rqstp->rq_arg.tail[0].iov_len = 0;
}
-struct chunk_sge {
- int start; /* sge no for this chunk */
- int count; /* sge count for this chunk */
-};
-
/* Encode a read-chunk-list as an array of IB SGE
*
* Assumptions:
struct svc_rqst *rqstp,
struct svc_rdma_op_ctxt *head,
struct rpcrdma_msg *rmsgp,
- struct ib_sge *sge,
- struct chunk_sge *ch_sge_ary,
+ struct svc_rdma_req_map *rpl_map,
+ struct svc_rdma_req_map *chl_map,
int ch_count,
int byte_count)
{
head->arg.head[0] = rqstp->rq_arg.head[0];
head->arg.tail[0] = rqstp->rq_arg.tail[0];
head->arg.pages = &head->pages[head->count];
- head->sge[0].length = head->count; /* save count of hdr pages */
+ head->hdr_count = head->count; /* save count of hdr pages */
head->arg.page_base = 0;
head->arg.page_len = ch_bytes;
head->arg.len = rqstp->rq_arg.len + ch_bytes;
head->arg.buflen = rqstp->rq_arg.buflen + ch_bytes;
head->count++;
- ch_sge_ary[0].start = 0;
+ chl_map->ch[0].start = 0;
while (byte_count) {
+ rpl_map->sge[sge_no].iov_base =
+ page_address(rqstp->rq_arg.pages[page_no]) + page_off;
sge_bytes = min_t(int, PAGE_SIZE-page_off, ch_bytes);
- sge[sge_no].addr =
- ib_dma_map_page(xprt->sc_cm_id->device,
- rqstp->rq_arg.pages[page_no],
- page_off, sge_bytes,
- DMA_FROM_DEVICE);
- sge[sge_no].length = sge_bytes;
- sge[sge_no].lkey = xprt->sc_phys_mr->lkey;
+ rpl_map->sge[sge_no].iov_len = sge_bytes;
/*
* Don't bump head->count here because the same page
* may be used by multiple SGE.
* SGE, move to the next SGE
*/
if (ch_bytes == 0) {
- ch_sge_ary[ch_no].count =
- sge_no - ch_sge_ary[ch_no].start;
+ chl_map->ch[ch_no].count =
+ sge_no - chl_map->ch[ch_no].start;
ch_no++;
ch++;
- ch_sge_ary[ch_no].start = sge_no;
+ chl_map->ch[ch_no].start = sge_no;
ch_bytes = ch->rc_target.rs_length;
/* If bytes remaining account for next chunk */
if (byte_count) {
return sge_no;
}
-static void rdma_set_ctxt_sge(struct svc_rdma_op_ctxt *ctxt,
- struct ib_sge *sge,
+static void rdma_set_ctxt_sge(struct svcxprt_rdma *xprt,
+ struct svc_rdma_op_ctxt *ctxt,
+ struct kvec *vec,
u64 *sgl_offset,
int count)
{
int i;
ctxt->count = count;
+ ctxt->direction = DMA_FROM_DEVICE;
for (i = 0; i < count; i++) {
- ctxt->sge[i].addr = sge[i].addr;
- ctxt->sge[i].length = sge[i].length;
- *sgl_offset = *sgl_offset + sge[i].length;
+ atomic_inc(&xprt->sc_dma_used);
+ ctxt->sge[i].addr =
+ ib_dma_map_single(xprt->sc_cm_id->device,
+ vec[i].iov_base, vec[i].iov_len,
+ DMA_FROM_DEVICE);
+ ctxt->sge[i].length = vec[i].iov_len;
+ ctxt->sge[i].lkey = xprt->sc_phys_mr->lkey;
+ *sgl_offset = *sgl_offset + vec[i].iov_len;
}
}
* On our side, we need to read into a pagelist. The first page immediately
* follows the RPC header.
*
- * This function returns 1 to indicate success. The data is not yet in
+ * This function returns:
+ * 0 - No error and no read-list found.
+ *
+ * 1 - Successful read-list processing. The data is not yet in
* the pagelist and therefore the RPC request must be deferred. The
* I/O completion will enqueue the transport again and
* svc_rdma_recvfrom will complete the request.
*
+ * <0 - Error processing/posting read-list.
+ *
* NOTE: The ctxt must not be touched after the last WR has been posted
* because the I/O completion processing may occur on another
* processor and free / modify the context. Ne touche pas!
struct ib_send_wr read_wr;
int err = 0;
int ch_no;
- struct ib_sge *sge;
int ch_count;
int byte_count;
int sge_count;
u64 sgl_offset;
struct rpcrdma_read_chunk *ch;
struct svc_rdma_op_ctxt *ctxt = NULL;
- struct svc_rdma_op_ctxt *head;
- struct svc_rdma_op_ctxt *tmp_sge_ctxt;
- struct svc_rdma_op_ctxt *tmp_ch_ctxt;
- struct chunk_sge *ch_sge_ary;
+ struct svc_rdma_req_map *rpl_map;
+ struct svc_rdma_req_map *chl_map;
/* If no read list is present, return 0 */
ch = svc_rdma_get_read_chunk(rmsgp);
if (!ch)
return 0;
- /* Allocate temporary contexts to keep SGE */
- BUG_ON(sizeof(struct ib_sge) < sizeof(struct chunk_sge));
- tmp_sge_ctxt = svc_rdma_get_context(xprt);
- sge = tmp_sge_ctxt->sge;
- tmp_ch_ctxt = svc_rdma_get_context(xprt);
- ch_sge_ary = (struct chunk_sge *)tmp_ch_ctxt->sge;
+ /* Allocate temporary reply and chunk maps */
+ rpl_map = svc_rdma_get_req_map();
+ chl_map = svc_rdma_get_req_map();
svc_rdma_rcl_chunk_counts(ch, &ch_count, &byte_count);
+ if (ch_count > RPCSVC_MAXPAGES)
+ return -EINVAL;
sge_count = rdma_rcl_to_sge(xprt, rqstp, hdr_ctxt, rmsgp,
- sge, ch_sge_ary,
+ rpl_map, chl_map,
ch_count, byte_count);
- head = svc_rdma_get_context(xprt);
sgl_offset = 0;
ch_no = 0;
for (ch = (struct rpcrdma_read_chunk *)&rmsgp->rm_body.rm_chunks[0];
ch->rc_discrim != 0; ch++, ch_no++) {
next_sge:
- if (!ctxt)
- ctxt = head;
- else {
- ctxt->next = svc_rdma_get_context(xprt);
- ctxt = ctxt->next;
- }
- ctxt->next = NULL;
+ ctxt = svc_rdma_get_context(xprt);
ctxt->direction = DMA_FROM_DEVICE;
- clear_bit(RDMACTXT_F_READ_DONE, &ctxt->flags);
clear_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags);
/* Prepare READ WR */
read_wr.wr.rdma.remote_addr =
get_unaligned(&(ch->rc_target.rs_offset)) +
sgl_offset;
- read_wr.sg_list = &sge[ch_sge_ary[ch_no].start];
+ read_wr.sg_list = ctxt->sge;
read_wr.num_sge =
- rdma_read_max_sge(xprt, ch_sge_ary[ch_no].count);
- rdma_set_ctxt_sge(ctxt, &sge[ch_sge_ary[ch_no].start],
+ rdma_read_max_sge(xprt, chl_map->ch[ch_no].count);
+ rdma_set_ctxt_sge(xprt, ctxt,
+ &rpl_map->sge[chl_map->ch[ch_no].start],
&sgl_offset,
read_wr.num_sge);
if (((ch+1)->rc_discrim == 0) &&
- (read_wr.num_sge == ch_sge_ary[ch_no].count)) {
+ (read_wr.num_sge == chl_map->ch[ch_no].count)) {
/*
* Mark the last RDMA_READ with a bit to
* indicate all RPC data has been fetched from
* the client and the RPC needs to be enqueued.
*/
set_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags);
- ctxt->next = hdr_ctxt;
- hdr_ctxt->next = head;
+ ctxt->read_hdr = hdr_ctxt;
}
/* Post the read */
err = svc_rdma_send(xprt, &read_wr);
if (err) {
- printk(KERN_ERR "svcrdma: Error posting send = %d\n",
+ printk(KERN_ERR "svcrdma: Error %d posting RDMA_READ\n",
err);
- /*
- * Break the circular list so free knows when
- * to stop if the error happened to occur on
- * the last read
- */
- ctxt->next = NULL;
+ set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
+ svc_rdma_put_context(ctxt, 0);
goto out;
}
atomic_inc(&rdma_stat_read);
- if (read_wr.num_sge < ch_sge_ary[ch_no].count) {
- ch_sge_ary[ch_no].count -= read_wr.num_sge;
- ch_sge_ary[ch_no].start += read_wr.num_sge;
+ if (read_wr.num_sge < chl_map->ch[ch_no].count) {
+ chl_map->ch[ch_no].count -= read_wr.num_sge;
+ chl_map->ch[ch_no].start += read_wr.num_sge;
goto next_sge;
}
sgl_offset = 0;
- err = 0;
+ err = 1;
}
out:
- svc_rdma_put_context(tmp_sge_ctxt, 0);
- svc_rdma_put_context(tmp_ch_ctxt, 0);
+ svc_rdma_put_req_map(rpl_map);
+ svc_rdma_put_req_map(chl_map);
/* Detach arg pages. svc_recv will replenish them */
for (ch_no = 0; &rqstp->rq_pages[ch_no] < rqstp->rq_respages; ch_no++)
while (rqstp->rq_resused)
rqstp->rq_respages[--rqstp->rq_resused] = NULL;
- if (err) {
- printk(KERN_ERR "svcrdma : RDMA_READ error = %d\n", err);
- set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
- /* Free the linked list of read contexts */
- while (head != NULL) {
- ctxt = head->next;
- svc_rdma_put_context(head, 1);
- head = ctxt;
- }
- return 0;
- }
-
- return 1;
+ return err;
}
static int rdma_read_complete(struct svc_rqst *rqstp,
- struct svc_rdma_op_ctxt *data)
+ struct svc_rdma_op_ctxt *head)
{
- struct svc_rdma_op_ctxt *head = data->next;
int page_no;
int ret;
rqstp->rq_pages[page_no] = head->pages[page_no];
}
/* Point rq_arg.pages past header */
- rqstp->rq_arg.pages = &rqstp->rq_pages[head->sge[0].length];
+ rqstp->rq_arg.pages = &rqstp->rq_pages[head->hdr_count];
rqstp->rq_arg.page_len = head->arg.page_len;
rqstp->rq_arg.page_base = head->arg.page_base;
rqstp->rq_arg.len = head->arg.len;
rqstp->rq_arg.buflen = head->arg.buflen;
+ /* Free the context */
+ svc_rdma_put_context(head, 0);
+
/* XXX: What should this be? */
rqstp->rq_prot = IPPROTO_MAX;
-
- /*
- * Free the contexts we used to build the RDMA_READ. We have
- * to be careful here because the context list uses the same
- * next pointer used to chain the contexts associated with the
- * RDMA_READ
- */
- data->next = NULL; /* terminate circular list */
- do {
- data = head->next;
- svc_rdma_put_context(head, 0);
- head = data;
- } while (head != NULL);
+ svc_xprt_copy_addrs(rqstp, rqstp->rq_xprt);
ret = rqstp->rq_arg.head[0].iov_len
+ rqstp->rq_arg.page_len
ret, rqstp->rq_arg.len, rqstp->rq_arg.head[0].iov_base,
rqstp->rq_arg.head[0].iov_len);
- /* Indicate that we've consumed an RQ credit */
- rqstp->rq_xprt_ctxt = rqstp->rq_xprt;
svc_xprt_received(rqstp->rq_xprt);
return ret;
}
dprintk("svcrdma: rqstp=%p\n", rqstp);
- /*
- * The rq_xprt_ctxt indicates if we've consumed an RQ credit
- * or not. It is used in the rdma xpo_release_rqst function to
- * determine whether or not to return an RQ WQE to the RQ.
- */
- rqstp->rq_xprt_ctxt = NULL;
-
spin_lock_bh(&rdma_xprt->sc_read_complete_lock);
if (!list_empty(&rdma_xprt->sc_read_complete_q)) {
ctxt = list_entry(rdma_xprt->sc_read_complete_q.next,
/* If the request is invalid, reply with an error */
if (len < 0) {
if (len == -ENOSYS)
- (void)svc_rdma_send_error(rdma_xprt, rmsgp, ERR_VERS);
+ svc_rdma_send_error(rdma_xprt, rmsgp, ERR_VERS);
goto close_out;
}
- /* Read read-list data. If we would need to wait, defer
- * it. Not that in this case, we don't return the RQ credit
- * until after the read completes.
- */
- if (rdma_read_xdr(rdma_xprt, rmsgp, rqstp, ctxt)) {
+ /* Read read-list data. */
+ ret = rdma_read_xdr(rdma_xprt, rmsgp, rqstp, ctxt);
+ if (ret > 0) {
+ /* read-list posted, defer until data received from client. */
svc_xprt_received(xprt);
return 0;
}
-
- /* Indicate we've consumed an RQ credit */
- rqstp->rq_xprt_ctxt = rqstp->rq_xprt;
+ if (ret < 0) {
+ /* Post of read-list failed, free context. */
+ svc_rdma_put_context(ctxt, 1);
+ return 0;
+ }
ret = rqstp->rq_arg.head[0].iov_len
+ rqstp->rq_arg.page_len
return ret;
close_out:
- if (ctxt) {
+ if (ctxt)
svc_rdma_put_context(ctxt, 1);
- /* Indicate we've consumed an RQ credit */
- rqstp->rq_xprt_ctxt = rqstp->rq_xprt;
- }
dprintk("svcrdma: transport %p is closing\n", xprt);
/*
* Set the close bit and enqueue it. svc_recv will see the
projects / linux-2.6 / blobdiff