* is actually performed (i.e. the data has come back) before we start
* executing any following instructions.
*/
-extern inline int in_8(volatile unsigned char __iomem *addr)
+extern inline int in_8(const volatile unsigned char __iomem *addr)
{
int ret;
__asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
}
-extern inline int in_le16(volatile unsigned short __iomem *addr)
+extern inline int in_le16(const volatile unsigned short __iomem *addr)
{
int ret;
return ret;
}
-extern inline int in_be16(volatile unsigned short __iomem *addr)
+extern inline int in_be16(const volatile unsigned short __iomem *addr)
{
int ret;
__asm__ __volatile__("sth%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
}
-extern inline unsigned in_le32(volatile unsigned __iomem *addr)
+extern inline unsigned in_le32(const volatile unsigned __iomem *addr)
{
unsigned ret;
return ret;
}
-extern inline unsigned in_be32(volatile unsigned __iomem *addr)
+extern inline unsigned in_be32(const volatile unsigned __iomem *addr)
{
unsigned ret;
#define readb(addr) in_8((volatile u8 *)(addr))
#define writeb(b,addr) out_8((volatile u8 *)(addr), (b))
#else
-static inline __u8 readb(volatile void __iomem *addr)
+static inline __u8 readb(const volatile void __iomem *addr)
{
return in_8(addr);
}
#endif
#if defined(CONFIG_APUS)
-static inline __u16 readw(volatile void __iomem *addr)
+static inline __u16 readw(const volatile void __iomem *addr)
{
return *(__force volatile __u16 *)(addr);
}
-static inline __u32 readl(volatile void __iomem *addr)
+static inline __u32 readl(const volatile void __iomem *addr)
{
return *(__force volatile __u32 *)(addr);
}
#define writew(b,addr) out_le16((volatile u16 *)(addr),(b))
#define writel(b,addr) out_le32((volatile u32 *)(addr),(b))
#else
-static inline __u16 readw(volatile void __iomem *addr)
+static inline __u16 readw(const volatile void __iomem *addr)
{
return in_le16(addr);
}
-static inline __u32 readl(volatile void __iomem *addr)
+static inline __u32 readl(const volatile void __iomem *addr)
{
return in_le32(addr);
}
#define outsl(port, buf, nl) _outsl_ns((port)+___IO_BASE, (buf), (nl))
/*
- * On powermacs, we will get a machine check exception if we
- * try to read data from a non-existent I/O port. Because the
- * machine check is an asynchronous exception, it isn't
+ * On powermacs and 8xx we will get a machine check exception
+ * if we try to read data from a non-existent I/O port. Because
+ * the machine check is an asynchronous exception, it isn't
* well-defined which instruction SRR0 will point to when the
* exception occurs.
* With the sequence below (twi; isync; nop), we have found that
{ \
unsigned int x; \
__asm__ __volatile__( \
- op " %0,0,%1\n" \
+ "0:" op " %0,0,%1\n" \
"1: twi 0,%0,0\n" \
"2: isync\n" \
"3: nop\n" \
".previous\n" \
".section __ex_table,\"a\"\n" \
" .align 2\n" \
+ " .long 0b,5b\n" \
" .long 1b,5b\n" \
" .long 2b,5b\n" \
" .long 3b,5b\n" \
extern __inline__ void name(unsigned int val, unsigned int port) \
{ \
__asm__ __volatile__( \
- op " %0,0,%1\n" \
+ "0:" op " %0,0,%1\n" \
"1: sync\n" \
"2:\n" \
".section __ex_table,\"a\"\n" \
" .align 2\n" \
+ " .long 0b,2b\n" \
" .long 1b,2b\n" \
".previous" \
: : "r" (val), "r" (port + ___IO_BASE)); \
#include <asm/mpc8260_pci9.h>
#endif
+#ifdef CONFIG_NOT_COHERENT_CACHE
+
+#define dma_cache_inv(_start,_size) \
+ invalidate_dcache_range(_start, (_start + _size))
+#define dma_cache_wback(_start,_size) \
+ clean_dcache_range(_start, (_start + _size))
+#define dma_cache_wback_inv(_start,_size) \
+ flush_dcache_range(_start, (_start + _size))
+
+#else
+
+#define dma_cache_inv(_start,_size) do { } while (0)
+#define dma_cache_wback(_start,_size) do { } while (0)
+#define dma_cache_wback_inv(_start,_size) do { } while (0)
+
+#endif
+
/*
* Convert a physical pointer to a virtual kernel pointer for /dev/mem
* access