ .modelname = "full_dig", .config = CMI_FULL_DIG },
+ { .pci_subvendor = 0x1043, .pci_subdevice = 0x813d, .config = CMI_FULL_DIG }, /* ASUS P5AD2 */
{ .modelname = "allout", .config = CMI_ALLOUT },
+ { .modelname = "auto", .config = CMI_AUTO },
{} /* terminator */
};
codec->spec = spec;
spec->board_config = snd_hda_check_board_config(codec, cmi9880_cfg_tbl);
if (spec->board_config < 0) {
- snd_printd(KERN_INFO "hda_codec: Unknown model for CMI9880\n");
- spec->board_config = CMI_FULL_DIG; /* try everything */
+ snd_printdd(KERN_INFO "hda_codec: Unknown model for CMI9880\n");
+ spec->board_config = CMI_AUTO; /* try everything */
}
+ /* copy default DAC NIDs */
+ memcpy(spec->dac_nids, cmi9880_dac_nids, sizeof(spec->dac_nids));
+ spec->num_dacs = 4;
+
switch (spec->board_config) {
case CMI_MINIMAL:
case CMI_MIN_FP:
spec->input_mux = &cmi9880_no_line_mux;
spec->multiout.dig_out_nid = CMI_DIG_OUT_NID;
break;
+ case CMI_AUTO:
+ {
+ unsigned int port_e, port_f, port_g, port_h;
+ unsigned int port_spdifi, port_spdifo;
+ struct auto_pin_cfg cfg;
+
+ /* collect pin default configuration */
+ port_e = snd_hda_codec_read(codec, 0x0f, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
+ port_f = snd_hda_codec_read(codec, 0x10, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
+ spec->front_panel = 1;
+ if (get_defcfg_connect(port_e) == AC_JACK_PORT_NONE ||
+ get_defcfg_connect(port_f) == AC_JACK_PORT_NONE) {
+ port_g = snd_hda_codec_read(codec, 0x1f, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
+ port_h = snd_hda_codec_read(codec, 0x20, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
+ spec->surr_switch = 1;
+ /* no front panel */
+ if (get_defcfg_connect(port_g) == AC_JACK_PORT_NONE ||
+ get_defcfg_connect(port_h) == AC_JACK_PORT_NONE) {
+ /* no optional rear panel */
+ spec->board_config = CMI_MINIMAL;
+ spec->front_panel = 0;
+ spec->num_ch_modes = 2;
+ } else {
+ spec->board_config = CMI_MIN_FP;
+ spec->num_ch_modes = 3;
+ }
+ spec->channel_modes = cmi9880_channel_modes;
+ spec->input_mux = &cmi9880_basic_mux;
+ spec->multiout.max_channels = cmi9880_channel_modes[0].channels;
+ } else {
+ spec->input_mux = &cmi9880_basic_mux;
+ port_spdifi = snd_hda_codec_read(codec, 0x13, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
+ port_spdifo = snd_hda_codec_read(codec, 0x12, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
+ if (get_defcfg_connect(port_spdifo) != AC_JACK_PORT_NONE)
+ spec->multiout.dig_out_nid = CMI_DIG_OUT_NID;
+ if (get_defcfg_connect(port_spdifi) != AC_JACK_PORT_NONE)
+ spec->dig_in_nid = CMI_DIG_IN_NID;
+ spec->multiout.max_channels = 8;
+ }
+ snd_hda_parse_pin_def_config(codec, &cfg);
+ if (cfg.line_outs) {
+ spec->multiout.max_channels = cfg.line_outs * 2;
+ cmi9880_fill_multi_dac_nids(codec, &cfg);
+ cmi9880_fill_multi_init(codec, &cfg);
+ } else
+ snd_printd("patch_cmedia: cannot detect association in defcfg\n");
+ break;
+ }
}
- spec->multiout.num_dacs = 4;
- spec->multiout.dac_nids = cmi9880_dac_nids;
+ spec->multiout.num_dacs = spec->num_dacs;
+ spec->multiout.dac_nids = spec->dac_nids;
spec->adc_nids = cmi9880_adc_nids;
projects / linux-2.6 / blobdiff