To compile this driver as a module, choose M here: the module
will be called snd-au8830.
+config SND_AW2
+ tristate "Emagic Audiowerk 2"
+ depends on SND
+ help
+ Say Y here to include support for Emagic Audiowerk 2 soundcards.
+
+ Supported features: Analog and SPDIF output. Analog or SPDIF input.
+ Note: Switch between analog and digital input does not always work.
+ It can produce continuous noise. The workaround is to switch again
+ (and again) between digital and analog input until it works.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-aw2.
+
+
config SND_AZT3328
tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)"
depends on SND && EXPERIMENTAL
depends on SND
select SND_AC97_CODEC
select SND_RAWMIDI
+ select SND_VMASTER
help
Say Y here to include support for the Sound Blaster Audigy LS
and Live 24bit.
To compile this driver as a module, choose M here: the module
will be called snd-cmipci.
+config SND_OXYGEN_LIB
+ tristate
+ depends on SND
+ select SND_PCM
+ select SND_MPU401_UART
+
+config SND_OXYGEN
+ tristate "C-Media 8788 (Oxygen)"
+ depends on SND
+ select SND_OXYGEN_LIB
+ help
+ Say Y here to include support for sound cards based on the
+ C-Media CMI8788 (Oxygen HD Audio) chip:
+ * Asound A-8788
+ * AuzenTech X-Meridian
+ * Bgears b-Enspirer
+ * Club3D Theatron DTS
+ * HT-Omega Claro
+ * Razer Barracuda AC-1
+ * Sondigo Inferno
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-oxygen.
+
config SND_CS4281
tristate "Cirrus Logic (Sound Fusion) CS4281"
depends on SND
tristate "Intel HD Audio"
depends on SND
select SND_PCM
+ select SND_VMASTER
help
Say Y here to include support for Intel "High Definition
Audio" (Azalia) motherboard devices.
select SND_HWDEP
help
Say Y here to build a hwdep interface for HD-audio driver.
- This interface can be used for out-of-bound communication
+ This interface can be used for out-of-band communication
with codecs for debugging purposes.
config SND_HDA_CODEC_REALTEK
HD-audio driver. The power-saving timeout can be configured
via power_save option or over sysfs on-the-fly.
+config SND_HDA_POWER_SAVE_DEFAULT
+ int "Default time-out for HD-audio power-save mode"
+ depends on SND_HDA_POWER_SAVE
+ default 0
+ help
+ The default time-out value in seconds for HD-audio automatic
+ power-save mode. 0 means to disable the power-save mode.
+
config SND_HDSP
tristate "RME Hammerfall DSP Audio"
depends on SND
To compile this driver as a module, choose M here: the module
will be called snd-hdspm.
+config SND_HIFIER
+ tristate "TempoTec HiFier Fantasia"
+ depends on SND
+ select SND_OXYGEN_LIB
+ help
+ Say Y here to include support for the MediaTek/TempoTec HiFier
+ Fantasia sound card.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-hifier.
+
config SND_ICE1712
tristate "ICEnsemble ICE1712 (Envy24)"
depends on SND
depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
+ select SND_VMASTER
help
Say Y here to include support for soundcards based on
ICE/VT1724/1720 (Envy24HT/PT) chips.
To compile this driver as a module, choose M here: the module
will be called snd-rme9652.
+config SND_SIS7019
+ tristate "SiS 7019 Audio Accelerator"
+ depends on SND && X86 && !X86_64
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for the SiS 7019 Audio Accelerator.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-sis7019.
+
config SND_SONICVIBES
tristate "S3 SonicVibes"
depends on SND
To compile this driver as a module, choose M here: the module
will be called snd-via82xx-modem.
+config SND_VIRTUOSO
+ tristate "Asus Virtuoso 100/200 (Xonar)"
+ depends on SND
+ select SND_OXYGEN_LIB
+ help
+ Say Y here to include support for sound cards based on the
+ Asus AV100/AV200 chips, i.e., Xonar D2, DX and D2X.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-virtuoso.
+
config SND_VX222
tristate "Digigram VX222"
depends on SND
snd-ac97-codec driver. You can toggle it dynamically over
sysfs, too.
+config SND_AC97_POWER_SAVE_DEFAULT
+ int "Default time-out for AC97 power-save mode"
+ depends on SND_AC97_POWER_SAVE
+ default 0
+ help
+ The default time-out value in seconds for AC97 automatic
+ power-save mode. 0 means to disable the power-save mode.
+
endmenu