/*
- * Linux NET3: GRE over IP protocol decoder.
+ * Linux NET3: GRE over IP protocol decoder.
*
* Authors: Alexey Kuznetsov (kuznet@ms2.inr.ac.ru)
*
#include <linux/capability.h>
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/sched.h>
#include <linux/kernel.h>
#include <asm/uaccess.h>
#include <linux/skbuff.h>
solution, but it supposes maintaing new variable in ALL
skb, even if no tunneling is used.
- Current solution: t->recursion lock breaks dead loops. It looks
+ Current solution: t->recursion lock breaks dead loops. It looks
like dev->tbusy flag, but I preferred new variable, because
the semantics is different. One day, when hard_start_xmit
will be multithreaded we will have to use skb->encapsulation.
dst_release(skb2->dst);
skb2->dst = NULL;
skb_pull(skb2, skb->data - (u8*)eiph);
- skb2->nh.raw = skb2->data;
+ skb_reset_network_header(skb2);
/* Try to guess incoming interface */
memset(&fl, 0, sizeof(fl));
{
if (INET_ECN_is_ce(iph->tos)) {
if (skb->protocol == htons(ETH_P_IP)) {
- IP_ECN_set_ce(skb->nh.iph);
+ IP_ECN_set_ce(ip_hdr(skb));
} else if (skb->protocol == htons(ETH_P_IPV6)) {
- IP6_ECN_set_ce(skb->nh.ipv6h);
+ IP6_ECN_set_ce(ipv6_hdr(skb));
}
}
}
if (!pskb_may_pull(skb, 16))
goto drop_nolock;
- iph = skb->nh.iph;
+ iph = ip_hdr(skb);
h = skb->data;
flags = *(__be16*)h;
if (flags == 0 &&
skb->protocol == htons(ETH_P_WCCP)) {
skb->protocol = htons(ETH_P_IP);
- if ((*(h + offset) & 0xF0) != 0x40)
+ if ((*(h + offset) & 0xF0) != 0x40)
offset += 4;
}
- skb->mac.raw = skb->nh.raw;
- skb->nh.raw = __pskb_pull(skb, offset);
+ skb_reset_mac_header(skb);
+ __pskb_pull(skb, offset);
+ skb_reset_network_header(skb);
skb_postpull_rcsum(skb, skb->h.raw, offset);
skb->pkt_type = PACKET_HOST;
#ifdef CONFIG_NET_IPGRE_BROADCAST
{
struct ip_tunnel *tunnel = netdev_priv(dev);
struct net_device_stats *stats = &tunnel->stat;
- struct iphdr *old_iph = skb->nh.iph;
+ struct iphdr *old_iph = ip_hdr(skb);
struct iphdr *tiph;
u8 tos;
__be16 df;
addr_type = ipv6_addr_type(addr6);
if (addr_type == IPV6_ADDR_ANY) {
- addr6 = &skb->nh.ipv6h->daddr;
+ addr6 = &ipv6_hdr(skb)->daddr;
addr_type = ipv6_addr_type(addr6);
}
struct sk_buff *new_skb = skb_realloc_headroom(skb, max_headroom);
if (!new_skb) {
ip_rt_put(rt);
- stats->tx_dropped++;
+ stats->tx_dropped++;
dev_kfree_skb(skb);
tunnel->recursion--;
return 0;
skb_set_owner_w(new_skb, skb->sk);
dev_kfree_skb(skb);
skb = new_skb;
- old_iph = skb->nh.iph;
+ old_iph = ip_hdr(skb);
}
skb->h.raw = skb->nh.raw;
- skb->nh.raw = skb_push(skb, gre_hlen);
+ skb_push(skb, gre_hlen);
+ skb_reset_network_header(skb);
memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
IPCB(skb)->flags &= ~(IPSKB_XFRM_TUNNEL_SIZE | IPSKB_XFRM_TRANSFORMED |
IPSKB_REROUTED);
* Push down and install the IPIP header.
*/
- iph = skb->nh.iph;
+ iph = ip_hdr(skb);
iph->version = 4;
iph->ihl = sizeof(struct iphdr) >> 2;
iph->frag_off = df;
goto done;
dev = t->dev;
}
- err = unregister_netdevice(dev);
+ unregister_netdevice(dev);
+ err = 0;
break;
default:
so that I had to set ARPHRD_IPGRE to a random value.
I have an impression, that Cisco could make something similar,
but this feature is apparently missing in IOS<=11.2(8).
-
+
I set up 10.66.66/24 and fec0:6666:6666::0/96 as virtual networks
with broadcast 224.66.66.66. If you have access to mbone, play with me :-)
p[1] = htons(type);
/*
- * Set the source hardware address.
+ * Set the source hardware address.
*/
-
+
if (saddr)
memcpy(&iph->saddr, saddr, 4);
}
if (iph->daddr && !MULTICAST(iph->daddr))
return t->hlen;
-
+
return -t->hlen;
}