/* misc utils */
-static inline void ieee80211_include_sequence(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_hdr *hdr)
-{
- /* Set the sequence number for this frame. */
- hdr->seq_ctrl = cpu_to_le16(sdata->sequence);
-
- /* Increase the sequence number. */
- sdata->sequence = (sdata->sequence + 0x10) & IEEE80211_SCTL_SEQ;
-}
-
#ifdef CONFIG_MAC80211_LOWTX_FRAME_DUMP
static void ieee80211_dump_frame(const char *ifname, const char *title,
const struct sk_buff *skb)
return TX_CONTINUE;
}
-static ieee80211_tx_result debug_noinline
-ieee80211_tx_h_sequence(struct ieee80211_tx_data *tx)
-{
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
-
- if (ieee80211_hdrlen(hdr->frame_control) >= 24)
- ieee80211_include_sequence(tx->sdata, hdr);
-
- return TX_CONTINUE;
-}
-
/* This function is called whenever the AP is about to exceed the maximum limit
* of buffered frames for power saving STAs. This situation should not really
* happen often during normal operation, so dropping the oldest buffered packet
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
struct ieee80211_if_ap *ap;
- if (sdata->dev == local->mdev ||
- sdata->vif.type != IEEE80211_IF_TYPE_AP)
+ if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
continue;
ap = &sdata->u.ap;
skb = skb_dequeue(&ap->ps_bc_buf);
rcu_read_unlock();
local->total_ps_buffered = total;
-#ifdef MAC80211_VERBOSE_PS_DEBUG
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "%s: PS buffers full - purged %d frames\n",
wiphy_name(local->hw.wiphy), purged);
#endif
* This is done either by the hardware or us.
*/
- /* not AP/IBSS or ordered frame */
- if (!tx->sdata->bss || (tx->fc & IEEE80211_FCTL_ORDER))
+ /* powersaving STAs only in AP/VLAN mode */
+ if (!tx->sdata->bss)
+ return TX_CONTINUE;
+
+ /* no buffering for ordered frames */
+ if (tx->fc & IEEE80211_FCTL_ORDER)
return TX_CONTINUE;
/* no stations in PS mode */
purge_old_ps_buffers(tx->local);
if (skb_queue_len(&tx->sdata->bss->ps_bc_buf) >=
AP_MAX_BC_BUFFER) {
-#ifdef MAC80211_VERBOSE_PS_DEBUG
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: BC TX buffer full - "
"dropping the oldest frame\n",
purge_old_ps_buffers(tx->local);
if (skb_queue_len(&sta->ps_tx_buf) >= STA_MAX_TX_BUFFER) {
struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf);
-#ifdef MAC80211_VERBOSE_PS_DEBUG
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: STA %s TX "
"buffer full - dropping oldest frame\n",
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
u16 fc = tx->fc;
- if (unlikely(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
+ if (unlikely(tx->skb->do_not_encrypt))
tx->key = NULL;
else if (tx->sta && (key = rcu_dereference(tx->sta->key)))
tx->key = key;
else if ((key = rcu_dereference(tx->sdata->default_key)))
tx->key = key;
else if (tx->sdata->drop_unencrypted &&
- !(info->flags & IEEE80211_TX_CTL_EAPOL_FRAME) &&
+ (tx->skb->protocol != cpu_to_be16(ETH_P_PAE)) &&
!(info->flags & IEEE80211_TX_CTL_INJECTED)) {
I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted);
return TX_DROP;
}
if (!tx->key || !(tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
- info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+ tx->skb->do_not_encrypt = 1;
return TX_CONTINUE;
}
return TX_CONTINUE;
}
+static ieee80211_tx_result debug_noinline
+ieee80211_tx_h_sequence(struct ieee80211_tx_data *tx)
+{
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
+ u16 *seq;
+ u8 *qc;
+ int tid;
+
+ /* only for injected frames */
+ if (unlikely(ieee80211_is_ctl(hdr->frame_control)))
+ return TX_CONTINUE;
+
+ if (ieee80211_hdrlen(hdr->frame_control) < 24)
+ return TX_CONTINUE;
+
+ if (!ieee80211_is_data_qos(hdr->frame_control)) {
+ info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
+ return TX_CONTINUE;
+ }
+
+ /*
+ * This should be true for injected/management frames only, for
+ * management frames we have set the IEEE80211_TX_CTL_ASSIGN_SEQ
+ * above since they are not QoS-data frames.
+ */
+ if (!tx->sta)
+ return TX_CONTINUE;
+
+ /* include per-STA, per-TID sequence counter */
+
+ qc = ieee80211_get_qos_ctl(hdr);
+ tid = *qc & IEEE80211_QOS_CTL_TID_MASK;
+ seq = &tx->sta->tid_seq[tid];
+
+ hdr->seq_ctrl = cpu_to_le16(*seq);
+
+ /* Increase the sequence number. */
+ *seq = (*seq + 0x10) & IEEE80211_SCTL_SEQ;
+
+ return TX_CONTINUE;
+}
+
static ieee80211_tx_result debug_noinline
ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx)
{
memcpy(skb_put(frag, copylen), pos, copylen);
memcpy(frag->cb, first->cb, sizeof(frag->cb));
skb_copy_queue_mapping(frag, first);
+ frag->do_not_encrypt = first->do_not_encrypt;
pos += copylen;
left -= copylen;
sband = tx->local->hw.wiphy->bands[tx->channel->band];
- info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+ skb->do_not_encrypt = 1;
info->flags |= IEEE80211_TX_CTL_INJECTED;
tx->flags &= ~IEEE80211_TX_FRAGMENTED;
skb_trim(skb, skb->len - FCS_LEN);
}
if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP)
- info->flags &=
- ~IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+ tx->skb->do_not_encrypt = 0;
if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG)
tx->flags |= IEEE80211_TX_FRAGMENTED;
break;
struct sk_buff *skb,
struct net_device *mdev)
{
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct net_device *dev;
- dev = dev_get_by_index(&init_net, info->control.ifindex);
+ dev = dev_get_by_index(&init_net, skb->iif);
if (unlikely(dev && !is_ieee80211_device(dev, mdev))) {
dev_put(dev);
dev = NULL;
goto txh_done;
CALL_TXH(ieee80211_tx_h_check_assoc)
- CALL_TXH(ieee80211_tx_h_sequence)
CALL_TXH(ieee80211_tx_h_ps_buf)
CALL_TXH(ieee80211_tx_h_select_key)
CALL_TXH(ieee80211_tx_h_michael_mic_add)
CALL_TXH(ieee80211_tx_h_rate_ctrl)
CALL_TXH(ieee80211_tx_h_misc)
+ CALL_TXH(ieee80211_tx_h_sequence)
CALL_TXH(ieee80211_tx_h_fragment)
/* handlers after fragment must be aware of tx info fragmentation! */
CALL_TXH(ieee80211_tx_h_encrypt)
bool may_encrypt;
int ret;
- if (info->control.ifindex)
- odev = dev_get_by_index(&init_net, info->control.ifindex);
+ if (skb->iif)
+ odev = dev_get_by_index(&init_net, skb->iif);
if (unlikely(odev && !is_ieee80211_device(odev, dev))) {
dev_put(odev);
odev = NULL;
return 0;
}
+ memset(info, 0, sizeof(*info));
+
+ info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+
osdata = IEEE80211_DEV_TO_SUB_IF(odev);
- may_encrypt = !(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT);
+ may_encrypt = !skb->do_not_encrypt;
headroom = osdata->local->tx_headroom;
if (may_encrypt)
struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_radiotap_header *prthdr =
(struct ieee80211_radiotap_header *)skb->data;
u16 len_rthdr;
skb->dev = local->mdev;
/* needed because we set skb device to master */
- info->control.ifindex = dev->ifindex;
+ skb->iif = dev->ifindex;
- info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
- /* Interfaces should always request a status report */
- info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+ /* sometimes we do encrypt injected frames, will be fixed
+ * up in radiotap parser if not wanted */
+ skb->do_not_encrypt = 0;
/*
* fix up the pointers accounting for the radiotap
struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_tx_info *info;
struct ieee80211_sub_if_data *sdata;
int ret = 1, head_need;
u16 ethertype, hdrlen, meshhdrlen = 0;
nh_pos += hdrlen;
h_pos += hdrlen;
- info = IEEE80211_SKB_CB(skb);
- memset(info, 0, sizeof(*info));
- info->control.ifindex = dev->ifindex;
- if (ethertype == ETH_P_PAE)
- info->flags |= IEEE80211_TX_CTL_EAPOL_FRAME;
-
- /* Interfaces should always request a status report */
- info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+ skb->iif = dev->ifindex;
skb->dev = local->mdev;
dev->stats.tx_packets++;
struct ieee80211_vif *vif)
{
struct ieee80211_local *local = hw_to_local(hw);
- struct sk_buff *skb;
+ struct sk_buff *skb = NULL;
struct ieee80211_tx_info *info;
struct net_device *bdev;
struct ieee80211_sub_if_data *sdata = NULL;
struct ieee80211_if_ap *ap = NULL;
+ struct ieee80211_if_sta *ifsta = NULL;
struct rate_selection rsel;
struct beacon_data *beacon;
struct ieee80211_supported_band *sband;
struct ieee80211_mgmt *mgmt;
int *num_beacons;
- bool err = true;
enum ieee80211_band band = local->hw.conf.channel->band;
u8 *pos;
memcpy(skb_put(skb, beacon->head_len), beacon->head,
beacon->head_len);
- ieee80211_include_sequence(sdata,
- (struct ieee80211_hdr *)skb->data);
-
/*
* Not very nice, but we want to allow the driver to call
* ieee80211_beacon_get() as a response to the set_tim()
beacon->tail, beacon->tail_len);
num_beacons = &ap->num_beacons;
+ } else
+ goto out;
+ } else if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
+ struct ieee80211_hdr *hdr;
+ ifsta = &sdata->u.sta;
- err = false;
- }
+ if (!ifsta->probe_resp)
+ goto out;
+
+ skb = skb_copy(ifsta->probe_resp, GFP_ATOMIC);
+ if (!skb)
+ goto out;
+
+ hdr = (struct ieee80211_hdr *) skb->data;
+ hdr->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
+ IEEE80211_STYPE_BEACON);
+
+ num_beacons = &ifsta->num_beacons;
} else if (ieee80211_vif_is_mesh(&sdata->vif)) {
/* headroom, head length, tail length and maximum TIM length */
skb = dev_alloc_skb(local->tx_headroom + 400);
mesh_mgmt_ies_add(skb, sdata->dev);
num_beacons = &sdata->u.sta.num_beacons;
-
- err = false;
- }
-
- if (err) {
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- if (net_ratelimit())
- printk(KERN_DEBUG "no beacon data avail for %s\n",
- bdev->name);
-#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
- skb = NULL;
+ } else {
+ WARN_ON(1);
goto out;
}
info = IEEE80211_SKB_CB(skb);
+ skb->do_not_encrypt = 1;
+
info->band = band;
rate_control_get_rate(local->mdev, sband, skb, &rsel);
"no rate found\n",
wiphy_name(local->hw.wiphy));
}
- dev_kfree_skb(skb);
+ dev_kfree_skb_any(skb);
skb = NULL;
goto out;
}
info->control.vif = vif;
info->tx_rate_idx = rsel.rate_idx;
+
+ info->flags |= IEEE80211_TX_CTL_NO_ACK;
+ info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
+ info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
if (sdata->bss_conf.use_short_preamble &&
sband->bitrates[rsel.rate_idx].flags & IEEE80211_RATE_SHORT_PREAMBLE)
info->flags |= IEEE80211_TX_CTL_SHORT_PREAMBLE;
+
info->antenna_sel_tx = local->hw.conf.antenna_sel_tx;
- info->flags |= IEEE80211_TX_CTL_NO_ACK;
- info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
info->control.retry_limit = 1;
- info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
+
(*num_beacons)++;
out:
rcu_read_unlock();
projects / linux-2.6 / blobdiff