#ifdef __KERNEL__
-#include <linux/config.h>
#include <linux/errno.h> /* for -ENODEV */
#include <linux/delay.h> /* for mdelay() */
#include <linux/interrupt.h> /* for in_interrupt() */
* Devices may also have class-specific or vendor-specific descriptors.
*/
+struct ep_device;
+
/**
* struct usb_host_endpoint - host-side endpoint descriptor and queue
* @desc: descriptor for this endpoint, wMaxPacketSize in native byteorder
struct usb_endpoint_descriptor desc;
struct list_head urb_list;
void *hcpriv;
- struct kobject *kobj; /* For sysfs info */
+ struct ep_device *ep_dev; /* For sysfs info */
unsigned char *extra; /* Extra descriptors */
int extralen;
* @condition: binding state of the interface: not bound, binding
* (in probe()), bound to a driver, or unbinding (in disconnect())
* @dev: driver model's view of this device
- * @class_dev: driver model's class view of this device.
+ * @usb_dev: if an interface is bound to the USB major, this will point
+ * to the sysfs representation for that device.
*
* USB device drivers attach to interfaces on a physical device. Each
* interface encapsulates a single high level function, such as feeding
* bound to */
enum usb_interface_condition condition; /* state of binding */
struct device dev; /* interface specific device info */
- struct class_device *class_dev;
+ struct device *usb_dev; /* pointer to the usb class's device, if any */
};
#define to_usb_interface(d) container_of(d, struct usb_interface, dev)
#define interface_to_usbdev(intf) \
struct usb_tt *tt; /* low/full speed dev, highspeed hub */
int ttport; /* device port on that tt hub */
- struct semaphore serialize;
-
unsigned int toggle[2]; /* one bit for each endpoint
* ([0] = IN, [1] = OUT) */
char **rawdescriptors; /* Raw descriptors for each config */
+ unsigned short bus_mA; /* Current available from the bus */
+ u8 portnum; /* Parent port number (origin 1) */
+
int have_langid; /* whether string_langid is valid */
int string_langid; /* language ID for strings */
char *serial; /* iSerialNumber string, if present */
struct list_head filelist;
- struct class_device *class_dev;
+ struct device *usbfs_dev;
struct dentry *usbfs_dentry; /* usbfs dentry entry for the device */
/*
extern struct usb_device *usb_get_dev(struct usb_device *dev);
extern void usb_put_dev(struct usb_device *dev);
-extern void usb_lock_device(struct usb_device *udev);
-extern int usb_trylock_device(struct usb_device *udev);
+/* USB device locking */
+#define usb_lock_device(udev) down(&(udev)->dev.sem)
+#define usb_unlock_device(udev) up(&(udev)->dev.sem)
+#define usb_trylock_device(udev) down_trylock(&(udev)->dev.sem)
extern int usb_lock_device_for_reset(struct usb_device *udev,
struct usb_interface *iface);
-extern void usb_unlock_device(struct usb_device *udev);
/* USB port reset for device reinitialization */
extern int usb_reset_device(struct usb_device *dev);
+extern int usb_reset_composite_device(struct usb_device *dev,
+ struct usb_interface *iface);
extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);
/* ----------------------------------------------------------------------- */
+struct usb_dynids {
+ spinlock_t lock;
+ struct list_head list;
+};
+
/**
* struct usb_driver - identifies USB driver to usbcore
- * @owner: Pointer to the module owner of this driver; initialize
- * it using THIS_MODULE.
* @name: The driver name should be unique among USB drivers,
* and should normally be the same as the module name.
* @probe: Called to see if the driver is willing to manage a particular
* do (or don't) show up otherwise in the filesystem.
* @suspend: Called when the device is going to be suspended by the system.
* @resume: Called when the device is being resumed by the system.
+ * @pre_reset: Called by usb_reset_composite_device() when the device
+ * is about to be reset.
+ * @post_reset: Called by usb_reset_composite_device() after the device
+ * has been reset.
* @id_table: USB drivers use ID table to support hotplugging.
* Export this with MODULE_DEVICE_TABLE(usb,...). This must be set
* or your driver's probe function will never get called.
+ * @dynids: used internally to hold the list of dynamically added device
+ * ids for this driver.
* @driver: the driver model core driver structure.
+ * @no_dynamic_id: if set to 1, the USB core will not allow dynamic ids to be
+ * added to this driver by preventing the sysfs file from being created.
*
* USB drivers must provide a name, probe() and disconnect() methods,
* and an id_table. Other driver fields are optional.
* them as necessary, and blocking until the unlinks complete).
*/
struct usb_driver {
- struct module *owner;
-
const char *name;
int (*probe) (struct usb_interface *intf,
int (*suspend) (struct usb_interface *intf, pm_message_t message);
int (*resume) (struct usb_interface *intf);
+ void (*pre_reset) (struct usb_interface *intf);
+ void (*post_reset) (struct usb_interface *intf);
+
const struct usb_device_id *id_table;
+ struct usb_dynids dynids;
struct device_driver driver;
+ unsigned int no_dynamic_id:1;
};
#define to_usb_driver(d) container_of(d, struct usb_driver, driver)
*/
struct usb_class_driver {
char *name;
- struct file_operations *fops;
+ const struct file_operations *fops;
int minor_base;
};
* use these in module_init()/module_exit()
* and don't forget MODULE_DEVICE_TABLE(usb, ...)
*/
-extern int usb_register(struct usb_driver *);
+int usb_register_driver(struct usb_driver *, struct module *);
+static inline int usb_register(struct usb_driver *driver)
+{
+ return usb_register_driver(driver, THIS_MODULE);
+}
extern void usb_deregister(struct usb_driver *);
extern int usb_register_dev(struct usb_interface *intf,
extern int usb_control_msg(struct usb_device *dev, unsigned int pipe,
__u8 request, __u8 requesttype, __u16 value, __u16 index,
void *data, __u16 size, int timeout);
+extern int usb_interrupt_msg(struct usb_device *usb_dev, unsigned int pipe,
+ void *data, int len, int *actual_length, int timeout);
extern int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
void *data, int len, int *actual_length,
int timeout);
unsigned char descindex, void *buf, int size);
extern int usb_get_status(struct usb_device *dev,
int type, int target, void *data);
-extern int usb_get_string(struct usb_device *dev,
- unsigned short langid, unsigned char index, void *buf, int size);
extern int usb_string(struct usb_device *dev, int index,
char *buf, size_t size);
projects / linux-2.6 / blobdiff