#include <linux/string.h>
struct pci_dev;
+struct pci_bus;
struct device_node;
#ifdef CONFIG_EEH
extern int eeh_subsystem_enabled;
/* Values for eeh_mode bits in device_node */
-#define EEH_MODE_SUPPORTED (1<<0)
-#define EEH_MODE_NOCHECK (1<<1)
-#define EEH_MODE_ISOLATED (1<<2)
+#define EEH_MODE_SUPPORTED (1<<0)
+#define EEH_MODE_NOCHECK (1<<1)
+#define EEH_MODE_ISOLATED (1<<2)
+#define EEH_MODE_RECOVERING (1<<3)
+#define EEH_MODE_IRQ_DISABLED (1<<4)
/* Max number of EEH freezes allowed before we consider the device
* to be permanently disabled. */
* device (including config space i/o). Call eeh_add_device_late
* to finish the eeh setup for this device.
*/
-void eeh_add_device_early(struct device_node *);
void eeh_add_device_tree_early(struct device_node *);
-void eeh_add_device_late(struct pci_dev *);
-
-/**
- * eeh_remove_device - undo EEH setup for the indicated pci device
- * @dev: pci device to be removed
- *
- * This routine should be called when a device is removed from
- * a running system (e.g. by hotplug or dlpar). It unregisters
- * the PCI device from the EEH subsystem. I/O errors affecting
- * this device will no longer be detected after this call; thus,
- * i/o errors affecting this slot may leave this device unusable.
- */
-void eeh_remove_device(struct pci_dev *);
+void eeh_add_device_tree_late(struct pci_bus *);
/**
* eeh_remove_device_recursive - undo EEH for device & children.
static inline void pci_addr_cache_build(void) { }
-static inline void eeh_add_device_early(struct device_node *dn) { }
-
-static inline void eeh_add_device_late(struct pci_dev *dev) { }
+static inline void eeh_add_device_tree_early(struct device_node *dn) { }
-static inline void eeh_remove_device(struct pci_dev *dev) { }
+static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
+static inline void eeh_remove_bus_device(struct pci_dev *dev) { }
#define EEH_POSSIBLE_ERROR(val, type) (0)
#define EEH_IO_ERROR_VALUE(size) (-1UL)
#endif /* CONFIG_EEH */
static inline u8 eeh_inb(unsigned long port)
{
u8 val;
- if (!_IO_IS_VALID(port))
- return ~0;
val = in_8((u8 __iomem *)(port+pci_io_base));
if (EEH_POSSIBLE_ERROR(val, u8))
return eeh_check_failure((void __iomem *)(port), val);
static inline void eeh_outb(u8 val, unsigned long port)
{
- if (_IO_IS_VALID(port))
- out_8((u8 __iomem *)(port+pci_io_base), val);
+ out_8((u8 __iomem *)(port+pci_io_base), val);
}
static inline u16 eeh_inw(unsigned long port)
{
u16 val;
- if (!_IO_IS_VALID(port))
- return ~0;
val = in_le16((u16 __iomem *)(port+pci_io_base));
if (EEH_POSSIBLE_ERROR(val, u16))
return eeh_check_failure((void __iomem *)(port), val);
static inline void eeh_outw(u16 val, unsigned long port)
{
- if (_IO_IS_VALID(port))
- out_le16((u16 __iomem *)(port+pci_io_base), val);
+ out_le16((u16 __iomem *)(port+pci_io_base), val);
}
static inline u32 eeh_inl(unsigned long port)
{
u32 val;
- if (!_IO_IS_VALID(port))
- return ~0;
val = in_le32((u32 __iomem *)(port+pci_io_base));
if (EEH_POSSIBLE_ERROR(val, u32))
return eeh_check_failure((void __iomem *)(port), val);
static inline void eeh_outl(u32 val, unsigned long port)
{
- if (_IO_IS_VALID(port))
- out_le32((u32 __iomem *)(port+pci_io_base), val);
+ out_le32((u32 __iomem *)(port+pci_io_base), val);
}
/* in-string eeh macros */