* signal handler may change by the time it is
* unblocked.
*/
- if (sigismember(&t->blocked, sig))
+ if (sigismember(&t->blocked, sig) || sigismember(&t->real_blocked, sig))
return 0;
/* Is it explicitly or implicitly ignored? */
void recalc_sigpending(void)
{
- if (!recalc_sigpending_tsk(current))
+ if (!recalc_sigpending_tsk(current) && !freezing(current))
clear_thread_flag(TIF_SIGPENDING);
}
int unhandled_signal(struct task_struct *tsk, int sig)
{
- if (is_init(tsk))
+ if (is_global_init(tsk))
return 1;
if (tsk->ptrace & PT_PTRACED)
return 0;
set_tsk_thread_flag(t, TIF_SIGPENDING);
/*
- * For SIGKILL, we want to wake it up in the stopped/traced case.
- * We don't check t->state here because there is a race with it
+ * For SIGKILL, we want to wake it up in the stopped/traced/killable
+ * case. We don't check t->state here because there is a race with it
* executing another processor and just now entering stopped state.
* By using wake_up_state, we ensure the process will wake up and
* handle its death signal.
*/
mask = TASK_INTERRUPTIBLE;
if (resume)
- mask |= TASK_STOPPED | TASK_TRACED;
+ mask |= TASK_WAKEKILL;
if (!wake_up_state(t, mask))
kick_process(t);
}
return error;
error = -EPERM;
if (((sig != SIGCONT) ||
- (process_session(current) != process_session(t)))
+ (task_session_nr(current) != task_session_nr(t)))
&& (current->euid ^ t->suid) && (current->euid ^ t->uid)
&& (current->uid ^ t->suid) && (current->uid ^ t->uid)
&& !capable(CAP_KILL))
* Wake up the stopped thread _after_ setting
* TIF_SIGPENDING
*/
- state = TASK_STOPPED;
+ state = __TASK_STOPPED;
if (sig_user_defined(t, SIGCONT) && !sigismember(&t->blocked, SIGCONT)) {
set_tsk_thread_flag(t, TIF_SIGPENDING);
state |= TASK_INTERRUPTIBLE;
q->info.si_signo = sig;
q->info.si_errno = 0;
q->info.si_code = SI_USER;
- q->info.si_pid = current->pid;
+ q->info.si_pid = task_pid_vnr(current);
q->info.si_uid = current->uid;
break;
case (unsigned long) SEND_SIG_PRIV:
static void print_fatal_signal(struct pt_regs *regs, int signr)
{
printk("%s/%d: potentially unexpected fatal signal %d.\n",
- current->comm, current->pid, signr);
+ current->comm, task_pid_nr(current), signr);
-#ifdef __i386__
- printk("code at %08lx: ", regs->eip);
+#if defined(__i386__) && !defined(__arch_um__)
+ printk("code at %08lx: ", regs->ip);
{
int i;
for (i = 0; i < 16; i++) {
unsigned char insn;
- __get_user(insn, (unsigned char *)(regs->eip + i));
+ __get_user(insn, (unsigned char *)(regs->ip + i));
printk("%02x ", insn);
}
}
return 0;
if (sig == SIGKILL)
return 1;
- if (p->state & (TASK_STOPPED | TASK_TRACED))
+ if (task_is_stopped_or_traced(p))
return 0;
return task_curr(p) || !signal_pending(p);
}
} while_each_thread(p, t);
return;
}
-
- /*
- * There will be a core dump. We make all threads other
- * than the chosen one go into a group stop so that nothing
- * happens until it gets scheduled, takes the signal off
- * the shared queue, and does the core dump. This is a
- * little more complicated than strictly necessary, but it
- * keeps the signal state that winds up in the core dump
- * unchanged from the death state, e.g. which thread had
- * the core-dump signal unblocked.
- */
- rm_from_queue(SIG_KERNEL_STOP_MASK, &t->pending);
- rm_from_queue(SIG_KERNEL_STOP_MASK, &p->signal->shared_pending);
- p->signal->group_stop_count = 0;
- p->signal->group_exit_task = t;
- p = t;
- do {
- p->signal->group_stop_count++;
- signal_wake_up(t, t == p);
- } while_each_thread(p, t);
- return;
}
/*
{
struct task_struct *t;
- p->signal->flags = SIGNAL_GROUP_EXIT;
p->signal->group_stop_count = 0;
for (t = next_thread(p); t != p; t = next_thread(t)) {
}
}
+int fastcall __fatal_signal_pending(struct task_struct *tsk)
+{
+ return sigismember(&tsk->pending.signal, SIGKILL);
+}
+EXPORT_SYMBOL(__fatal_signal_pending);
+
/*
* Must be called under rcu_read_lock() or with tasklist_lock read-held.
*/
{
int error;
rcu_read_lock();
- error = kill_pid_info(sig, info, find_pid(pid));
+ error = kill_pid_info(sig, info, find_vpid(pid));
rcu_read_unlock();
return error;
}
read_lock(&tasklist_lock);
for_each_process(p) {
- if (p->pid > 1 && p->tgid != current->tgid) {
+ if (p->pid > 1 && !same_thread_group(p, current)) {
int err = group_send_sig_info(sig, info, p);
++count;
if (err != -EPERM)
read_unlock(&tasklist_lock);
ret = count ? retval : -ESRCH;
} else if (pid < 0) {
- ret = kill_pgrp_info(sig, info, find_pid(-pid));
+ ret = kill_pgrp_info(sig, info, find_vpid(-pid));
} else {
- ret = kill_pid_info(sig, info, find_pid(pid));
+ ret = kill_pid_info(sig, info, find_vpid(pid));
}
rcu_read_unlock();
return ret;
int
kill_proc(pid_t pid, int sig, int priv)
{
- return kill_proc_info(sig, __si_special(priv), pid);
+ int ret;
+
+ rcu_read_lock();
+ ret = kill_pid_info(sig, __si_special(priv), find_pid(pid));
+ rcu_read_unlock();
+ return ret;
}
/*
BUG_ON(sig == -1);
/* do_notify_parent_cldstop should have been called instead. */
- BUG_ON(tsk->state & (TASK_STOPPED|TASK_TRACED));
+ BUG_ON(task_is_stopped_or_traced(tsk));
BUG_ON(!tsk->ptrace &&
(tsk->group_leader != tsk || !thread_group_empty(tsk)));
info.si_signo = sig;
info.si_errno = 0;
- info.si_pid = tsk->pid;
+ /*
+ * we are under tasklist_lock here so our parent is tied to
+ * us and cannot exit and release its namespace.
+ *
+ * the only it can is to switch its nsproxy with sys_unshare,
+ * bu uncharing pid namespaces is not allowed, so we'll always
+ * see relevant namespace
+ *
+ * write_lock() currently calls preempt_disable() which is the
+ * same as rcu_read_lock(), but according to Oleg, this is not
+ * correct to rely on this
+ */
+ rcu_read_lock();
+ info.si_pid = task_pid_nr_ns(tsk, tsk->parent->nsproxy->pid_ns);
+ rcu_read_unlock();
+
info.si_uid = tsk->uid;
/* FIXME: find out whether or not this is supposed to be c*time. */
info.si_signo = SIGCHLD;
info.si_errno = 0;
- info.si_pid = tsk->pid;
+ /*
+ * see comment in do_notify_parent() abot the following 3 lines
+ */
+ rcu_read_lock();
+ info.si_pid = task_pid_nr_ns(tsk, tsk->parent->nsproxy->pid_ns);
+ rcu_read_unlock();
+
info.si_uid = tsk->uid;
/* FIXME: find out whether or not this is supposed to be c*time. */
return 1;
}
+/*
+ * Return nonzero if there is a SIGKILL that should be waking us up.
+ * Called with the siglock held.
+ */
+static int sigkill_pending(struct task_struct *tsk)
+{
+ return ((sigismember(&tsk->pending.signal, SIGKILL) ||
+ sigismember(&tsk->signal->shared_pending.signal, SIGKILL)) &&
+ !unlikely(sigismember(&tsk->blocked, SIGKILL)));
+}
+
/*
* This must be called with current->sighand->siglock held.
*
*/
static void ptrace_stop(int exit_code, int nostop_code, siginfo_t *info)
{
+ int killed = 0;
+
+ if (arch_ptrace_stop_needed(exit_code, info)) {
+ /*
+ * The arch code has something special to do before a
+ * ptrace stop. This is allowed to block, e.g. for faults
+ * on user stack pages. We can't keep the siglock while
+ * calling arch_ptrace_stop, so we must release it now.
+ * To preserve proper semantics, we must do this before
+ * any signal bookkeeping like checking group_stop_count.
+ * Meanwhile, a SIGKILL could come in before we retake the
+ * siglock. That must prevent us from sleeping in TASK_TRACED.
+ * So after regaining the lock, we must check for SIGKILL.
+ */
+ spin_unlock_irq(¤t->sighand->siglock);
+ arch_ptrace_stop(exit_code, info);
+ spin_lock_irq(¤t->sighand->siglock);
+ killed = sigkill_pending(current);
+ }
+
/*
* If there is a group stop in progress,
* we must participate in the bookkeeping.
current->exit_code = exit_code;
/* Let the debugger run. */
- set_current_state(TASK_TRACED);
+ __set_current_state(TASK_TRACED);
spin_unlock_irq(¤t->sighand->siglock);
try_to_freeze();
read_lock(&tasklist_lock);
- if (may_ptrace_stop()) {
+ if (!unlikely(killed) && may_ptrace_stop()) {
do_notify_parent_cldstop(current, CLD_TRAPPED);
read_unlock(&tasklist_lock);
schedule();
memset(&info, 0, sizeof info);
info.si_signo = SIGTRAP;
info.si_code = exit_code;
- info.si_pid = current->pid;
+ info.si_pid = task_pid_vnr(current);
info.si_uid = current->uid;
/* Let the debugger run. */
struct signal_struct *sig = current->signal;
int stop_count;
- if (!likely(sig->flags & SIGNAL_STOP_DEQUEUED))
- return 0;
-
if (sig->group_stop_count > 0) {
/*
* There is a group stop in progress. We don't need to
*/
stop_count = --sig->group_stop_count;
} else {
+ struct task_struct *t;
+
+ if (!likely(sig->flags & SIGNAL_STOP_DEQUEUED) ||
+ unlikely(sig->group_exit_task))
+ return 0;
/*
* There is no group stop already in progress.
* We must initiate one now.
*/
- struct task_struct *t;
-
sig->group_exit_code = signr;
stop_count = 0;
* so this check has no races.
*/
if (!t->exit_state &&
- !(t->state & (TASK_STOPPED|TASK_TRACED))) {
+ !task_is_stopped_or_traced(t)) {
stop_count++;
signal_wake_up(t, 0);
}
return 1;
}
-/*
- * Do appropriate magic when group_stop_count > 0.
- * We return nonzero if we stopped, after releasing the siglock.
- * We return zero if we still hold the siglock and should look
- * for another signal without checking group_stop_count again.
- */
-static int handle_group_stop(void)
-{
- int stop_count;
-
- if (current->signal->group_exit_task == current) {
- /*
- * Group stop is so we can do a core dump,
- * We are the initiating thread, so get on with it.
- */
- current->signal->group_exit_task = NULL;
- return 0;
- }
-
- if (current->signal->flags & SIGNAL_GROUP_EXIT)
- /*
- * Group stop is so another thread can do a core dump,
- * or else we are racing against a death signal.
- * Just punt the stop so we can get the next signal.
- */
- return 0;
-
- /*
- * There is a group stop in progress. We stop
- * without any associated signal being in our queue.
- */
- stop_count = --current->signal->group_stop_count;
- if (stop_count == 0)
- current->signal->flags = SIGNAL_STOP_STOPPED;
- current->exit_code = current->signal->group_exit_code;
- set_current_state(TASK_STOPPED);
- spin_unlock_irq(¤t->sighand->siglock);
- finish_stop(stop_count);
- return 1;
-}
-
int get_signal_to_deliver(siginfo_t *info, struct k_sigaction *return_ka,
struct pt_regs *regs, void *cookie)
{
struct k_sigaction *ka;
if (unlikely(current->signal->group_stop_count > 0) &&
- handle_group_stop())
+ do_signal_stop(0))
goto relock;
signr = dequeue_signal(current, mask, info);
info->si_signo = signr;
info->si_errno = 0;
info->si_code = SI_USER;
- info->si_pid = current->parent->pid;
+ info->si_pid = task_pid_vnr(current->parent);
info->si_uid = current->parent->uid;
}
continue;
/*
- * Init of a pid space gets no signals it doesn't want from
- * within that pid space. It can of course get signals from
- * its parent pid space.
+ * Global init gets no signals it doesn't want.
*/
- if (current == child_reaper(current))
+ if (is_global_init(current))
continue;
if (sig_kernel_stop(signr)) {
info.si_signo = sig;
info.si_errno = 0;
info.si_code = SI_USER;
- info.si_pid = current->tgid;
+ info.si_pid = task_tgid_vnr(current);
info.si_uid = current->uid;
return kill_something_info(sig, &info, pid);
info.si_signo = sig;
info.si_errno = 0;
info.si_code = SI_TKILL;
- info.si_pid = current->tgid;
+ info.si_pid = task_tgid_vnr(current);
info.si_uid = current->uid;
read_lock(&tasklist_lock);
- p = find_task_by_pid(pid);
- if (p && (tgid <= 0 || p->tgid == tgid)) {
+ p = find_task_by_vpid(pid);
+ if (p && (tgid <= 0 || task_tgid_vnr(p) == tgid)) {
error = check_kill_permission(sig, &info, p);
/*
* The null signal is a permissions and process existence