/* Bits for HD_ERROR */
#define MARK_ERR 0x01 /* Bad address mark */
+#define ILI_ERR 0x01 /* Illegal Length Indication (ATAPI) */
#define TRK0_ERR 0x02 /* couldn't find track 0 */
+#define EOM_ERR 0x02 /* End Of Media (ATAPI) */
#define ABRT_ERR 0x04 /* Command aborted */
#define MCR_ERR 0x08 /* media change request */
#define ID_ERR 0x10 /* ID field not found */
#define ECC_ERR 0x40 /* Uncorrectable ECC error */
#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */
#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */
+#define LFS_ERR 0xf0 /* Last Failed Sense (ATAPI) */
/* Bits of HD_NSECTOR */
#define CD 0x01
#define HDIO_DRIVE_HOB_HDR_SIZE (8 * sizeof(__u8))
#define HDIO_DRIVE_TASK_HDR_SIZE (8 * sizeof(__u8))
-#define IDE_DRIVE_TASK_INVALID -1
#define IDE_DRIVE_TASK_NO_DATA 0
+#ifndef __KERNEL__
+#define IDE_DRIVE_TASK_INVALID -1
#define IDE_DRIVE_TASK_SET_XFER 1
-
#define IDE_DRIVE_TASK_IN 2
-
#define IDE_DRIVE_TASK_OUT 3
+#endif
#define IDE_DRIVE_TASK_RAW_WRITE 4
/*
} hob_struct_t;
#endif
-#define TASKFILE_INVALID 0x7fff
-#define TASKFILE_48 0x8000
-
#define TASKFILE_NO_DATA 0x0000
#define TASKFILE_IN 0x0001
#define TASKFILE_IN_DMAQ 0x0080
#define TASKFILE_OUT_DMAQ 0x0100
+#ifndef __KERNEL__
#define TASKFILE_P_IN 0x0200
#define TASKFILE_P_OUT 0x0400
#define TASKFILE_P_IN_DMA 0x0800
#define TASKFILE_P_OUT_DMA 0x1000
#define TASKFILE_P_IN_DMAQ 0x2000
#define TASKFILE_P_OUT_DMAQ 0x4000
+#define TASKFILE_48 0x8000
+#define TASKFILE_INVALID 0x7fff
+#endif
/* ATA/ATAPI Commands pre T13 Spec */
#define WIN_NOP 0x00
#define SETFEATURES_EN_RLA 0xAA /* Enable read look-ahead feature */
#define SETFEATURES_PREFETCH 0xAB /* Sets drive prefetch value */
#define SETFEATURES_EN_REST 0xAC /* ATA-1 */
-#define SETFEATURES_4B_RW_LONG 0xBB /* Set Lenght of 4 bytes */
+#define SETFEATURES_4B_RW_LONG 0xBB /* Set Length of 4 bytes */
#define SETFEATURES_DIS_AAM 0xC2 /* Disable Automatic Acoustic Management */
#define SETFEATURES_EN_RPOD 0xCC /* Enable reverting to power on defaults */
#define SETFEATURES_DIS_RI 0xDD /* Disable release interrupt ATAPI */
#define HDIO_SET_NOWERR 0x0325 /* change ignore-write-error flag */
#define HDIO_SET_DMA 0x0326 /* change use-dma flag */
#define HDIO_SET_PIO_MODE 0x0327 /* reconfig interface to new speed */
+#ifndef __KERNEL__
#define HDIO_SCAN_HWIF 0x0328 /* register and (re)scan interface */
-#define HDIO_SET_NICE 0x0329 /* set nice flags */
#define HDIO_UNREGISTER_HWIF 0x032a /* unregister interface */
+#endif
+#define HDIO_SET_NICE 0x0329 /* set nice flags */
#define HDIO_SET_WCACHE 0x032b /* change write cache enable-disable */
#define HDIO_SET_ACOUSTIC 0x032c /* change acoustic behavior */
#define HDIO_SET_BUSSTATE 0x032d /* set the bus state of the hwif */
*/
#define IDE_NICE_DSC_OVERLAP (0) /* per the DSC overlap protocol */
#define IDE_NICE_ATAPI_OVERLAP (1) /* not supported yet */
-#define IDE_NICE_0 (2) /* when sure that it won't affect us */
#define IDE_NICE_1 (3) /* when probably won't affect us much */
+#ifndef __KERNEL__
+#define IDE_NICE_0 (2) /* when sure that it won't affect us */
#define IDE_NICE_2 (4) /* when we know it's on our expense */
+#endif
#endif /* _LINUX_HDREG_H */