To compile this driver as a module, choose M here: the module
will be called snd-au8830.
+config SND_AW2
+ tristate "Emagic Audiowerk 2"
+ depends on SND
+ help
+ Say Y here to include support for Emagic Audiowerk 2 soundcards.
+
+ Supported features: Analog and SPDIF output. Analog or SPDIF input.
+ Note: Switch between analog and digital input does not always work.
+ It can produce continuous noise. The workaround is to switch again
+ (and again) between digital and analog input until it works.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-aw2.
+
+
config SND_AZT3328
tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)"
depends on SND && EXPERIMENTAL
depends on SND
select SND_AC97_CODEC
select SND_RAWMIDI
+ select SND_VMASTER
help
Say Y here to include support for the Sound Blaster Audigy LS
and Live 24bit.
To compile this driver as a module, choose M here: the module
will be called snd-cmipci.
+config SND_OXYGEN_LIB
+ tristate
+ depends on SND
+ select SND_PCM
+ select SND_MPU401_UART
+
+config SND_OXYGEN
+ tristate "C-Media 8788 (Oxygen)"
+ depends on SND
+ select SND_OXYGEN_LIB
+ help
+ Say Y here to include support for sound cards based on the
+ C-Media CMI8788 (Oxygen HD Audio) chip:
+ * Asound A-8788
+ * AuzenTech X-Meridian
+ * Bgears b-Enspirer
+ * Club3D Theatron DTS
+ * HT-Omega Claro
+ * Razer Barracuda AC-1
+ * Sondigo Inferno
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-oxygen.
+
config SND_CS4281
tristate "Cirrus Logic (Sound Fusion) CS4281"
depends on SND
config SND_FM801_TEA575X_BOOL
bool "ForteMedia FM801 + TEA5757 tuner"
depends on SND_FM801
+ depends on VIDEO_V4L1=y || VIDEO_V4L1=SND_FM801
help
Say Y here to include support for soundcards based on the ForteMedia
FM801 chip with a TEA5757 tuner connected to GPIO1-3 pins (Media
Forte SF256-PCS-02) into the snd-fm801 driver.
- This will enable support for the old V4L1 API.
-
config SND_FM801_TEA575X
tristate
depends on SND_FM801_TEA575X_BOOL
default SND_FM801
- select VIDEO_V4L1
- select VIDEO_DEV
config SND_HDA_INTEL
tristate "Intel HD Audio"
depends on SND
select SND_PCM
+ select SND_VMASTER
help
Say Y here to include support for Intel "High Definition
Audio" (Azalia) motherboard devices.
To compile this driver as a module, choose M here: the module
will be called snd-hdspm.
+config SND_HIFIER
+ tristate "TempoTec HiFier Fantasia"
+ depends on SND
+ select SND_OXYGEN_LIB
+ help
+ Say Y here to include support for the MediaTek/TempoTec HiFier
+ Fantasia sound card.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-hifier.
+
config SND_ICE1712
tristate "ICEnsemble ICE1712 (Envy24)"
depends on SND
depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
+ select SND_VMASTER
help
Say Y here to include support for soundcards based on
ICE/VT1724/1720 (Envy24HT/PT) chips.
config SND_KORG1212
tristate "Korg 1212 IO"
depends on SND
- select FW_LOADER if !SND_KORG1212_FIRMWARE_IN_KERNEL
select SND_PCM
help
Say Y here to include support for Korg 1212IO soundcards.
To compile this driver as a module, choose M here: the module
will be called snd-korg1212.
-config SND_KORG1212_FIRMWARE_IN_KERNEL
- bool "In-kernel firmware for Korg1212 driver"
- depends on SND_KORG1212
- default y
- help
- Say Y here to include the static firmware built in the kernel
- for the Korg1212 driver. If you choose N here, you need to
- install the firmware files from the alsa-firmware package.
-
config SND_MAESTRO3
tristate "ESS Allegro/Maestro3"
depends on SND
- select FW_LOADER if !SND_MAESTRO3_FIRMWARE_IN_KERNEL
select SND_AC97_CODEC
help
Say Y here to include support for soundcards based on ESS Maestro 3
To compile this driver as a module, choose M here: the module
will be called snd-maestro3.
-config SND_MAESTRO3_FIRMWARE_IN_KERNEL
- bool "In-kernel firmware for Maestro3 driver"
- depends on SND_MAESTRO3
- default y
- help
- Say Y here to include the static firmware built in the kernel
- for the Maestro3 driver. If you choose N here, you need to
- install the firmware files from the alsa-firmware package.
-
config SND_MIXART
tristate "Digigram miXart"
depends on SND
To compile this driver as a module, choose M here: the module
will be called snd-rme9652.
+config SND_SIS7019
+ tristate "SiS 7019 Audio Accelerator"
+ depends on SND && X86 && !X86_64
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for the SiS 7019 Audio Accelerator.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-sis7019.
+
config SND_SONICVIBES
tristate "S3 SonicVibes"
depends on SND
To compile this driver as a module, choose M here: the module
will be called snd-via82xx-modem.
+config SND_VIRTUOSO
+ tristate "Asus Virtuoso 100/200 (Xonar)"
+ depends on SND
+ select SND_OXYGEN_LIB
+ help
+ Say Y here to include support for sound cards based on the
+ Asus AV100/AV200 chips, i.e., Xonar D2, DX and D2X.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-virtuoso.
+
config SND_VX222
tristate "Digigram VX222"
depends on SND