struct mm_struct;
struct vm_area_struct;
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
-extern unsigned long empty_zero_page[1024];
extern pgd_t swapper_pg_dir[1024];
extern struct kmem_cache *pmd_cache;
-extern spinlock_t pgd_lock;
-extern struct page *pgd_list;
void check_pgt_cache(void);
-void pmd_ctor(struct kmem_cache *, void *);
-void pgtable_cache_init(void);
+static inline void pgtable_cache_init(void) {}
void paging_init(void);
#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
-#define TWOLEVEL_PGDIR_SHIFT 22
-#define BOOT_USER_PGD_PTRS (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT)
-#define BOOT_KERNEL_PGD_PTRS (1024-BOOT_USER_PGD_PTRS)
-
/* Just any arbitrary offset to the start of the vmalloc VM area: the
* current 8MB value just means that there will be a 8MB "hole" after the
* physical memory until the kernel virtual memory starts. That means that
#define VMALLOC_OFFSET (8*1024*1024)
#define VMALLOC_START (((unsigned long) high_memory + \
2*VMALLOC_OFFSET-1) & ~(VMALLOC_OFFSET-1))
+#ifdef CONFIG_X86_PAE
+#define LAST_PKMAP 512
+#else
+#define LAST_PKMAP 1024
+#endif
+
+#define PKMAP_BASE ((FIXADDR_BOOT_START - PAGE_SIZE*(LAST_PKMAP + 1)) & PMD_MASK)
+
#ifdef CONFIG_HIGHMEM
# define VMALLOC_END (PKMAP_BASE-2*PAGE_SIZE)
#else
#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-static inline int pte_dirty(pte_t pte) { return (pte).pte_low & _PAGE_DIRTY; }
-static inline int pte_young(pte_t pte) { return (pte).pte_low & _PAGE_ACCESSED; }
-static inline int pte_write(pte_t pte) { return (pte).pte_low & _PAGE_RW; }
-static inline int pte_huge(pte_t pte) { return (pte).pte_low & _PAGE_PSE; }
-
-/*
- * The following only works if pte_present() is not true.
- */
-static inline int pte_file(pte_t pte) { return (pte).pte_low & _PAGE_FILE; }
-
-static inline pte_t pte_mkclean(pte_t pte) { (pte).pte_low &= ~_PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkold(pte_t pte) { (pte).pte_low &= ~_PAGE_ACCESSED; return pte; }
-static inline pte_t pte_wrprotect(pte_t pte) { (pte).pte_low &= ~_PAGE_RW; return pte; }
-static inline pte_t pte_mkdirty(pte_t pte) { (pte).pte_low |= _PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkyoung(pte_t pte) { (pte).pte_low |= _PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkwrite(pte_t pte) { (pte).pte_low |= _PAGE_RW; return pte; }
-static inline pte_t pte_mkhuge(pte_t pte) { (pte).pte_low |= _PAGE_PSE; return pte; }
-
#ifdef CONFIG_X86_PAE
# include <asm/pgtable-3level.h>
#else
# include <asm/pgtable-2level.h>
#endif
-#ifndef CONFIG_PARAVIRT
-/*
- * Rules for using pte_update - it must be called after any PTE update which
- * has not been done using the set_pte / clear_pte interfaces. It is used by
- * shadow mode hypervisors to resynchronize the shadow page tables. Kernel PTE
- * updates should either be sets, clears, or set_pte_atomic for P->P
- * transitions, which means this hook should only be called for user PTEs.
- * This hook implies a P->P protection or access change has taken place, which
- * requires a subsequent TLB flush. The notification can optionally be delayed
- * until the TLB flush event by using the pte_update_defer form of the
- * interface, but care must be taken to assure that the flush happens while
- * still holding the same page table lock so that the shadow and primary pages
- * do not become out of sync on SMP.
- */
-#define pte_update(mm, addr, ptep) do { } while (0)
-#define pte_update_defer(mm, addr, ptep) do { } while (0)
-#endif
-
-/* local pte updates need not use xchg for locking */
-static inline pte_t native_local_ptep_get_and_clear(pte_t *ptep)
-{
- pte_t res = *ptep;
-
- /* Pure native function needs no input for mm, addr */
- native_pte_clear(NULL, 0, ptep);
- return res;
-}
-
-/*
- * We only update the dirty/accessed state if we set
- * the dirty bit by hand in the kernel, since the hardware
- * will do the accessed bit for us, and we don't want to
- * race with other CPU's that might be updating the dirty
- * bit at the same time.
- */
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-#define ptep_set_access_flags(vma, address, ptep, entry, dirty) \
-({ \
- int __changed = !pte_same(*(ptep), entry); \
- if (__changed && dirty) { \
- (ptep)->pte_low = (entry).pte_low; \
- pte_update_defer((vma)->vm_mm, (address), (ptep)); \
- flush_tlb_page(vma, address); \
- } \
- __changed; \
-})
-
-#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
-#define ptep_test_and_clear_young(vma, addr, ptep) ({ \
- int __ret = 0; \
- if (pte_young(*(ptep))) \
- __ret = test_and_clear_bit(_PAGE_BIT_ACCESSED, \
- &(ptep)->pte_low); \
- if (__ret) \
- pte_update((vma)->vm_mm, addr, ptep); \
- __ret; \
-})
-
-#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
-#define ptep_clear_flush_young(vma, address, ptep) \
-({ \
- int __young; \
- __young = ptep_test_and_clear_young((vma), (address), (ptep)); \
- if (__young) \
- flush_tlb_page(vma, address); \
- __young; \
-})
-
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
- pte_t pte = native_ptep_get_and_clear(ptep);
- pte_update(mm, addr, ptep);
- return pte;
-}
-
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL
-static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm, unsigned long addr, pte_t *ptep, int full)
-{
- pte_t pte;
- if (full) {
- /*
- * Full address destruction in progress; paravirt does not
- * care about updates and native needs no locking
- */
- pte = native_local_ptep_get_and_clear(ptep);
- } else {
- pte = ptep_get_and_clear(mm, addr, ptep);
- }
- return pte;
-}
-
-#define __HAVE_ARCH_PTEP_SET_WRPROTECT
-static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
- clear_bit(_PAGE_BIT_RW, &ptep->pte_low);
- pte_update(mm, addr, ptep);
-}
-
/*
* clone_pgd_range(pgd_t *dst, pgd_t *src, int count);
*
#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
- pte.pte_low &= _PAGE_CHG_MASK;
- pte.pte_low |= pgprot_val(newprot);
-#ifdef CONFIG_X86_PAE
- /*
- * Chop off the NX bit (if present), and add the NX portion of
- * the newprot (if present):
- */
- pte.pte_high &= ~(1 << (_PAGE_BIT_NX - 32));
- pte.pte_high |= (pgprot_val(newprot) >> 32) & \
- (__supported_pte_mask >> 32);
-#endif
- return pte;
-}
-
-#define pmd_large(pmd) \
-((pmd_val(pmd) & (_PAGE_PSE|_PAGE_PRESENT)) == (_PAGE_PSE|_PAGE_PRESENT))
-
/*
* the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
*
*/
#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+static inline int pud_large(pud_t pud) { return 0; }
+
/*
* the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
*
#define pmd_page_vaddr(pmd) \
((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
-/*
- * Helper function that returns the kernel pagetable entry controlling
- * the virtual address 'address'. NULL means no pagetable entry present.
- * NOTE: the return type is pte_t but if the pmd is PSE then we return it
- * as a pte too.
- */
-extern pte_t *lookup_address(unsigned long address);
-
-/*
- * Make a given kernel text page executable/non-executable.
- * Returns the previous executability setting of that page (which
- * is used to restore the previous state). Used by the SMP bootup code.
- * NOTE: this is an __init function for security reasons.
- */
-#ifdef CONFIG_X86_PAE
- extern int set_kernel_exec(unsigned long vaddr, int enable);
-#else
- static inline int set_kernel_exec(unsigned long vaddr, int enable) { return 0;}
-#endif
-
#if defined(CONFIG_HIGHPTE)
#define pte_offset_map(dir, address) \
((pte_t *)kmap_atomic_pte(pmd_page(*(dir)),KM_PTE0) + pte_index(address))
#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
remap_pfn_range(vma, vaddr, pfn, size, prot)
-#include <asm-generic/pgtable.h>
-
#endif /* _I386_PGTABLE_H */